Dissertation > Excellent graduate degree dissertation topics show

Design and Research on Preheating System of Hot Blast Stove for High Temperature

Author: LiJing
Tutor: HuaJianShe
School: Xi'an University of Architecture and Technology
Course: Iron and steel metallurgy
Keywords: blast temperature hot blast stove preheating combustion
CLC: TF578.2
Type: Master's thesis
Year: 2009
Downloads: 130
Quote: 1
Read: Download Dissertation

Abstract


With the ironmaking technology progress,the BF gas depletes and heating values decrease,while the fules with high heat value lack like coke oven gas.Under this situations,enhancing hot blast temperature and thermal efficiency will be an important topic in order to save energy and increase pulverized coal injection in the ironmaking process.In this thesis,the blast temperature present situation of iron and steel industry in our country is investigated and the main reasons of low blast temperature are analysed.And putting forward to the preheating technology to warm up the air and gas is a good approach to gain the high blast temperature of hot blast stove.This thesis bases on the problem which is low blast temperature of hot blast furnace in No.4 BF at ironmaking plant.Its running states and limitation factors of blast temperature increasing are analysed through thermal efficiency diagnosis test.On this basis, discussing at the present of BF gas situation,adopting the additional burner double preheating system process rebuilds the blast system of hot blast stove.Including designing the double preheating system processing flow,thermal calculation and type choice and designing of the main equipments such as combustion furnace and heat exchanger.At last,the double preheating system is studied and economic profits of putting into production are reckoned.Double preheating system designed in the actual application confirms that hot blast stove that burns 100%BF gas can entirely reach the anticipation target of 1200℃,the thermal efficiency of hot blast stove reaches more than 79%,and waste gas temperature reduces from 260℃to 140～170℃.The BF for high blast temperature can be met,the heat resources of waste gas are recovered and the comprehensive utilization of waste gas is realized.

Related Dissertations

  1. Experimental Study on Pyrolysis and Combustion Characteristics of Paint and Tar Based Single Hazardous Wastes,X705
  2. Pattern Classification of Combustion Modes in Scramjet,V235
  3. Experimental Study on Combustion Characteristics of Corn Straw in a Fixed Bed,TK16
  4. Numerical Simulation of Biomass Direct Reburning,TK16
  5. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  6. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  7. Experimental Study and Analyses of O2 -CO2 Production Based on Chemical Looping Method,O611.3
  8. Cobalt Ferrite and Its Performance,O611.4
  9. Oil sludge production and use of coal- water slurry experimental study,TQ536
  10. Design and Analysis of Automatic Steel Pipes Butt Tool,U673.38
  11. Simulation Study on the Spray and Combustion Characteristics of LPG-DEM Blends on the DME Engine,TK437
  12. Stainless Steel Bright Annealing Furnace with Waste Heat Recovery Energy-saving Technology Research,TG155.1
  13. Coal-fired Power Plants Denitration Transform Research and Practice,X701
  14. The System Design and Computational Fluid Dynamics Simulation for Chemical Looping Combustion,O35
  15. The Research and Design of a Fire Detection System Based on Combustion Audio Recognition,X924.4
  16. Br-impregnated Calcium-based/mineral Sorbents for Mercury Removal from Flue Gas,X701
  17. Experimental Study of Mercury Removal with Wet Flue Gas Desulfurization System,X773
  18. Study on Mineral Transformation Mechanism During High-silicon Coal Combustion and Agglomeration of Fine Particles,TK16
  19. Image Processing-based Modelling and Optimal Control of Combustion in a W-shaped Flame Boiler,TK229
  20. In-furnace Temperature Information Included Combustion Optimization of a Utility Boiler,TK227.1
  21. Numerical Modeling and Experimental Study on Combustion of Natural Gas Engine,TK437

CLC: > Industrial Technology > Metallurgical Industry > Ironmaking > Blast furnace (BF ) > Hot stove > Design and calculation
© 2012 www.DissertationTopic.Net  Mobile