Dissertation > Excellent graduate degree dissertation topics show

The Kinematics Analysis and NVH Parameters Matching Optimization of Twist Beam Suspension Based on Multi-Body Dynamics

Author: HeYanZe
Tutor: WangQiDong
School: Hefei University of Technology
Course: Vehicle Engineering
Keywords: twist beam suspension Structure Parameterized Modeling Parameters matching Vibration
CLC: U463.33
Type: Master's thesis
Year: 2009
Downloads: 405
Quote: 2
Read: Download Dissertation

Abstract


As a major component of vehicle, the suspension system has an important impact on the vehicle performance,such as ride comfort, handling stability and NVH characteristics. Suspension kinematics and dynamics analysis, as an important aspect of suspension design, is attached more and more attention. With the development of technology, the dynamics analysis software is applied in vehicle’s design and manufacture etc.At first,The article introduces the structural characteristics of twist beam suspension. The model would have to consider the impact of elastic deformation of the twist beam. The writer uses two methods to set up the twist beam suspension model, runs its kinematics analysis separately, and compares the results. Based on the structure parameterized modeling bulit in ADAMS FLEX, the writer analysises the impact of the structural parameters on the kinematic performance.The other subsystems, such as front suspension, the steering system, tires subsystems, chassis and so on, are also built in ADAMS software. They are assembled together with the rear twist beam suspension to compose a whole muti-body model. The flexible deformation of the subframe ia also considered.The paper writers an function to calculate root mean square of weighted acceleration in ADAMS, achieves the goals to directly optimize root mean square of weighted acceleration in ADAMS. Based on vehicle dynamics simulation, the paper optimizes the twist beam suspension parameters using DOE(Design of Experiments) method. The optimization improves the vehicle vibration performance.At last, the paper analysises the characteristics of twist beam suspension while transmissing high frequency vibration,researches the impact sensitivity of suspension bushing components on the vehicle vibration using ADAMS DOE. According to the analysis results, the autor specifically analysises the impact of key bushing components on improving vehicle NVH performance.

Related Dissertations

  1. Study on Theory and Experiment of Wire Drawing with Composite Ultrasonic Vibration,TG663
  2. Research on the 6-Dof Fault Tolerant Control of the Vibration Isolation Platform with Eight Actuators,TB535.1
  3. The Study of Control Algorithm for Automotive Power Window Based on Lin Bus,U463.6
  4. The Equivalent Circuit Model of Radial Vibration Mode Piezoelectric Transformer and Its Application,TM406
  5. Research on Structural Vibration of Steam Piping System,TK284.1
  6. Study on Reducing the Mower Vibration by Optimizing the Crank-rod Mechanism of 170F Engine,S817.111
  7. Closed thin-walled beams composite modal damping prediction,TB33
  8. Axial fan blade vibration non-contact measurement,TD441.2
  9. Research on the Prediction of Underwater Acoustic for a Survey Ship and Reduction for Its Noise and Vibration,TB53
  10. Experimental Research on Automobile Engine Inertia Parameters Identification,U467.2
  11. Analysis and application of large structure vibration test based on wireless sensor networks,TP274
  12. Vibrating force field mixed mechanism of plastic extrusion process,TQ320.66
  13. Anlysis and Control the Noise of Low Pressure Gear Pump,TH325
  14. The Vibration Synchronization and the Control of Amplitude in Sharp Resonance Vibration Machine,TB535
  15. Vibration Isolation Design of Powertrain Mounting System of a Commercial Vehicle,U463.33
  16. Random Vibration Response Control and the Patran Redevelopment,O324
  17. Study on a Portable Measurement and Analysis Instrument for Ships Shafting,U664.21
  18. The Research on Vibration and Sound Radiation from Single and Double Cylindrical Shells under Multi Forces,U661.4
  19. Study on Defect Inspection of Flip Chip Based on Ultrasonic Excitation,TN407
  20. Research on Distributed Fiber Optic Vibration Sensor,TP212.14
  21. Research on Vibration Checkout Gear of Marine Propulsion Shafting,U661.75

CLC: > Transportation > Road transport > Automotive Engineering > Automotive structural components > Travel System > Suspension
© 2012 www.DissertationTopic.Net  Mobile