Dissertation > Excellent graduate degree dissertation topics show

Analysis of Parasitic Parameters in the External Bypass Cabinet Based on PEEC Theory

Author: ZhongPeng
Tutor: ZhangBo；QiuDongYuan
School: South China University of Technology
Course: Power Electronics and Power Drives
Keywords: PEEC parasitic parameters external bypass cabinet current sharing
CLC: TL623
Type: Master's thesis
Year: 2011
Downloads: 67
Quote: 0
Read: Download Dissertation

Abstract


ITER external bypass cabinet is an important equipment that protect from over-current and over-voltage in the rectification power supply system. In the worst case, the maximum peak pulse current may reach about 300kA. So, it need parallel branch to share the current. During the operation of power electronic devices with parallel branch, because of the parasitic parameters in the external bypass cabinet, the current sharing of parallel branch would be far from the satisfaction, so the entire operation of equipment would have impact from overload devices. In order to increase the stability and reliability of the operation of the equipment parasitic parameters of the devices should be arranged in a reasonable range. And partial element equivalent circuit (PEEC) is an effective circuit modeling and parameter extraction method. This paper establishes relatively accurate circuit model of external bypass cabinet based on PEEC method, and proposes the improved measures in consideration of current sharing1)This paper gives the principle of partial element equivalent circuit and ideas for improvement. Modified nodal equation (MNA) which is to describe the system takes place of a specific equivalent circuit. Partial element equivalent circuit method is applied to the analysis of parasitic effect of single-layer PCB in the Matlab environment. And it shows the validation of the correctness of the numerical results with analytical method.2)Based on the original design, it gives the circuit modeling and the calculation of parasitic parameters of external bypass using PEEC method. After simulation and qualitative control experiments, the results have been verified.3)It proposed some improvements of external bypass cabinet considering of the current sharing, including adjustment of the distance between each branch, establishment of a symmetrical cylindrical external bypass cabinet, the use of series reactor and laminated power bus,.

Related Dissertations

  1. Physical Fields’ Characteristic Study & Structural Optimization of a SCR Denitrification Reactor,X773
  2. Research on Output Control and Parallel Operation Technology of UPS Inverters,TM464
  3. HEPA filter detection system optimization mixing device,TU831.4
  4. Nano technology parasitic parameters optimization of extraction,TN402
  5. Design And Realization of High-Power Hybrid Wind and Photovoltaic Generation Independent Power System,TM614
  6. The Design of 270W Fan Station Switching Power Supply,TN86
  7. Research on a New High Power Hybrid DC Contactor,TM572.1
  8. Optimization and Design of High-efficiency Charge Pump for Security SRAM,TN432
  9. Analysis of high power broadband class F power amplifier design and debugging strategies,TN722.75
  10. Extraction and Application about Modeling Parameters of Spiral Inductors on Silicon Substrate,TM55
  11. Research on the Line Current Distortion of Boost PFC Circuit,TM46
  12. A Novel Control Strategy for Input-Parallel Output-Series DC/DC Converter,TM461
  13. Research on Wide Input Voltage Range DC/DC Converter,TM461
  14. The Research on the Planar Integrated Magnetic Structure of the EMI Filter,TN713
  15. High Frequency Equivalent Circuit of Grounding Net,TM862
  16. The Design of 400kHz Compound Active-Clamp Boost PFC Converter,TM46
  17. Research on the Optimizing Design and Simulation of Planar Transformer Based on Integrated Software Platform,TM402
  18. RF ICs planar spiral inductors,TN492
  19. The Application of Heavy-current Silicon Rectifier Assembly in the Chlorine and Alkali Industry,TM461
  20. The Post Design of CPPLL,TN702

CLC: > Industrial Technology > Nuclear technology > Controlled thermonuclear reactions ( fusion reaction theory and experimental facilities) > Fusion engineering and technical > Power , energy storage
© 2012 www.DissertationTopic.Net  Mobile