Dissertation > Excellent graduate degree dissertation topics show

Microstructure and Properties of Ti3SiC2/Carbon Fibre Dispersion-strengthening/Cu-graphite Composites

Author: ZhaoQingBi
Tutor: XuShaoFan
School: Hefei University of Technology
Course: Materials Science
Keywords: ceramics particles Ti3SiC2 carbon fiber electroless plating Cu matrix composite physical and mechanical properties friction and wear
CLC: TB332
Type: Master's thesis
Year: 2009
Downloads: 165
Quote: 1
Read: Download Dissertation

Abstract


With the motor on the current density and speed of the circle becoming higher and higher,the requirement for the quality of the brush materials is also rising,which the previously used copper-graphite material can not meet.In this paper a fact is elaborated that the performance of the composite materials can be improved when the part of graphite is replaced by copper coating Ti3SiC2 and carbon fiber.The interfacial adhesion between Ti3SiC2、carbon fiber and copper matrix of the composite coating can be increased by copper coating processing. Ti3SiC2 particle surface was coated with copper by electroless plating method without sensitization and activation.The influenece of temperature,pH value, CH2O and loading capacity on copper coating were studied.In doing so we finally got the appropriate copper process.The result indicates that smooth and compact layer can be gained when the temperature is 55～60℃,pH value about 12.5, initial concentration of CH2O 16 ml/L,loading capacity of 3 g/L and time for electroless plating 20～30min.In order to embody the strengthening function between copper coating processing and copper matrix;copper-coated-Ti3SiC2-Cf-Cu-graphite matrix composites which were obtained by powder metallurgy process was compared with Ti3SiC2-Cf-Cu-graphite matrix composites,and its mechanical properties were tested.The results show that with the increase of the content of Ti3SiC2 and carbon fiber the composite materials’ density,the conductive rate,hardness,the bending strength are increased;In the same components,when copper-coated -Ti3SiC2-Cf-graphite-Cu matrix composite is compared to the Ti3SiC2-Cf-graphite-Cu matrix composite,the performance of the former is superior to that of the latter. It is clear that copper coating Ti3SiC2 and carbon fiber helps to promote the interfacial adhesion of both of the elements with the copper matrix,thus strengthening the property of the composites.The frictional wear tests were carried out on six composites with different components.The results show that whether the line speed be 5m/s or 10m/s,in the same components,the frictional wear of copper-coated-Ti3SiC2-Cf-graphite- Cu matrix composite is superior to that of Ti3SiC2-Cf-graphite-Cu matrix composite. The friction coefficient of the composite material is decreased with the increase of the line speed.When six groups of composite materials are compared,it is found that the wear resistance of composite materials and the performance are excellent when the part of graphite is replaced by 2%copper coating Ti3SiC2 and 1%carbon fiber.

Related Dissertations

  1. Study of Interaction between Epoxy Molecules and Carbon Fiber Surface with Molecular Simulation,TB332
  2. Reactive Hot-Pressing and Mechanical Properties of （ZrB2-ZrO2）/BN Composites,TB332
  3. Study on Technics & Performance of Nano Electroless Composite Plating on 20~# Steel,TQ153
  4. Carbon fiber reinforced epoxy resin surface treatment and interfacial properties of composite materials,TB332
  5. Preparation of Electroless Plating on Heat Transfer Surface with Low Surface Free Energy and Study on Their Anti-fouling Property,TK172
  6. Study of Composite Drive Shaft for an Automobile,U465.6
  7. ACCC conductor transmission line based Rehabilitation Study,TM755
  8. Preparation of PAN-based ACF electrostatic spinning process on the adsorption properties of,TQ342.742
  9. Endogenous iron-based composites and tribology research,TB331
  10. Mchanics Performance Analysis of the Super-span Cable-stayed Bridge with CFRP Cables,U448.27
  11. Carbon fiber reinforced composites embedded fiber Bragg grating sensing research,TN253
  12. Study on Graphite Composite of Radintor,TB332
  13. Study on Additives Modification and Application of Solid Lubricants Based on UHMWPE,TE624.82
  14. Automotive engine piston pin anti- friction and wear properties of,U464.13
  15. Laser Surface Alloying of Ultra-fine Ceramic Particles Reinforced Layer Onto Iron and Steels,TG174.44
  16. Study on the Tribological Properties of AlCoCrCuFeNi High-entropy Alloy in Hydrogen Peroxide,TG132.3
  17. Study on the Tribological Properties of the Amorphous Alloy in Hydrogen Peroxide with High Concentration,TG139.8
  18. Development of Functional Automotive Interior Textiles,TS106.6
  19. The Study of Electroplating Pretreatment on AZ91D Magnesium Alloy,TQ153
  20. Study on the Processing and Properties of Acrylate Rubber / Silicone Rubber Blends,TQ330.1
  21. Study on the Tribological Properties of Ptfe-Based Composites Materials Sliding Pair under Extreme Environment,TB332

CLC: > Industrial Technology > General industrial technology > Materials science and engineering > Composite materials > Non-metallic composite materials
© 2012 www.DissertationTopic.Net  Mobile