Dissertation > Excellent graduate degree dissertation topics show

Research in the Vibration Response of the Thin Wall Composite Structure under Random Acoustic Loading

Author: ZuoAiFang
Tutor: ShaYunDong
School: Shenyang Institute of Aeronautical College
Course: Aerospace Propulsion Theory and Engineering
Keywords: Composite Materials Laminated Plates Sonic Fatigue Vibration Response Transverse Shear
CLC: TB33
Type: Master's thesis
Year: 2009
Downloads: 115
Quote: 0
Read: Download Dissertation

Abstract


This paper studied the vibration response calculation and analysis of the thin wall composite structure under random acoustic loading. This is the basis of researching the problem of the thin wall composite structure sonic fatigue problem.This paper is based on the study of theory and methods. Firstly, this paper use of the Miles single degree of freedom theory which assumes that the fundamental frequency response of structure is principal, the large deflection nonlinear forced vibration differential equation of the laminated composite plates subjected to random acoustic excitation are derived, in this differential equation transverse shear is considered. Secondly, in order to derive the nonlinear mode equation of the laminated composite plate , we use the improved of Garlerkin method. For sloving the mode equation, the equivalence linearization method is adopted to linearize the mode equation, The statistic characteristics of the displacement response are obtained by using the input and output relations of a linear system, Then, the responses of stress and strain are derived. Finally the calculation programmes are writed by using Matlab and the estimation of the displacement and stress response of a laminated composite plate under acoustic load are realized. Calculations of displacement and stress response of a laminated composite plate with different material anisotropy, different acoustic load, different edge conditions and different fibre orientation angles are accomplished, Then, mean-square response with transverse shear and no transverse shear by small deflection theory and large deflection theory are calculated, and the characteristic of mean-square response are compared and analyzed with different acoustic load, The statistic characteristics of mean-square response of laminated composite plate with different theory is compared.The simulation methods presented in this thesis for calculating the vibrational response of aircraft laminated composite plate structure in an elevated thermal environment and the calculated results are of great values to analyze and solve the sonic fatigue problem and improve the structure dynamic strength.

Related Dissertations

  1. Preparation and Characteration of Composite Microspheres with Dual-, Triple- Responsive Properties,O631.3
  2. Preparation of Surface-functionalized Graphene and Its Influence on the Mechanical Properties of Nanocomposite Materials,TB332
  3. Multiscale Asymptotic Analysis for Elastic Problems of Composite Materials and Mixed Finite Element,O411.1
  4. Novel fragile Composites,TB332
  5. Experimental Study on Composite Thin-walled Cylindrical Shell Vibration of Composite Materials,TB533
  6. Alloy Powder Effect on Microstrcture and Interface WC/Steel Surface Composites,TB331
  7. Research on Interface Properties of Composite Seal Material Composed with Metal and Fluorine Rubber,TQ333.93
  8. Ferroferric Oxide /micro Silicon Powder Preparation and Properties of Composite Materials,TB332
  9. Fabrication and Characterization of HAP/SiO2 Bioceramic Composites,R318.08
  10. Study on Chitosan and Its Composite Membranes Used for Melanocyte Culture and Transplantation,R318.08
  11. Degradation Behaviors of Electrospun Fibers of Poly(DL-lactide) and Hydroxyapatite and the Hot-pressed Composites,R318.08
  12. High volume fraction SiCp / Al infiltration mechanical properties of composites research,TB333
  13. Structure and Properties of Polypropylene/waste Plastics Multilayer Plates Composites,TB383.1
  14. Preparation and Properties of Flexible Packaging Materials for Lithium-ion Batteries,TB484
  15. Preparation and Energy Harvesting Effect Analysis of Cement-based Piezoelectric Composites,TB332
  16. Reserch of Nickel Plating Carbon Nanotubes and CNTs/SiCp/Mg Composites Material,TB383.1
  17. Preparation and Performance Research of Ni-based Self-lubricating Composites,TB33
  18. Preparation and Properties of Lioght Weight Refractory Used in Radiant Cooker and Fireplace,TQ175.1
  19. Research on Preparation and Properties of Co3O4 and Its Composites,TQ174.1
  20. Optimum Design of Handing Composite Chimney Based on the Genetic Algorithm,TU233
  21. Suspension Casting production of high boron phase / iron-based composite materials technology research,TB333

CLC: > Industrial Technology > General industrial technology > Materials science and engineering > Composite materials
© 2012 www.DissertationTopic.Net  Mobile