Dissertation > Excellent graduate degree dissertation topics show

Research on the Forging Properties of Magnesium Alloy and the Forging of Wedge Forming Process

Author: ChenXianGang
Tutor: DengZiYu
School: Shenyang University of Technology
Course: Materials Processing Engineering
Keywords: as-cast ZK60 and AZ80 multi-forging microstructure properties deformation of body wedged
CLC: TG319
Type: Master's thesis
Year: 2011
Downloads: 64
Quote: 0
Read: Download Dissertation

Abstract


Magnesium alloys have high potential for use as components in automobile, electronic device and aerospace application because of their low density, high specific strengthen, good electromagnetic shielding and good damping properties. There is abundant resource of magnesium on the earth. In recent years, the request of energy saving and environmental protection has promoted the rapid growth of magnesium alloys. Nowdays, most of the magnesium alloy products are produced by die-casting but they have low mechanical properties. Wrought magnesium alloys possessing good mechanical properties such as high tensile strength and high elongation were greatly concerned home and abroad.Two typical kinds of AZ80 and ZK60 owing high strength magnesium alloys were taken as the research object in this paper. First,both the as-cast ZK60 magnesium alloy,s multiple-forging and AZ80 magnesium alloy,s forging-out processes were experimented at blocks. During experimental process ,we find that temperature,deformating rate and pressure measured were great influenced to forging outcome, formulating proper forging process parameters.Then, the microstructure of ZK60 after forging were researched by Metallographic microscope,and found that the grains size did not reduce but grain boundaries separation material decreased as the increase of the forging ratio. Metallographic microstructure and component change of the AZ80 after forging were studied; the main mechanical properties were tested at room and high temperature; fracture morphology was observed by SEM and the texture during forging process was researched by EBSD.The results show that grains were small and homogenized gradually,the tensile strengths were increased at room temperature, fracture toughness of litter increasing trend distribution and uniform,and the texture was formed different from squeezing and rolling the types of the texture.At last, the process was designed and the die was made according to the wedge shape characteristic,and the deformation of body wedged was tested based on the experiment of free forging.

Related Dissertations

  1. PQ600 low alloy high strength steel welding HAZ microstructure and properties,TG457.11
  2. Existing Form of Nitrogen and Carbon in SWRH82B Steel and the Effect on the Microstructure and Properties,TG142.1
  3. Surface Coating of Ultrafine Ti(C,N) Powders for Preparation of Ti(C,N) Based Cermets,TB383.3
  4. Research on the Microstructure and Properties and Processing Simulation for Thixomolded Magnesium Alloy,TG146.22
  5. Study on the Crystallization Kinetics, Microstructure and Properties of B2O3-Al2O3-SiO2 Glass-ceramics,TG139.8
  6. Researches on Microstructures and Properties of Mg-6Zn-1Mn Wrought Magnesium Alloy,TG146.22
  7. 2024 aluminum alloy sheet heat treatment process and properties of,TG166
  8. Analysis on the Influence of Vanadium-Nitrogen Alloyed on Microstructure and Properties for High Strength Anti-corrosion Steel,TG142.13
  9. Study of Nb on Microstructures and Properties of Heat-Affected Zones in HSLA Steel with Large Heat Input Welding,TG457.11
  10. Effect of Lithium on Microstructure and Properties of Al-Si Series Cast Alloys,TG136.1
  11. Study on Brazing Process and Its Mechanism of Ti2AlC Ceramic to Copper,TG454
  12. Experimental Investigation of AZ80A Alloy Processed by Multi-Directional Forging and Equal Channel Angular Extrusion,TG115.53
  13. Research on Microstructure Property and Production Technology of Hot Rolling of X65 Pipeline Steel,TG335.5
  14. Single spiral mechanical stirring semi-solid slurry preparation technology research,TG292
  15. Microstructure and Properties of Mg-Al-RE-Ca Mg Alloy for Elevated Temperature Applications,TG146.22
  16. Effect of Rare Earth on Properties of MB8 Magnesium Alloys,TG146.22
  17. Effect of RE, Sb Combination Alloying on the Microstructure and Properties of AZ Wrought Magnsium Alloys,TG146.22
  18. The Broussonetia papyrifera fiber structure and properties of microwave - assisted the degumming process parameters optimization,TS123
  19. High Cycle Fatigue Behavior of AZ91 Series Magnesium Alloys,TG115.57
  20. In Situ Synthesis of (Ti, W)C Reinforced Steel & Iron Matrix Composites and Their Microstructure and Properties,TB331
  21. Study on Surface Strengthening by High-energy in Magnesium Alloy,TG174.4

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > Forging, forging and blacksmith > Non-ferrous metal forging
© 2012 www.DissertationTopic.Net  Mobile