Dissertation > Excellent graduate degree dissertation topics show

The Research of Saving Energy Sources Controlling System about Burning Gas and Fuel in Kitchen

Author: ZhangWenLong
Tutor: ZuoJiaChao
School: Shenyang University of Technology
Course: Mechanical Manufacturing and Automation
Keywords: Energy conservation Singlechip Circuitry Ultrasonic Automation
CLC: TS914.232
Type: Master's thesis
Year: 2011
Downloads: 36
Quote: 0
Read: Download Dissertation

Abstract


With the development of industrialization progress, the consumption of fossi fuel which is nonrenewable resources is increasing everyday. Although the human being have already faced the risk of fuel depletion, it is difficult to altert the reliance on the fossil fuel in the near future. However, we can make some effort to decrease the waste of fossil fuel. Nowadays, the catering industry and kitchen all use the burning oil or gas cooking stove with blower, but it is a waste that about 50%-60% accumulated time is vacant combuation during the course of every cooking. The purpose of the reaearch was to decrease the kind of waste.We mainly study the burning oil or gas cooking stove that is frequently used in restaurant. Adding a control system on the burning oil or gas cooking stove which can save the energy automaticly without alterting the operation habit of cook at the same time. In this study, we designed the hardware circuit of the whole system based on the signal-chip microcomputer(SCM) energy-saving and control system of ultrasonic wave . In the design, SCM was used as a control device and the content included the design of transmitter circuit, receiving circuit, power system, implementation circuit and temperature compensation circuit. In the section of software control, the study mainly used C51 programming language to control the entire system, and the system working principle is as follows: The SCM sends the pulse signal of 40 KHz amplified by power amplifier to driving ultrasonic wave sensor, and the probe receives echo, then forms the interruption signals through a series of of treating for the purpose of measuring the distance. From the distance to judge whether to implement energy-saving operation, and finally achieve the purpose of energy-saving by the pot down,the fire burning and the pot leaving, the fire extinction.The study also designed the gas control valve of the system after the design of the hardware and software control section of the entire system, and mainly designed the inside nomimal diameter and the body wall thickness of gas control valve. Finally, we did relevant experiments about measuring the distance using the ultrasonic wave after the hardware circuit of whole system was correctly welded, then the relevant data was obtained and experimental error was analyzed.

Related Dissertations

  1. Study on Theory and Experiment of Wire Drawing with Composite Ultrasonic Vibration,TG663
  2. Technology of Filling Clearance and Optimizing the Bonds during Ultrasonic Brazing,TG454
  3. Gui Design and Application Oriented to Embedded Ultrasonic Detecting System,TP274.53
  4. Isolated systolic hypertension in patients with cardiac ultrasound characteristics of traditional Chinese medicine dialectical correlation exploration,R544.1
  5. Research of Multicast Protocol in Wireless Sensor Networks,TN929.5
  6. Dogs training management system based on WEB,TP311.52
  7. Optimization of Extraction of Gastrodin from Rhizoma Gastrodia by Response Surface Methodology,R284.1
  8. Study on the Interactive Mechanism of Energy Conservation and Pollution Reduction between Government and Enterprises,D922.68
  9. Research on the Problems and Countermeasures of Low Carbon City in Chongqing,X321
  10. Model Built and Research on Industrial Energy Conservation and Emission Reduction Efficiency Evaluation of Shandong Province,F427;F206
  11. In an army official document storage , archiving , query system development and implementation,TP311.52
  12. The Policy Research on How to Promote Energy Saving and Emission Reduction in Our Country under the Background of Low Carbon Economy,X321;F124
  13. Development of Flexible Manufacturing Teaching System,TH165-4
  14. Study of Ultrasonic Location for Partial Discharge in Transformer,TM855
  15. IEC101 Protocol Communication System Design of 110KV Substation Automation,TM63
  16. Electronic assembly process research and implementation assistance systems,TN05
  17. Word-based automated support system Dissertation Writing,TP311.52
  18. Ultrasonic deposition of spray forming blank Quality,TF124.39
  19. Reinforced concrete structures interfacial debonding damage ultrasonic guided wave detection technology,TU375
  20. Application Research of GIS Technology in Urban Planning Management Information System,TU984
  21. The Study of Ultrasonic Extraction Combine with Fenton Oxidation to Dispose the Phenol-Contaminated Soil,X53

CLC: > Industrial Technology > Light industry,handicrafts > Metal products industry > Hardware Products > Daily hardware products > Stoves and stove > Gas stoves and stove
© 2012 www.DissertationTopic.Net  Mobile