Dissertation > Excellent graduate degree dissertation topics show

Numerical Simulation and Optimization of Cooling Jacket in the Gasoline Engine by CFD

Author: WangZuo
Tutor: ZhangLi
School: Chongqing University
Course: Vehicle Engineering
Keywords: Gasoline Engine Cooling Jacket CFD Three Dimensional Transient Simulations
CLC: TK414.2
Type: Master's thesis
Year: 2011
Downloads: 153
Quote: 0
Read: Download Dissertation

Abstract


With the increasingly stringent environmental regulations and non-renewable resource exhausting, the whole performance of the internal combustion engine should be improved. Many factors influence the engine’s performance, high temperature impact it a lot.The cooling performance is poor, vehicles will be used in high temperature condition, the main issue is engine overheat and lubrication performance degradation, which eventually led to the economic performance and power engine performance, reliability and durability worsening. So the engine cooling system research is of great significance. And one of the main cooling system design difficulties is cooling channel calculation design, and to conduct more accurate calculation must conduct 3d complex flow simulations and numerical simulation design is the most effective tool to realize this process.This paper is also applied for engineering, studying oil and gas flow mixing process of port-fuel-injected gasoline engine as the basic research, based on the two-phase flow basic principles, start numerical simulation of gas flow, Jet fuel and oil mixing in port to cylinder process.This paper introduces the basic process of the computational fluid dynamics (CFD) and its basic principle ,that is the theoretical basis of application calculation, when applied conservation equation and discrete method; Summarizes the process of establishing calculation mesh model and parameter calculation conditions. According to the actual requirements of the engineering project of development work, combined with computational fluid dynamics software AVL, two sets of different cylinder cushion structure optimization model for grid model was constructed, and done a lot of simulation calculation.Basic research contents were water jacket with engine cooling performance by the three-dimensional flow field simulation, numerical simulation results of 3d fluid are analyzed, and based on the analysis of the structure optimization scheme was put forward, finally the simulation results are compared, and summarized ideal optimized result.This article through numerical simulation analysis, by 3d model reveals plan of internal cooling engine water fluid flow distribution; Through the optimization of the structure, control key parts of the diesel exhaust temperature (such as the base and injector door between "bridge of the nose" area), get relatively uniform temperature distribution and reduce power loss and heat, so as to improve the reliability of the components and engine performance. And provide reference and basis for the cooling water flow field optimization design.

Related Dissertations

  1. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  2. Numeration Simulation of the Flow Field in a Slurry Pump,TH311
  3. Thermodynamics and Kinetics Study of the Effect of Alkali Metals on Homogenous Mercury Oxidation during Co-Combustion Coal with Biomass,TK16
  4. Numerical Simulation of Air-Fuel Mixture Formation in Gasoline Engine,TK411.2
  5. Numerical Simulation of cascade wake vortex changes,TK733.1
  6. The length of the blade Francis turbine research based on CFD,TK733.1
  7. Numerical Simulation and Experimental Research on Hump District of Francis Pump-turbine,TK733.1
  8. Study on Air Supply System and Air Distribution of Sleeping Berth Car,U270.383
  9. Power Steering Oil hydrodynamic characteristics and device research,U463.4
  10. Simulation Study of Heat Transfer Characteristic of Double Skin Facades,TU111.48
  11. Elevator guide shoe sliding friction system research and application,TU857
  12. Design and Simulation of Flue Gas Desulphurization Pump,X701.3
  13. Energy efficient stirrer numerical simulation and performance prediction,X703.3
  14. Research on Planing of Residential Thermal Environment and Micro Climate Design,TU119.4
  15. Study of nonlinear dynamic labyrinth seal gas,TH136
  16. Structure Strength Analysis of Impeller and Guide Vane Chamber of Mixed Flow Waterjet Pump,U664.3
  17. Numerical Simulation of the Particle Transport and Deposition in Human Tracheobronchial Airways,X513
  18. Aerodynamics Research on High-Speed Train Passing Through a Tunnel,U451.3
  19. Research on Aerodynamic Drag Reduction of High-speed Train with Non-smooth Surface,U270.1
  20. Fitted with a swing of Savonius wind turbine wind piece of static torque,TK83
  21. Adjustable thruster design and simulation of hydrodynamic performance,U664.33

CLC: > Industrial Technology > Energy and Power Engineering > Internal combustion engine > Gasoline > Structure > Cooling system
© 2012 www.DissertationTopic.Net  Mobile