Dissertation > Excellent graduate degree dissertation topics show

Design of the Equipment for Snubbing Workover and Simulation of Its Hydraulic System

Author: WeiJing
Tutor: ChangYuLian
School: Northeast University of Petroleum
Course: Mechanical Design and Theory
Keywords: snubbing workover operation hydraulic system AMESim mathematicalmodels dynamic simulation
CLC: TE935
Type: Master's thesis
Year: 2011
Downloads: 102
Quote: 2
Read: Download Dissertation

Abstract


Studying on the mechanized snubbing workover equipment, this paper proposed thedesigned requirements of its hydraulic system based on the system project, the operatingprinciple and the workflow, also carried out the working conditions analysis of its executivemechanism load and movement. On the basis of all above, according to the calculation and therelated designed experience of this hydraulic system, this paper accomplished calculating theparameters and sketching up the hydraulic system diagram of its hydraulic system, alsoaccomplished selecting the components of the hydraulic power pack and hydraulic pumpgroups and layouting the rational system pipeline, in the end finished designing the hydraulicpump station structures of the mechanized snubbing workover equipment .On the basis of the theoretical research of the snubbing workover hydraulic systemdynamic characteristics, this paper built the mathematical models of the big arm system, theaided manipulator system and the derrick system through the analytical modeling method, andsimplified them as Hvalve controlled asymmetric cylinderHand quantitative pump - relief valveand other hydraulic units, it used for the simulation as the theoretical foundation.The simulation models of the big arm system, the aided manipulator system and thederrick system were built through the AMESim software to simulate by setting up theexperiment parameters. The test results were analyzed in order to master the dynamiccharacteristics of hydraulic systems and system parameters changes over time and proposerational suggestion for the hydraulic system optimal design, The curve also provides atheoretical reference for the actual structures of the hydraulic system.

Related Dissertations

  1. The Study of Dynamic Simulation of the Passive Dynamic Quasi-Quarupedal Walker,TP242.6
  2. 1200 tons automatic autoclaved fly ash brick molding equipment research and design of hydraulic systems,X705
  3. Undersea robot plow trenching machine design and analysis,TE952
  4. Sham hose drum drive means and hydraulic system of the structure,TE973
  5. Prediction and Simulation of Air Quality of Coal Mining Area Based on VGIS System,X831
  6. Centrifugal Flying Shear Dynamic Analysis and Optimization of Drive System,TG333.21
  7. The Research on Hydraulic System of Two-roll Straightening Machine,TG333.23
  8. The Design and Analysis of a Large Stewart Platform,TH112
  9. Dynamics Simulation and Analysis of Hoisting and Rotary System for Crawler Crane,TH213.7
  10. Research and Design of Hydraulic and Electrical Control System for Wheel Crane Telescopic Boom,TH213.6
  11. ZL16H Loader Virtual Prototype Modeling and Dynamic Simulation and Mechanics Research on Working Device,TH243
  12. The Design and Research of Top Drive Hydraulic System,TH137
  13. The Design of Telescopic Asphalt Spraying System,U415.524
  14. Tower-belt Structural and Dynamic Characteristics Simulation Analysis,TH213.3
  15. The Design of High-speed Bar Sheer Machine and Research on Key Technology of It,TG333.21
  16. System Design and Dynamics Analysis of a Rail Vehicle with High Acceleration,U270.1
  17. Study on the Structure of a New Type High Precision Adjusting Platform with Two-dimension,TH703
  18. The Design and Simulation for Pressure-control System of One Pressure Vessel,U661.7
  19. Research on Hydraulic Steering Servo Control System of An Underwater Vehicle,U664.41
  20. KES -based physical model tests of the fabric and appearance of the static and dynamic simulation,TS101.923
  21. Industrial valves electro-hydraulic position servo drive system and its application,TH137

CLC: > Industrial Technology > Oil and gas industry > Oil machinery and equipment and automation > Oil and gas production machinery and equipment > Workover mechanical equipment
© 2012 www.DissertationTopic.Net  Mobile