Dissertation > Excellent graduate degree dissertation topics show
The Pattern Design and Signal Simulation of PCSS Based on Autocorrelation Measurement
Author: GaoXia
Tutor: LiuQingGang
School: Tianjin University
Course: Measuring Technology and Instruments
Keywords: ultrafast electric signal photoconductive switch AFM anodic oxidation photoconductive sampling autocorrelation measurement
CLC: TN25
Type: Master's thesis
Year: 2008
Downloads: 51
Quote: 0
Read: Download Dissertation
Abstract
|
With the development of science and technology, high-speed electronic devices and optoelectronic devices are developing very quickly. These high-speed devices have very broad bandwidth, which is far more than the capability of the pure electronic technology, so new measurements must be studied.This paper is designed in accordance with the purpose of developing ultrafast measurement. In it an ultrafast photoconductive switch is designed and fabricated with traditional lithography process and atomic force microscope (AFM) anode induced oxidation technology. An autocorrelation theory is studied and the photoconductive switch’s autocorrelation measurement system is designed.The main contents of this paper include:1. Via summing up the previous analysis on the AFM oxidation experiment, the best experiment conditions were found to process titanium dioxide: 8V DC bias, 0.1μm / s scanning speed, and 30%~50% relative air humidity. In the given conditions, six titanium dioxide lines were made, all of which had good continuity and Uniformity.2. By comparing various common photoconductive materials, GaAs was chosen as the substrate of our photoconductive switches. And a good transmission lines pattern was designed to establish the autocorrelation measurement system.3. The principle of the autocorrelation measurement was analyzed, and its system was designed. The performance of the system was demonstrated.4. An equivalent circuit module of the photoconductive switch was explained, and the output of the signal generator and the sampling gate in the system were calculated respectively, and the waveform of each switch was simulated via MATLAB software.
|
Related Dissertations
- High power GaAs photoconductive switch design technology,TN365
- Narrow Pulsed Power Source,TN86
- Research of Characteristic and Application of the Photoconductive Semiconductor Switches,TN25
- A Novel Combined Switch Based on GaAs PCSS and Sparp Gap: Experiments and Analysis,TN25
- Damage and Longevity of GaAs PCSS under High Voltage and Strong Current,TN25
- Analysis of Combined Switch Volt-Time and Transient Characteristics,TN25
- Lower frequency integrated UWB antenna array antenna,TN822.8
- Investigation of High-Voltage Ultra-Fast Electromagnetic Pulse Radiation Characteristics and Experimental Rules,TN925
- Transient Characteristics of a Nonlinear GaAs Photoconductive Semiconductor Switch Based on Spark Gap,TN25
- Study on Phenomenon of Series MIM Structure in Nanoscale Based on Ultra-Fast PCSS,TB383.1
- Studies on the Performance Characterization of Utra Fast Photoconductive Switch,TN36
- The Nano-Fabrication of Ultra Fast Photoconductive Switch,TN29
- Used in photoconductive terahertz generation switching technology research,TN25
- Electro-optic sampling technique based on ultra high speed photoconductive switch test Method,TN29
- Generation of Steady and Jitter-Free Ultra-Fast Electrical Pulses with Photoconductive Switches,TN365
- Investigation of Ultra-Wideband Microwave Generation Based on Gaas Photoconductive Semiconductor Switches,TN29
- Study on the Electro-optic Sampling System for Ultrafast Electrical Signals,TP274.5
- THz Pulse Generation and Detection,TN782
- Studies on the Fabrication of Novel Ultra Fast Photoconductive Switch,TG506
- Study on THz Radiation and Photo-carriers Transportation Characteristics by Means of Monte Carlo Simulation,TN201
CLC: > Industrial Technology > Radio electronics, telecommunications technology > Photonics technology,laser technology > Optical waveguide and integrated optics
© 2012 www.DissertationTopic.Net Mobile
|