Dissertation > Excellent graduate degree dissertation topics show

La 0.5 Sr 0.5 Preparation and Characterization MnO 3 perovskite -type oxides

Author: ZhouTianYi
Tutor: GuYingYing
School: Central South University
Course: Inorganic Chemistry
Keywords: Perovskite Coprecipitation Method PEG-4000
CLC: O611.4
Type: Master's thesis
Year: 2011
Downloads: 131
Quote: 0
Read: Download Dissertation

Abstract


Perovskite mixed oxides have been raised world-wide concern because of their remarkable ability in the treatment of exhaust. This paper is mainly engaged in two ways to synthesize La0.5Sr0.5MnO3, namely hydrothermal method and co-precipitation method in order to find out which is the appropriate way to prepare the target product. Meanwhile, surfactant PEG-4000 has been adopted to optimize the physical and chemical capabilities of the product. XRD, TG, SEM, BET and H2-TPR have been used for the characterization of the product.The effects of different hydrothermal temperature and calcination conditions on the phase formation of the product prepared by hydrothermal method have been studied. XRD shows that, no single-phased perovskite structured mixed oxides Lao.5Sro.5Mn03 can be obtained through hydrothermal method regardless of the change of experiment conditions. It can be concluded that hydrothermal method is not the appropriate way to synthesize La0.5Sr0.5MnO3.The effects of calcination temperature as well as calcination time on the phase formation of the product prepared by co-precipitation method have also been discussed. The calcination temperature has been identified with XRD and TG analysis. pH value for co-precipitation has been found by calculation as well as experiment. The optimal experimental conditions are:Co-precipitaiton pH:10; calcination temperature:850℃, calcination time:4h. With the increase of the temperature, the specific surface area has been reduced. And the specific surface area of product with single phase has reached by 6.86 m2·g-1.In order to study the effects of PEG-4000 on the physical and chemical capabilities of La0.5Sr0.5MnO3, a series of experiments have been designed. XRD results show that all the products obtained are single-phase and the amount of the dispersant has no effect on the phase formation. BET results show that PEG-4000 plays an important role in the specific surface area and the catalytic capabilities of the product. The appropriate amount of the dispersant can be beneficial for the specific surface area of the product, and remarkably improve its oxidizing capability. SEM results show that PEG-4000 is able to alleviate the agglomeration of the particles and reduce the effects of temperature on the particle agglomeration. H2-TPR show that, the product prepared with PEG-4000 has better oxidizing capability under low temperature and a higher structural stability under high temperature.

Related Dissertations

  1. Preparation and Photocatalytic Properties of Semiconductor Oxides,O643.36
  2. Synthesis, Conducting Properties and Application of Bax Ce0.8Y0.2O3-α + yZnO,TQ174.1
  3. (Class ) perovskite -type oxides catalytic elimination of N 2 O,X701
  4. The Numerical Simulation and Experimental Study on Diesel Engine NOx and PM Exhaust Emissions Reduction by Catalytic Method,TK421.5
  5. Study of La-Y-Co Composite Oxides for Reduction of Sulfur Dioxide by Monoxide Carbon to Elemental Sulfur in the Presence of Oxygen,X701.3
  6. Soot and NOx purification catalyst surface simultaneously mechanism of action of reactive oxygen species,X701
  7. Research Catalyst and Its air battery performance - Zinc,TM911.41
  8. Study of Catalytic Properties of La0.7Y0.3CoO3 Reducting SO2 to Element Sulfur by CO in the Presence of Oxygen,X701.3
  9. The Synthesis and Biological Evaluation of Dendrimer-based Tumor Targeted MRI Contrast Agent,TQ421.7
  10. Synthesis and Characterization of Tio2 -based Nanostructures,TB383.1
  11. Perovskite catalysts in diesel exhaust Purification,X701
  12. Characterization and Analysis of Microstructure for Complex Perovskite Microwave Dielectric Ceramics,TM28
  13. Preparation and Properties of MnOx, LaMnO3 and LaVO4 Catalysts for Catalytic Oxidation of Chlorobenzene,O643.36
  14. Study on the Upconversion Luminescence of Rare-earth Doped NaNbO3 and Sr2TiSi2O8,O482.31
  15. Preparation of La1-XCeXMnO3 Nano-powder and the Catalytic Activity for CNG Vehicle Exhaust Removal,O643.36
  16. The Properties of Superconductor, Reconstruction and Surface Alloy of Semiconductor Surface,TN304.01
  17. Sodium bismuth titanate based lead-free piezoelectric ceramics Preparation and Properties,TM282
  18. Optimization and Application of Interatomic Potential Parameters for Perovskite Ferroelectrics,TM223
  19. The Oxidation Activity Studies of Low Temperature Combustion for Diesel Soot,X734.2
  20. Research on Perovskite-type Filter for Purification of Diesel Exhaust Particulate,X734.2
  21. Preparation and Hydrogen Permeation of Nd Doped BaCeO3 Membranes,TQ174.1

CLC: > Mathematical sciences and chemical > Chemistry > Inorganic Chemistry > Chemical elements and inorganic compounds > Inorganic synthetic chemistry
© 2012 www.DissertationTopic.Net  Mobile