Dissertation > Excellent graduate degree dissertation topics show

Study on the Welding Material and the Microstructure and Properties of the Welded Joint in 9Ni Steel

Author: MengGenBaGen
Tutor: LinWenGuang
School: Inner Mongolia University of Technology
Course: Materials Processing Engineering
Keywords: 9Ni steel welding material process of welding microstructure low temperature impact toughness
CLC: TG407
Type: Master's thesis
Year: 2009
Downloads: 373
Quote: 1
Read: Download Dissertation

Abstract


The technology of welding of 9Ni steel was still mastered by minority developed countries and the manufacturing technology and market was controlled by minority Transnational Corporation for welding materials of kitting nickel, which will lead to depend on foreign country in design and manufacture of LNG tanks with period long, cost high, application and extension of Domestic 9Ni steel disadvantageous. So it is very important for domestic 9Ni steel to develop its kitting welding materials and technology.In the paper submerged arc welding wire of 9Ni steel was studied. Deposited metal gainned possessed high strength (yield strength Rp0.2≥450MPa),tensile strength Rm≥720MPa) and excellent low-temperatrue toughness, satisfying deposeited metal of 9Ni steel to requirement of strength and toughness. Applied optical microstructure and SEM and so on to study microstructure of deposited metal and fractographs, the results showed that microstructure was consisted ofγtype solid solution and precipitation phase, fracture of deposited metal had two area: fibrous zone and shear lip. Type of fracture belonged to fracture of toughness.The three method of welding—tungsten inert gas arc welding (TIG) and shielded metal arc welding (SMAW) submerged arc welding (SAW) and foreign welding materials was applied to 9Ni steel and microstructure and porperties of joint was studied to analyse domestic of weldability of 9Ni steel. The result showed that weldability was excellent to 9Ni steel, three usability of weldingcan adapt to requirement of welding. Applying TIG to 9Ni steel crosswise tentile strength of welding joint was 745Mpa and situation of crack was base metal, which strength of weld bead above base metal. Center of weld bead, fusion-line and 3mm outside of fusion-line was measured in low temperature test, value of center of weld bead was minimum and average value was only 62J, but this value can satisfy the requriement of British system BS7777 to Akv/J(-196℃)of LNG tank weld joint >35J. Compared to TIG, low temperature impact toughness of weld bead in SMAW decreased to 50J with remained minimum. Three heat input was applied in SAW. With the increase of the heat input, tensile strength of welding joint incersed then decresed, while low temperature impact incresed. Under the one heat input, impact toughness of base metal was maximum, HAZ above meat bead. The results can be used as theoretic basis for making welding procedure of 9Ni steel.

Related Dissertations

  1. Reactive Hot-Pressing and Mechanical Properties of （ZrB2-ZrO2）/BN Composites,TB332
  2. Microstructure and Mechanical Properties of Mg-Zn-Y-Zr Alloys,TG146.22
  3. Investigation on Microstructure and Properties of Cadmium-Free Silver-Based Intermediate Temperature Filler Metals,TG425.2
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. The Investigations on the Characteristics and Mechanism of NIR Emission from Bi-doped Silicophosphate Glasses,TQ171.1
  6. Preliminary Study on Salt-Tolerant Mechanism of the New Pennisetum Purpereum Schumach Variety-Sumu No.2,S543.9
  7. Study on the Fine Structure of Intestine and Intestinal Mucosal Barrier in Zebrfish (Brachydanio Rerio),Q95-33
  8. Study on Characteristics of Morphology Anatomy and Physio-Biochemistry of Two Ecotype Varieties Cucumber Leggy Seedilings,S642.2
  9. Study on the Mechanism of Heat-Induced Gelation of Myofibrillar Proteins,TS251.1
  10. Studies on the Aggregation and Microstructure of Imidazolium Ionic Liquids in Solutions,O645.1
  11. Chinese word for international education research based lexicography,H164
  12. The Effect of Tungsten on Microstructures and Properties of Wear Resistant Overlays Prepared by Plasma Cladding,TG174.4
  13. Study on the Structure and Electrical Properties of the Doping NiCo0.2Mn1.8O4 Spinel Type,O614.81
  14. Research and Development of Spidroin/Poly-L-lactic Acid Composite Nanofiber,R318.08
  15. Studies of Luminescence Characteristics of Eu3+-doped Rare Earth Borates REBaB9O16 （RE=rare Earth Ions and Y）,O627.3
  16. The Research on Extrusion Parameters Through the Plate Billet of Magnesium Alloy,TG379
  17. Study of the Polymer Synthetic Paper Formula and Papyraceous Performance,TS71
  18. Study on Microstructure and Superconducting Properties of MgB2 Wires Fabricated by Two-Step PIT,TM26
  19. Study on Morphological Evolution and Toughening Mechanism of Sandbag Microstructure-toughened PA6/EPDM-M/nano-CaCO3 Ternary Composites,TB33
  20. The Photoluminescence of H1.77 [Sr0.8 Bi0.21Ta2 O7] Nano-layers Annealing under Different Temperatures and the Effect of the Cu2O Addition on Its Photocatalytic Activity,O482.31
  21. Compressive Strengthes and Microstructural Characteristics of Fiber Reinforced Geopolymer,TB321

CLC: > Industrial Technology > Metallurgy and Metal Craft > Welding, metal cutting and metal bonding > Welding general issues > Mechanical properties of welded joints and Intensity
© 2012 www.DissertationTopic.Net  Mobile