Dissertation > Excellent graduate degree dissertation topics show

Effect of Technological Parameters on Microstructure of SiC Particulate Reinforced High Manganese Steel Matrix Composite with Process of V-EPC

Author: YangLei
Tutor: MaYouPing
School: Xi'an University of Architecture and Technology
Course: Materials Processing Engineering
Keywords: composite high manganese steel SiC particle decomposition
CLC: TG174.4
Type: Master's thesis
Year: 2009
Downloads: 126
Quote: 0
Read: Download Dissertation

Abstract


In order to improve the wear resistance of steel,and develop the particle reinforced steel matrix composite prepare technology with simple process and low cost, we choose the SiC particiate reinforced high manganese steel matrix composite prepared by process of V-EPC.We studied the microstructure of the composites in different conditions,and the relationship between the microstructure and the casting practice.The results indicated:First,there is a reaction of SiC particle with Fe when casting.The Si atoms diffused into the high manganese steel matrix and formed the solid solution alloy.The active C atom would diffuse into the matrix,too.That would lead to the precipitation of carbides or graphite microstructure.Secondly,the decomposition of SiC particles might be effectively inhibited under low pouring temperature or at faster cooling rate,and the far from the particles the less the carbides in the matrix.When the temperature increased or the cooling rate was decreased,the microstructure characteristics were:SiC particles decomposed completely,recarburization of steel obviously increased.This indicated that,the decomposition of SiC particle was sensitive to temperature.We can avoid the decomposition in some extend by control of temperature and cooling rate.Third,in view of the thermodynamic,the decomposition of SiC particles need enough thermodynamic driving force.And the reaction of Si atom with Fe atom would provide enough energy.As the pouring temperature increased the thermodynamic driving force increased.Fourth,in view of the kinetic,as the pouring temperature increased,the steel viscosity would be lower,the flow velocity of steel would be faster,and the molten steel would keep liquid state for longer,and all these were benefit for the compound. Moreover,the high temperature was benefit to diffusion,the inner layer of the particle would be decomposed.That led to the entire decomposition of the SiC particle.Last of all,as compared with the microstructure of different matrix,it indicated that,the high manganese steel matrix was better than the other matrix in obtaining better composite microstructure.The higher Mn and C contain in the high manganese steel can hinder the decomposition obviously.And the high manganese steel matrix which has good plasticity and toughness,can surport the particles better.The comprehensive properties would be better.

Related Dissertations

  1. The Preparation and Thermoelectric Properties of Rare Earth Subsituted Ag Composite Ca3Co4O9-Based Oxides,TQ174.1
  2. Synthesis and Characterization on Semi-Aromatic Polyamides Containing Benzoxazole Units,O633.5
  3. Synthesis, Structure and Properties of PBO/SWNT Composite Fibres,TQ340.64
  4. Study on Theory and Experiment of Wire Drawing with Composite Ultrasonic Vibration,TG663
  5. Technology of Filling Clearance and Optimizing the Bonds during Ultrasonic Brazing,TG454
  6. Study of Tin Alloy Carbon Composite Used for Lithium Ion Battery,TM912.9
  7. Research on Ionosphere Contamination of High Frequency Radar Echoes and Time-Frequency Analysis Technology,TN958.93
  8. Research on the Super-resolution Technologies of Polarimetric SAR Images,TN957.52
  9. The Algorithm of DFT with a Subset of Output Points Based on TS101 and Its Software Implementation,TN911.72
  10. Query Processing and Optimization in Massive Multi-Database Integration,TP311.13
  11. Research on Control System and Head of 7-Axis NC Fiber Placement Machine,TG659
  12. Municipal tourism land use planning environmental impact assessment,X820.3
  13. Research on the Theory of the Transmission-line Metamaterials and Their Applications,O441.6
  14. Of Bi N Co-doped TiO \u003csub\u003e 2 \u003c/ sub\u003e of the preparation and performance,O614.411
  15. Pd-based cathode catalysts of direct methanol fuel cell,O643.36
  16. Preparation and Characteration of Composite Microspheres with Dual-, Triple- Responsive Properties,O631.3
  17. Study on Technics & Performance of Nano Electroless Composite Plating on 20~# Steel,TQ153
  18. Research on Spinning Performance of Collagen and PVA Composite Solution,TQ340.64
  19. Technological Research on Preparation of High Activity Walnut Pulp by Ultrasonic-compound Enzyme Synergistic Method,TS255.6
  20. Ir surface NH 3 catalytic decomposition and oxidation reaction mechanism studies,X131.1
  21. Coal miners and practice unsafe behavior measurement,X936

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Metal corrosion protection,metal surface treatment > Corrosion control and protection > Metal surface protection technology
© 2012 www.DissertationTopic.Net  Mobile