Dissertation > Excellent graduate degree dissertation topics show

The Study on Reflection and Absorption of Infrared Radiation Coating Using in Silicon Single Crystal Furnace

Author: YuNing
Tutor: ZhuLiJuan
School: Shenyang University of Technology
Course: Materials Science
Keywords: Infrared radiant coating reflectivity orthogonal experiment absorptivity
CLC: TQ630.7
Type: Master's thesis
Year: 2011
Downloads: 118
Quote: 0
Read: Download Dissertation

Abstract


Two kinds of coatings are investigated in this paper: one coating is high-reflection of infrared radiant coating and the other coating is high absorption of infrared radiant coating. The high-reflective coating is used on the surface of the graphite insulation tube of the thermal field to replace or reduce the original graphite felt insulation materials, so that part of the heat that is radiated to the graphite insulation tube by a heater can be reflected to heat space. The high absorptive coating is used on the surface of crystal pulling furnace, which rapidly absorbs the heat that is given off during the solidification process of monocrystalline, then the heat is conducted by the recycled water of the furnace, thus the temperature gradient is increased and coagulation rate and quality are improved.Reflectivity and absorption experiments have been carried out for the selected materials to find out the ingredient recipes of the coatings relative with high reflectivity and large absorptivity.By means of orthogonal experimental design, analyzing the effect of reflective coatings with different proportions of filler on its reflectance according to experiments, the effects order of factors has been obtained: hollow bead has the max influence, followed by the ZrO2, TiO2 and Cr2O3. Based on this formulations, the addition of each filler were changed in the experiments and the best formula is Al2O3 50g, ZnO 30g, SiO2 20g, hollow beads 30g, ZrO2 12g, TiO2 7g and Cr2O3 11g, the reflection rate is 92%.Again through orthogonal experimental design method, based on the ingredient recipes of the absorptive coating, the infrared absorption experiments of the coating have been carried out under sintering at different temperatures, time and additives content so as to seek out that the optimal sintering process is 1280℃×2h and the amount of additives is 25g. Ultimately the final best formula of absorptive coating is SiC50g, Fe3O435g, nano-graphite powder 15g, additives 25g. When coating thickness is 300μm, the absorptivity is 89.9%.On the basis of the above experiments, further tests have been carried out to verify the effects of reflective and absorptive coatings on the high temperature Experimental results showed that: when the temperature ranging from 400℃to 800℃, the difference temperature of cylinder with reflective coating between the internal and the outer is 270280℃, and the inner temperature is 6080℃higher than the one without such coating. The difference temperature between the internal and the outer of the no coating cylinder is 8595℃.The internal temperature of the cylinder with absorptive coating is 1520℃lower than the one without such coating while the outer temperature of the former is 1520℃higher than the latter one.Thermal efficiency of the thermal field in single crystal growth furnace has been calculated with the heat transfering theory, and the results show that: amount of radiation heat transfer with a coating reflecting the infrared radiation is 32875W/m less than the one uncoated.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. The Design and Experimental Rearch of Disposable Catalyzer in the Process of Coal Liquefaction,TQ529.1
  3. Fabrication and Characterization of Al-based Metallic Glass Thin Films,TG139.8
  4. Analysis on Structure and Performance of Q-Modulated DFB Laser,TN248
  5. Butyl rubber absorbing properties of boron carbide composites research,TB332
  6. Study on Doppler Radar Data Direct Assimilation,P456.7
  7. Study on the Application of GPS Observation to WRF,P413
  8. The Build of the Dynamic Milling Force Model Based on Cutting Graphics,TG54
  9. Influence of Surface Texture on Tribological Property of Piston Ring/Cylinder Tribopair,TH117.1
  10. Research on Radiation Balance and Environment Energy of the Upper Canopy Space in Chinese Fir Forest,S791.27
  11. High-frequency Magnetic and Microwave Absorption Properties of FeCuNbSiB Planar Anisotropy Paticles Composites,O469
  12. Study on Dielectric Function and Absorbing Properties of Nanometer Metal Films,TB383.1
  13. Reflection and Transmission of Extraordinary Beam at Crystal Surfaces,O734
  14. The Reflection and Transmissivity of Extraordinary Beam at Crystal Surfaces,O734
  15. Research on the Mechanism of Laser Interaction with 30CrMnSiA Steel and Other Typical Metals,TN249
  16. Solid Photoacoustic Spectrum Detection Based on Piezoelectric Technique,TN247
  17. Study on Analytical Method of Tributyltin and Triphenyltin in Food,TS207.3
  18. Preparation, Microstructure and Photoelectrical Properties of Ag/ITO/Ag Multilayer Films,TB383.2
  19. Research on Tool Wear in Ultrasonic Vibration Cutting of High Manganese Steel,TG51
  20. Research on Cutting Force in Ultrasonic Vibration Turning of High Manganese Steel,TG51
  21. Model Study on Winter Wheat Vegetation Reflection Character and Leaf Area Index Based on High Spectrum Remote Sensing,TP79

CLC: > Industrial Technology > Chemical Industry > Paint Industry > General issues > Coating products
© 2012 www.DissertationTopic.Net  Mobile