Dissertation > Excellent graduate degree dissertation topics show

Study on Fault Diagnosis of Converter in Double-fed Wind Generator System Based on Wavelet Neural Network

Author: ZhangLiang
Tutor: DuanQiChang
School: Chongqing University
Course: Control Science and Engineering
Keywords: Doubly-fed wind power generation system Converter Faults diagnosis Wavelet neural network Algorithm optimization
CLC: TM46
Type: Master's thesis
Year: 2011
Downloads: 216
Quote: 2
Read: Download Dissertation

Abstract


Under the circumstance of energy crisis and protection of ecological environment, the status of renewable energy has become increasingly important. Wind power is one of the renewable energy members, which plays an important role. Converter is one of the main components of double-fed wind power generation system, but it has relatively poor stability. Therefore, condition monitoring and fault diagnosis of the converter is essential for improving the system stability.At first, the paper discusses mathematical model of the Double-fed wind power generation system, then studies the effects of open-switch faults on wind power system and new open-switch fault diagnosis methods on power converter with problems. Modeling process focuses on the control strategy of the rotor side. By using Matlab/Simulink, establishes a double-fed wind power generation simulation platform.Subsequently, the paper describes the wavelet neural network theory and construction methods as well as introduces several commonly used algorithms in wavelet neural network. In the process of discrete wavelet neural network training, figures out that the traditional recursive least squares algorithm (RLS) with problems like easy to fall into local minimum or slow convergence, which decreases its training efficiency. Therefore, based on the recursive least squares algorithm, this paper make some improvements in proposing variable learning rate and variable weighted recursive least squares algorithm and introduces the algorithm into discrete wavelet neural network training. Comparative experiments show that accuracy and rate of convergence variable learning rate and variable weighted RLS algorithm is superior to the traditional RLS algorithm.Finally, variable learning rate and variable weighted RLS algorithm is applied to training wavelet neural network (WNN) to detecting the open-circuit fault of converter, and then this paper describe the specific steps of converter fault diagnosis. Final experimental results prove that the discrete wavelet neural network(DWNN), which use variable learning rate variable weighted recursive least squares algorithm can accurately identify the type of fault.

Related Dissertations

  1. The Equivalent Circuit Model of Radial Vibration Mode Piezoelectric Transformer and Its Application,TM406
  2. Grid-Side Converter Control and Wind Turbine Emulator in Direct Drive Wind Power System,TM46
  3. Research on Power Supply of Contactless Power Transfer System,TM46
  4. Research on π Type AC/AC Converter with Variable Structure Control Strategy,TM46
  5. The Research of Wind Power Generation System Based on DFIG,TM614
  6. Research on the Passivity-Based Control of Active Clamp Forward Converter with Integrated-magnetics,TM46
  7. Research on Intrinsic Safety Characteristics of Single-ended Forward Converter,TM46
  8. Explicit Model Predictive Control in Power Electronics and Power Systems,TM76
  9. Reliability Allocation and Applied Research of Software System Based on Genetic Harmony Algorithm,TP311.53
  10. Improvement of Planar Passive Integration Structure for LLC Resonant Converter,TM46
  11. Microwave frequency with the LLC resonant soft-switching power,TM925.54
  12. Research on Control of Direct Driving Type WTG Grid Converter Based on DSP,TM46
  13. Research on Sensorless Vector Control System of Induction Motor for High-Power Cell-Cascaded Inverter,TM921.51
  14. Research on the 24V DC Converter of the Self-power System,TM46
  15. Research on Digital Phase-shifting Three-phase Dual Active Bridge Bidirectional DC/DC Converter,TM46
  16. Study of LED Driver with Multiple Led-channels and Intelligent Lighting Technology,TM46
  17. Research on Automatic Current and Voltage Sharing of High Frequency Combined DC-DC Converters,TM464
  18. Design of 10kW Electric Vehicle Charging Stations’ Power Supply,TM46
  19. The wide input high gain Isolated DC-DC converter,TM46
  20. Research on Bidirectional DC/DC Converter with Ultracapacitor,TM46
  21. Design of a Type of High Step-up DC/DC Converter,TM46

CLC: > Industrial Technology > Electrotechnical > Transformers, converters and reactors > Converter
© 2012 www.DissertationTopic.Net  Mobile