Dissertation > Excellent graduate degree dissertation topics show

Simulation Research on Fault Line Detection for Non-Solid Grounded System Based on Integrated Method

Author: HeYinSheng
Tutor: ShangLiQun
School: Xi'an University of Science and Technology
Course: Proceedings of the
Keywords: Non-solid Grounded System Fault Line Detection MATLAB EMTP Fuzzy Theory Membership Function
CLC: TM862
Type: Master's thesis
Year: 2011
Downloads: 190
Quote: 0
Read: Download Dissertation

Abstract


Non-solid Grounded System is widely used in our country’s medium and low voltage distribution network, with the reasons that fault current is weak, the system can still keep symmetrical and continue to provide power to the load while single-phase grounding faults occur and some other reasons. In distribution networks, single-phase grounding fault is the most frequent in all faults. However, the fault detection of Non-solid Grounded System when single-phase grounding fault occurs has never been effectively solved because fault current is weak and fault arc is unstable. This paper aims solving the above problem.Firstly, basic principle of non-solid system and steady/transient fault characteristics after single-phase grounding are introduced. Secondly, simulation model of non-solid system is built in the software of MATLAB and EMTP. Thirdly, three kinds of simulation including metallic grounding, high-resistance grounding and arcing grounding are done in Neutral Ungrounded Power System and Neutral Resonant Grounded Power System, basing on the simulation model and the methods of utilizing steady /transient /injection fault information to detect fault. Last but not least, the application scope, advantages and limitations of different line detection methods are analyzed.In order to increase the accuracy of fault line detection and utilize the advantages of different detection methods, six methods including zero sequence fifth harmonic current method, energy function method, transient zero sequence reactive power direction method, signal injection method, zero sequence reactive power method, zero sequence active power method are integrated as the criterions based on simulation results. Basing on fuzzy theory, fault membership function of every line and weight membership function of every method are built. Then, one index which is used for fault line detection is generated according to the integration of fault membership function and weight membership function. At the end, digital simulation of fault line detection by integrated methods based on fuzzy theory is done and demonstrates its validity and reliability.

Related Dissertations

  1. Design of Reciprocatingwire Outfit of Mwedmand Research on It’s Control System,TG484
  2. Application Research of Digital Image Processing on Container Inspection,TP274.4
  3. S-lay Installation Analysis for Deepwater Pipeline,TE973
  4. The Research and Application of Software Reliability Test for User Right Management System,TP311.53
  5. Research and Application of Safety Assessment Method Based on Neural Network,X937
  6. The Design of Experimental Device for Mine Motor Soft Starter,TM343.2
  7. Research on Analytical Method to Calculate the over Voltage and Surge Impedance of Tower under Lightning,TM863
  8. Mining resources based on genetic algorithm optimization model of,O224
  9. SAR interferometric method for optimal selection,P225.2
  10. Design and Simulation on MDOF Robotic Prosthesis’s Shoulder,TP242
  11. The Simulation Technology Study of Marine Gas Turbine Based on Modular Modeling,U674.703
  12. Research on Fatigue Properties of Local 304 Steel and Its Welding Structure,TG457.11
  13. The Research of Level Set Methods and Their Applications in Video Vehicle Detection,TP391.41
  14. Based on the MATLAB Micro Earthquake Source Positioning of the Research and Implementation,P315.3;TD326
  15. Design and Realization of Signal Distortion Measurement System Based on Virtual Instruments,TP274
  16. Application of Fractal Interp Function to Resources Estimate of Lime Mine in Kaixian Country,P619.225
  17. Study on Optimization and Application of Road Transportation System of Surface Mine,TD57
  18. Research of Vibration Mechanism on the 2030 Continuous Annealing Unit’s Temper Mill,TG333
  19. Research cylinders detection system mold width,TF341.6
  20. The Basic Study on Semi-active Control of Damping Controlled to Serial Robot,TB535.1
  21. The Analysis of Motor Speed Control System and Control Strategy Study,TH137

CLC: > Industrial Technology > Electrotechnical > High Voltage Engineering > Overvoltage and Its Protection > Over-voltage protection devices
© 2012 www.DissertationTopic.Net  Mobile