Dissertation > Excellent graduate degree dissertation topics show

Performance of Ce- and La- Incorporated KIT-6 Supported Cobalt Catalysts for Fischer–Tropsch Synthesis

Author: TanGuoDong
Tutor: LiJinLin
School: Central South University for Nationalities
Course: Physical and chemical
Keywords: Fischer-Tropsch Synthesis KIT-6 Co Ce-incorporated La-incorporated
CLC: TQ529.2
Type: Master's thesis
Year: 2011
Downloads: 67
Quote: 1
Read: Download Dissertation

Abstract


Fischer-Tropsch synthesis （FTS） is a gas-to-liquid （GTL） technology, which catalytically converts carbon monoxide and hydrogen into transportation fuels and chemicals. Among typical FTS catalysts （Fe, Co, Ni and Ru）, the cobalt catalyst is preferred due to its high selectivity for heavy hydrocarbons, lower activity for water-gas shift （WGS） reaction than iron catalysts and lower price than ruthenium.In the present work, A series of Ce- or La- incorporated into the structure of KIT-6 mesoporous molecular sieves with different Ce or La contents were synthesized by a direct hydrothermal process. Samples of Ce- or La- loaded KIT-6 material were synthesized by the incipient wetness impregnation technique. Catalysts with 15 wt% Co loading on the above supports were also prepared by the impregnation method. The supports and catalysts were characterized by X-ray diffraction, transmission electron microscopy, diffuse reflectance UV-vis, X-ray photoelectron spectroscopy, solid-state 29Si magic-angle spinning nuclear magnetic resonance, N2 physisorption, H2 temperature-programmed reduction, H2 temperature-programmed desorption and oxygen titration. The catalysts activity and selectivity were evaluated in a fixed-bed reactor under typical hydrocarbon synthesis conditions. The main results are as follows:1) The structure of the KIT-6 support was well retained after Ce incorporation. The samples of xCe-KIT-6 have both Ce3+ and Ce4+ sites in the framework. Catalysts with 15 wt % Co loading on the xCe-KIT-6 and 0.06Ce-KIT-6-I were prepared by the impregnation method. The percentage reduction of the 15Co/xCe-KIT-6 increased slightly for catalysts with low Ce content and decreased significantly with high Ce content. Small amounts of Ce were found to improve the activity of cobalt catalysts, and increase the selectivity to C5+ hydrocarbons of the Co catalysts for Fischer–Tropsch synthesis, while larger amounts of Ce had the reverse effect. Meanwhile, methane selectivity shows an opposite trend to C5+ selectivity. Ce-loaded KIT-6 supported Co catalyst presented lower activity than KIT-6 supported Co catalyst.2) The structure of the KIT-6 support was well retained after La incorporation. Small amounts of La incorporated into the framework of KIT-6 promoted the percentage reduction of catalysts, and the large amounts of La decreased it. The trend in the catalyst dispersion of the 15Co-yLa-KIT-6 increased and then decreased with increasing La content. Small amounts of La were found to improve the activity of cobalt catalysts, and increase the selectivity to C5+ hydrocarbons of the Co catalysts for Fischer–Tropsch synthesis.3) The same amounts of Ce or La as a promoter, Ce or La incorporated into the framework of KIT-6 had a higher activity more than Ce or La loaded at the surface of KIT-6.

Related Dissertations

  1. A Study on the Electrodeposition of Zn-Co and Zn-Ni Alloys in the Reline Room Temperature Ionic Liquid,TQ153.1
  2. The Design and Implementation of Security Mechanism of Embedded Dependable Computer,TP309
  3. Establish a Quantitative Method and Its Kit for Detection of Escherichia Coli and Salmonella. Spp,S154.3
  4. The True Estimations of China’s Unemployment and the Re-examination of Okun’s Law,F224
  5. Organizational Operation Research of Primary and Secondary School Co-operation Committee,G636
  6. Experimental Study and Analyses of O2 -CO2 Production Based on Chemical Looping Method,O611.3
  7. Of Bi N Co-doped TiO \u003csub\u003e 2 \u003c/ sub\u003e of the preparation and performance,O614.411
  8. Preparation and Performance of Chelant for Recycle Noble Metal Co from Spent Li-ion Battery,X76
  9. Development of Subunit Vaccine of Streptococcus Suis Type 2 and Actinobacillus Pleuropneumoniae,S858.28
  10. Research on Design and Practice of Educational Video Co-Construction and Sharing Platform for the Public,G434
  11. The Establishment and Application of cPL Double Anti-Body Sandwich Elisa Method for the Diagnosis of Canine Acute Pancreatisis,S858.292
  12. Influences of Temperature on SCF/c-kit Prolifertation Pathway and Cell Cycle of Rat Spermatogonial Cells Cultured in Vitro,R698
  13. Rubber - cobalt - nickel- Preparation of adhesion promoters,TQ430.1
  14. Controlling the morphology of cerium -based oxides Preparation and Catalytic Oxidation,O614.332
  15. Design and Realization of the AAC ZigBeePRO Development System,TN929.5
  16. Preparation of Different Morphological Silica Nanoparticles Via Polymer Template,TB383.1
  17. The Clinical Significance and Correlation Study of AML1-ETO9a Isoform in AML-M2 with T(8;21),R733.7
  18. Application Value of Non-COIDS STR and X-SNP Markers for Diffiuclt Relationship Testing,D919.2
  19. Low-Frequency Magnetic Pulsing Effect as Well as EET Study of Amorphous Alloy Fe43Co43Hf7B6Cu1,TG139.8
  20. Research on Composite Hard Anodic Oxidation of Aluminum Alloys and Mechanism,TG174.44
  21. Effect of Thermal Deformation on the Structure and Magnetic Properties of Ni45Co5Mn36.7In13.3,TG139.6

CLC: > Industrial Technology > Chemical Industry > Coke chemical industry > Coal liquefaction > Indirect liquefaction
© 2012 www.DissertationTopic.Net  Mobile