Dissertation > Excellent graduate degree dissertation topics show

The Finite Element Analysis about Direct Driving Magnet Wind Turbine of Hub and Fastening Bolt

Author: LeiZengHong
Tutor: HeYuLin
School: Chongqing University
Course: Mechanical Engineering
Keywords: Wind turbine hub bolts FEM
CLC: TM315
Type: Master's thesis
Year: 2011
Downloads: 189
Quote: 1
Read: Download Dissertation

Abstract


The hub of wind turbine is one part of wind wheel,which connects the blades and axis(stator) by bolts.All the loads coming from the blades transmit to the transmission system through the hub,then to the generator.So the structural strength and fatigue strength of hub and bolts concern the reliability and safety of the wind turbine.The paper analyzes the static strength and fatigue life of hub of the one MW horizontal axis permanent magnet direct drive wind turbine under ultimate load cases by the finite element method,and analyzes the contact strength and fatigue life of the bolts under preload case and other ultimate load cases.It summarizes the analysis methods for the strength of hub and bolts based on the GL specification. The main research content is as follows:①It’s obtained the ultimate loads of the blade root and hub center by the software Bladed,which is through the analysis of horizontal axis permanent magnet direct drive wind turbine according to the theory of blade momentum.②The study of the strength analysis of hub: the geometric modeling of hub,the meshing for the model,exerting the boundary conditions and loads.The main point is to compare the method for setting the boundary conditions and exerting the loads,which can obtain one method approaching the practice.③Analyzing the 20 years fatigue life of hub and studying the influencing factors.④Analyzing the contact strength of bolts connecting hub and blades,illuminating the importance of bolts in hub connecting and the proload of bolts contributing more for hub stress.⑤Analyzing the fatigue of bolts with noted fatigue software MSC.Fatigue and Bladed,verificating the requirements of bolts.

Related Dissertations

  1. Analysis of Flexspline Stress and Tooth Wear in Harmonic Gear Drive,TH132.43
  2. Grid-Side Converter Control and Wind Turbine Emulator in Direct Drive Wind Power System,TM46
  3. The Effect of Current Density and Electric Field on Ni and Its Alloy Electrodeposition for Copper Crystallizer,TQ153.2
  4. Marine Boiler Superheater Tubes Expansion Port Stress and Strain Analysis,TQ051.5
  5. Finite Element Analysis and Optimization Design of a Tractor Cab,S219.02
  6. Steering Mechanism and Hydraulic System for the Electronic Control Hydraulic Power Steering System of Tractor,S219.02
  7. TWIN BLOCK appliance reconstruction when combined in different stomatognathic muscles and ligaments associated constraint force of impact,R783.5
  8. Undersea robot plow trenching machine design and analysis,TE952
  9. Graph-based similarity search scientific literature key technology research,TP391.3
  10. The Study on Site Selection Methods about Bus Transfer Hub at Cross-Harbor Tunnel in Qingdao,U491.17
  11. Study on Shear Bearing Capacity of HRBF500-Reinforced Concrete Beams,TU375.1
  12. Research of H-beam Steel after Ultra Fast Cooling,TG335.4
  13. Sensor-less Direct Torque Control of Doubly Fed Induction Wind Generator,TM315
  14. Variational Theory for Coupling and Numerical Computing in Rolling Process,TG331
  15. Study on the Modification of Basalt Fiber Composites Used for Wind Turbine Blades,TB332
  16. Study and Application of FEM Model for Plate Controlled Cooling Process,TG335.5
  17. Study of Thrust Force and FEM Simulation in Drilling Process on Complex Helical Drill,TG52
  18. Study on Effect of Rotor Structures on Fan’s Performance and Internal Flow,TH43
  19. Electrical Impedance Tomography numerical solution of the problem in some studies,O441.4
  20. Research for the Impact on the Operation of a Normal Road and Railway by the Mining of Meng Jiagang Iron Mine,U211;U411
  21. Study on the Construction and Operation Management Model on the Integrated Supervisory Control System of Tianjin Railway Station Transport Hub Project,U115

CLC: > Industrial Technology > Electrotechnical > Motor > Generators, large the generator group ( Zonglun,) > Wind turbines
© 2012 www.DissertationTopic.Net  Mobile