Dissertation > Excellent graduate degree dissertation topics show

Research on Photoelectric Torque Sensor

Author: LiNaNa
Tutor: WuBoNong
School: North China University of
Course: Mechanical and Electronic Engineering
Keywords: Optical Pickup LabVIEW torque measurement Photoelectric detection
CLC: TP212
Type: Master's thesis
Year: 2009
Downloads: 224
Quote: 2
Read: Download Dissertation


Rotating torque is an important working parameters of rotating power machinery, torque measurement is one of the important contents in transmission line, through the torque analysis, the performance parameters of the entire transmission system can be obtained.Mechanical torque measurement is more complex than other measurements, is a relatively weak link. At present, the comparative universal of the torque sensor is contact-type measurement,using strain gauges affixed to axis, but the measurement axis by the material, shape, etc. a greater impact, but also faced with a complex problem wound. The non-contact measurement methods include two categories: magnetic-electric, photoelectric. As the magnetic field, the interference temperature in magnetic-electric measurements,the measurement accuracy will be affected. so the search for photoelectric measurement methods is very important. Torque sensor for existing shortcomings, along with the rapid development of optical technology.The subject studies the principle of photoelectric torque sensor, proposes a non-contact torque sensors by combining photovoltaic technology.Select two cross-sections of a certain distance on the measured shaft as measurement objects, by measuring the two-section relative twist angle to obtain the value of shaft torque indirectly. The subject uses a Ooptical Pickup as the main optical component,designs laser receiver circuit to obtain signal which includes the relative twist angle information, then,LabVIEW program to solve the follow-up work.In order to improve the measurement accuracy, the subject use laser to lithography two-section stripes and signal processing part in the follow-up, design the solver procedures of whole multiples stripes and non-integer multiples of stripes, Stripe between the two parts will be further broken down, enhance greatly the measurement accuracy.The subject carries out a tested study on the prototype studies of photoelectric torque sensor,the use of such non-contact measurement method can achieve static measurements, dynamic measurements can be achieved also. Combination of the LabVIEW virtual instrument software platform for the follow-up the processing of signals, but also greatly save development time sensors,makes optical, mechanical, and other virtual instrument combines clever.

Related Dissertations

  1. Image Analysis System of Metal Transfer of Gas Metal Arc Welding,TG444
  2. Research on Nozzle Plume Temperature Distribution Measurement System,V434
  3. The Electrostatic Dust Removal System Based on Microcontroller and LabVIEW,X701.2
  4. Oil -in-water type emulsified oil water hammer harmonic LabVIEW Simulation and Experimental Research demulsification,X703
  5. LabVIEW-based virtual oscilloscope design and remote control,TM935.3
  6. Axial fan blade vibration non-contact measurement,TD441.2
  7. Exploration and Analysis of Electronic Detection of Raw Silk’s Flatness,TS147
  8. Control System Research for a Nano-Material Mixer,TP273.5
  9. Simulation System for Aluminum Foil Cold Mill and Research of Tension Control,TG334.9
  10. Research and Application of Remote Virtual Instrument Experimental Teaching System Based on LabVIEW,TP391.6
  11. Multi-channel Real-time Online Monitoring System for Polymerizers,TP274
  12. Research on Thin-Film Hysteresis Loop Measurement System Based on Extraordinary Hall Effect,O484.43
  13. The Research and Design of a Fire Detection System Based on Combustion Audio Recognition,X924.4
  14. Research of Control Strategy Based on the Electro-hydraulic Proportional Position Control System,TH137.52
  15. Development and Experimental Study about Virtual Instruments of Vibration Test and Analysis System and Combustion Analyzer,TK407
  16. Based on closed-loop control design electrical nerve stimulation,R742.1
  17. Large span structural health monitoring system,TU399
  18. Based on Virtual Instrument Simulation Load Test System Design,TP274
  19. With wireless transmission function digital torque measurement systems research and development,TH823
  20. Resonant vibration load fatigue testing system model predictive control technology,TH87
  21. Freescale DSC and GPRS -based remote wireless ECG monitoring system,TH772.2

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation components,parts > Transmitter ( converter),the sensor
© 2012 www.DissertationTopic.Net  Mobile