Dissertation > Excellent graduate degree dissertation topics show

The Study on the Biodegradable Mg-Zn Alloys and Composites

Author: HeShengYing
Tutor: ChenMinFang
School: Tianjin University of Technology
Course: Materials Science
Keywords: Magnesium alloys Mechanical properties Corrosion resistance Hot extrusion Mg-matrix composites
CLC: TG146.22
Type: Master's thesis
Year: 2011
Downloads: 118
Quote: 0
Read: Download Dissertation

Abstract


Magnesium (Mg) alloys and Mg matrix composites are considered as promising biodegradable orthopedic implants due to their good biocompatibility and degradability. Their application in clinical medicine instead of stainless steel, titanium and other traditional medical metal biomaterial can effectively avoid the secondary surgery. However, the high corrosion rate and the low mechanical properties of biological safety magnesium alloy badly confined their application in clinical. Therefore, it’s one of the main approaches to develop Mg-based biomaterials with good corrosion resistance and high strength for the application of Mg in biomedical engineering.In this work, we smelted the Mg-3.0wt%Zn, Mg-3.0wt%Zn-0.8wt%Zr and Mg-3.0wt%Zn-1.0wt%Ca alloys. The effects of trace elements Zr and Ca on the microstructure and properties of Mg-Zn alloy system were investigated by microstructure observation, mechanical testing and in-vitro corrosion evaluations. The influence of hot extrusion with two extrusion ratio on the microstructure and properties of Mg-Zn-Zr alloy were also investigated. We also smelted xβ-TCP/Mg-3.0Zn-0.8Zr(x=0.5, 1.0, 1.5 in wt. %) and yn-HA/Mg-3.0Zn-1.0Ca(y=1.0, 3.0 in wt. %) composites and studied the influence of adding nano-particle reinforcement on the microstructure and properties of the composites. The results are summarized as follows:1. The addition of trace Zr or Ca could significantly refine the grains of Mg-Zn alloy system and improve its mechanical properties and corrosion resistance.2. Hot extrusion can refine the grain of Mg alloys, optimize the microstructure and properties of alloys. Furthermore, the as-extruded Mg-Zn-Zr alloy with a large extrusion ratio exhibited superior properties.3. Theβ-TCP and n-HA particles uniformly distributed in Mg-Zn-Zr and Mg-Zn-Ca alloys can refine the grains of Mg alloys. The mechanical and corrosive properties in the SBF of 1.0wt%β-TCP/Mg-3.0wt%Zn-0.8wt%Zr and 1.0wt%n-HA/Mg-3.0wt%Zn-1.0wt%Ca composites were improved compared with Mg alloys.

Related Dissertations

  1. Reactive Hot-Pressing and Mechanical Properties of （ZrB2-ZrO2）/BN Composites,TB332
  2. Microstructure and Mechanical Properties of Mg-Zn-Y-Zr Alloys,TG146.22
  3. Research on Electrochemical Synthesis and Application of Conductive Polyaniline,O633.21
  4. Structure and Characterization of Room Temperature Self-crosslinked Acrylonitrile-butadiene-styrene,TQ325.2
  5. Study on Influence of Preferred Orientation on Mechanical and Recoverable Properties of TN479 Shape Memory Alloy Sheet,TG139.6
  6. Study of the Preparation and Properties of the Trivalent Chromium Black Passivation with Non-cobalt Sulfate System,TG174.4
  7. The Study on Relationship between Drape Aesthetic Perception and Property of Mechanics,TS101.923
  8. Study on Chemical Coloring and Sealing Processing of Stainless Steel,TG177
  9. Study on Microstructure and Performance of Laser Cladding Ni-Based Amorphous Alloy Coatings,TG174.4
  10. Preparation and Properties of Reactive Thermal Sprayed Ternary Boride Cermet Coatings,TG174.4
  11. The Comparative Study on Ni-P and Ni-Ce/W-P Electroless Plating and Coating Performance on 27SiMn Steel,TQ153.12
  12. Electroless Ni-Pon the Bulk Nanocrystalline Ingot Iron,TQ153.1
  13. Study on Corrosion Resistance and Condensation Property of Ni-P/Nano SiO2 Composite Coatings,TG174.4
  14. Research on Organization and Performance of 490MPa Grade Fire-resistant Steel,TG142.73
  15. Studies on Hard Films of Stainless Steel by Magnetron Sputtering,TG174.44
  16. Study on Amorphous Formation Ability and Performance of Pt-Pd-Cu-P Alloys,TG139.8
  17. Research of Microstructure, Properties and Rare Earth Modification of Hot-dipped Aluminum on Carbon Steel,TG174.4
  18. Research on Microstructures and Properties of Modified A356 Aluminum Alloy in Lost Foam Casting Process,TG249.5
  19. Microstructure Evolution and Mechanical Properties of TiB+TiC+La2O3/γ-TiAl Alloys,TG146.23
  20. Study of Corosion Behavior of Magnesium Alloys in Commercial Engine Coolant,TG172
  21. Study on Alloying and Ageing Hardening of Mg-Zn-Al-Ca Magnesium Alloy,TG156.92

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Metallic materials > Non - ferrous metals and their alloys > Light non-ferrous metals and their alloys > Magnesium
© 2012 www.DissertationTopic.Net  Mobile