Dissertation > Excellent graduate degree dissertation topics show

The Research and Manufacture of 200T Automatic Powder Metallurgy Press

Author: LiuFuE
Tutor: YuJin
School: Chongqing University
Course: Mechanical and Electronic Engineering
Keywords: powder metallurgy press servo adaptor hydraulic system proportional position control MATLAB
CLC: TF37
Type: Master's thesis
Year: 2011
Downloads: 153
Quote: 2
Read: Download Dissertation

Abstract


The property of powder forming press is a decisive factor for the quality of compacts as a key equipment of powder parts products line,wherever which restricts the development of powder metallurgy industry. At present, developed countries at abroad have produced powder presses that can applied to complicated shape、high required geometric tolerance、large batch compacts, and these countries possess mature hydraulic press based on the proportional technology that has been blockaded. The universities and institutes in the domestic which undertake the research for the high property powder press are few, in addition partial enterprises produce the powder press that has no perfect property and small scale, moreover the research of powder press at home and abroad focuses on improving the motion precision of the forming hydraulic press. In the thesis, the theory of powder pressing is analyzed based on the referencing the relative information in a few domestic universities which have been developing the powder press field, so the thesis has done a little preliminary research and designed the hydraulic system according to the theory.The thesis introduces the theory of pressing for the 200t powder press, servo adaptor and the craft of producing the compacts, the design and calculation of hydraulic system are completed on the basis of practical operation condition of the 200t powder press specificity and referencing the powder press hydraulic system at home and abroad. Starting guarantee the same pressing velocity for obtaining uniform compact density, the control system of the proportional direction valve is selected combining the advantages of the electric and hydraumatic, which has good control property to be controlled easily. Through calculating the parameter such as the flow and pressure of the hydraulic loop and components, the main components type are selected. The proportional position control of the main cylinder is the important composition of hydraulic control system of powder press, based on the consecutive flow equation of hydraulic system and force balance equation, the transferring functional mould of each link is set up, at last the block diagram of the transferring function is deduced for the whole valve controlling cylinder system, and the main parameter values in the model are determined.The builded system model is simulated and the property is analyzed and rectified using MATLAB and SISO TOOL for improving the system response velocity and stability, in the last, the position stiffness disturbed by the load is analyzed for the rectified system, the simulation result satisfy the control requirement of the powder press.

Related Dissertations

  1. Design of Reciprocatingwire Outfit of Mwedmand Research on It’s Control System,TG484
  2. Application Research of Digital Image Processing on Container Inspection,TP274.4
  3. S-lay Installation Analysis for Deepwater Pipeline,TE973
  4. The Research and Application of Software Reliability Test for User Right Management System,TP311.53
  5. Research and Application of Safety Assessment Method Based on Neural Network,X937
  6. The Design of Experimental Device for Mine Motor Soft Starter,TM343.2
  7. Research on Analytical Method to Calculate the over Voltage and Surge Impedance of Tower under Lightning,TM863
  8. Undersea robot plow trenching machine design and analysis,TE952
  9. Mining resources based on genetic algorithm optimization model of,O224
  10. SAR interferometric method for optimal selection,P225.2
  11. Sham hose drum drive means and hydraulic system of the structure,TE973
  12. Design and Realization of Signal Distortion Measurement System Based on Virtual Instruments,TP274
  13. The Basic Study on Semi-active Control of Damping Controlled to Serial Robot,TB535.1
  14. The Design of Telescopic Asphalt Spraying System,U415.524
  15. Research of Control Strategy Based on the Electro-hydraulic Proportional Position Control System,TH137.52
  16. An Acoustic System for the Detection of Sugar Content and the Hollow in Watermelon,TS255.7
  17. Based on the configuration king and Matlab trolley furnace control system design,TP277
  18. Defective products in the production process damper Automatic Identification,TB535.1
  19. Ceramic press the development of large flow proportional throttle,TH137
  20. New tamping unit design and characteristics of electro-hydraulic shaker,U216.6
  21. Concrete pumping system hydraulic shock and stroke deviation Optimization,TU646

CLC: > Industrial Technology > Metallurgical Industry > Metallurgical machinery,metallurgical production automation > Powder metallurgy machinery and production automation
© 2012 www.DissertationTopic.Net  Mobile