Dissertation > Excellent graduate degree dissertation topics show

Research of a Predictive Model of Thickness of Ring Formation in Oxidized Pellet Rotary Kiln

Author: ZhouXianLin
Tutor: ZhuDeQing
School: Central South University
Course: Iron and steel metallurgy
Keywords: oxidized pellet rotary kiln ring formation predictive model MATLAB simulation
CLC: TF321
Type: Master's thesis
Year: 2011
Downloads: 96
Quote: 2
Read: Download Dissertation

Abstract


With the rapid development of steel industry in China, the demand of oxidized pellets grows rapidly. But the traditional pellet process - shaft furnace has the shortage of small yield productivity and poor adaptability of raw materials, which cannot meet the growing demand of blast furnace charge. Meanwhile, roasting machine belt needs high temperature resistant alloy steel, which means the process is unable widely to promote temporarily in China. Therefore, to develop the grate-kiln process with mature technology, high production and strong adaptability of raw materials, appears especially important. But the process has a problem of ring formation which brings great trouble to improve the production and quality of pellets. So it has very important practical significance to build a predictive model of ring formation to predict the ring forming behavior in oxidized pellet kiln, and to know the real-time influence of the site operation parameters on ring formation. It has important meaning to guide the instant operation on ring formation.A heat transfer model of rotary kiln was built in this paper which based on the cylinder of the heat conduction differential equation after analyzing the heat transfer process inside the oxidized pellets kiln. And the boundary conditions were established. The thermal physical properties of ring materials were researched for the first time, and the result showed that the thermal conductivity of ring object decreases with the increasing temperature. It provided reference for the subsequent mathematical simulation of oxidized pellet kiln.Based on the correspondence between the kiln outer wall temperature and ring formation, and combined with kiln shell heat transfer model, a model of thickness of ring formation in rotary kiln was built based on certain assumptions. The model was verified correct by comparing the simulation results with site testing results.Simulation software MATLAB was used to program the thickness model of ring formation. The simulation results showed the temperature distribution along the axis of inner wall, and the thickness distribution of ring formation in different position of the rotary kiln. The calculated results of model were showed by graphical display based on the powerful graphics capabilities of MATLAB. Also a GUI of the model was designed which allowed site operators to analyze the producing process conveniently by using the simulation results of the model.The growth rate of ring was analyzed and calculated by historical temperature data. And the rate was used to predict the growth situation of ring. The MATLAB simulation results showed that the ring formation had a linear growth, which was used to predict the growth time of ring. Comparing with historical data, the predictive results were verified correct, so that it provided basis for ring forming prediction, and achieved early warning as to achieve stable operation of site equipment.

Related Dissertations

  1. The Study on Coal Ash Fusibility and Viscosity-temperature Characteristics,TQ530
  2. Circuit Design and Simulation of Proportional Valve Controller Based on CAN-BUS,TP273.5
  3. Research of Control Strategy Based on the Electro-hydraulic Proportional Position Control System,TH137.52
  4. TBM cutterhead system synchronization driven research,TM921.48
  5. Raw slurry feed ingredient batching process returns chaotic time series analysis and SVM Prediction,O211.61
  6. Study on DSTATCOM Application for Zhe-Gan Electrified Railway,TM922.3
  7. Research of Automatic Transmission Loading Control System,U463.212
  8. Autoabs Test Detection System Research and Development,U467.52
  9. Electrified railway power system harmonic detection and treatment of,TM935
  10. Research and Analysis for the Performance of Turbo-code in Atmospheric Laser Communication System,TN929.12
  11. Milling machine beams and hydraulic ram automatic balancing systems research,TG542
  12. Low Common-Mode Voltage Optimization PWM Control Strategy of Three-Level Inverter,TM464
  13. Research for Active Power Filter Based on Constant-Frequency Hysteresis Control Technology,TN713.8
  14. Research on Combination Design of Adaptive Filters,TN713
  15. Research on Fast Control Strategies of Active Power Filter,TN713.8
  16. The Research on Fuzzy-PID Controller,TP273.4
  17. Simulation and Reliability Optimal Design of Double Clutch Transmission,U463.212
  18. Rare Earth Extraction of Fuzzy self-tuning PID feed flow Intelligent Control System,TP273.5
  19. The Research of Predictive Control Methods for Multivariable System,TP13
  20. Research of Harmonic Detection Methods in APF,TM761.1
  21. Based on GPS/INS High Accuracy Navigation Technology Satellite Research,TP277

CLC: > Industrial Technology > Metallurgical Industry > Metallurgical machinery,metallurgical production automation > The ironmaking mechanical and production automation > Ironmaking mechanical
© 2012 www.DissertationTopic.Net  Mobile