Dissertation > Excellent graduate degree dissertation topics show

Study on the Combing Process of Multi-power Driving Combing Machine

Author: LiuLingLi
Tutor: GuHongBo
School: Donghua University
Course: Mechanical Design and Theory
Keywords: comber multi-power driving combing process process optimizing combing speed
CLC: TS103.225
Type: Master's thesis
Year: 2009
Downloads: 45
Quote: 0
Read: Download Dissertation

Abstract


Comber is a widely applied spinning machine which has been an important equipment in spinning industry.With development of the technology of cotton spinning,the requirement for comber has also been increased enormously.Considering of the disadvantages lie in traditional comber such as:complex mechanical drive,high cost for optimization, difficulty of controlling the movement curve,difficulty of improving the speed by changing mechanical structure and so on,this disquisition brings forward a totally new concept-----comber with multi-power driving in order to simplify the mechanical drive system and improve the process speed.This new comber will be driven by several powers at the same time with many improvements for its mechanical drive system. Consequently,the whole process can be optimized successfully.Chapter I Summarize the research background and the development of comber,briefly introduce the processing assignment and the technique procedure and also expound the content of this research.Chapter II Analyze and study the work flow as well as the main parts of conventional comber in order to build a firm foundation for the following reform and design of the process system. Chapter III Bring forward the scheme of optimizing combing process considering of the disadvantages of traditional comber and then compare the new process with the old one.Chapter IV Analyze the relationship among improved process, cylinder speed and detaching roller speed and then analyze and figure out several key parameters during combing process including time of cotton fiber’s rising up,time of detaching roller’s movement and the maximum of cylinder speed.In addition,we also carry out some experiments and successfully prove the above analysis and results by some validations.All these can be very helpful for applying and spreading the new combing process.Chapter V Summarize the content and outcome of this research and propose the way for further research.

Related Dissertations

  1. The Simulation of Ocean Waves in Virtual Reality,TP391.9
  2. The Mechanism Design and Kinematic Simulation of the Auto-Lap-Changing and Auto-Piecing Device in Combing Machine,TS103.225
  3. Study on the Mechanical Property of the Digital Multi-power Drive Comber,TS103.3
  4. Portland stone hot forging process optimization of production and management company,F426.4
  5. The Research of Manufacturing Technology and Properties of Bamboo/Wood Composite Orient Strand Lumber,TS65
  6. Cashmere / wool combed blended product research and development,TS136
  7. The Optimizing Study on Aerobic Composting of Dairy Farm Dejecta,S141.4
  8. Study on the Preparation and Properties of Particulate Reinforced Copper Matrix Composites Fabricated by Composite Electroforming,TG249.9
  9. An Applied Research about the Human Resource Informatization Management of the Small and Medium-Sized Enterprise,F272.92
  10. The Study on the Supply Chain Procurement Management in JBL Company,F274
  11. The Analysis of the Nipper Mechanism and the Research on the Electrical System of the Combing Machine,TS103.33
  12. The CRM Study of the Agricultural Bank of China .Lian Yun Gang Branch,F832.2
  13. The Separation and purification for New Antibiotic AGPM and Process Optimizing,TQ465
  14. Improvements to reduce ammonia process raw gas Organic Sulfur,TQ113.2
  15. Based on Petri nets , process optimization and reorganization of the Applied Research,TP301.1
  16. Research on the Electrical System of the Comber Equipment,TS103
  17. Research on the Electrization of the FA269A Comber’s Driving System,TS103
  18. The copper mine ventilation system Dahongshan optimize the transformation of research,TD724
  19. The General Aviation epoxy curing and phase behavior of,V250.2
  20. Vibration Analysis and Dynamic Balance for the Headstoct System of CM500 Cotton Comber,TS103.225

CLC: > Industrial Technology > Light industry,handicrafts > Textile industry,dyeing and finishing industry > General issues > Textile industry machinery and equipment > Spinning equipment ( textile machinery ) > Former textile engineering equipment > Comber , gill
© 2012 www.DissertationTopic.Net  Mobile