Dissertation > Excellent graduate degree dissertation topics show

Study on the Asphalt Quick Heat Equipment

Author: LinOu
Tutor: YangRenFeng
School: Chang'an University
Course: Construction Machinery
Keywords: Rubber asphalt Heat transfer model CFD PLC control
CLC: U415.5
Type: Master's thesis
Year: 2011
Downloads: 20
Quote: 0
Read: Download Dissertation

Abstract


With the development of society , more and more cars a year will generate a lot of waste tires ; increasing traffic , increasing performance requirements on the use of asphalt pavement . If these waste tire rubber is cut into pieces , made ??of rubber asphalt mixture added to the asphalt , the asphalt road can significantly improve performance , and to solve the problem of waste tire processing . Production of rubber asphalt base asphalt heating temperature higher than ordinary asphalt mixes and SBS modified asphalt mix asphalt heating temperature project for asphalt heating equipment can not be in a short time the asphalt heated to process requirements temperature and energy consumption , fuel utilization is low, leading to an extension of time and huge economic losses . Furthermore , the rubber asphalt production equipment is no uniform standard , can not guarantee the quality of the rubber asphalt products . In view of the above reasons , the article compares the advantages and disadvantages of the different asphalt heating method , pointed out that currently works in the asphalt heating equipment can not be achieved through research and analysis , Asphalt rapid warming , due to the use of natural convection , overall , static heating asphalt . For this , we propose the use of thermal oil as the heat transfer medium , using forced convection , partial, the dynamic heating asphalt thought , designed spiral heat asphalt heating equipment , a heat transfer model deduced . Then using CFD software FLUENT to simulate the heat transfer process of the spiral heat asphalt heating equipment . The results show that the spiral plate asphalt heating equipment can be realized asphalt uniform, fast heating purposes . Simultaneous analysis of the fluid flow rate , flow patterns and the channel width of the asphalt heating equipment, spiral plate heat transfer effect . Finally , rubber asphalt production process , Siemens S7-200 PLC as controller using series Siemens PLC the programming software STEP7-Micro/WIN4.0 write of rubber asphalt automatic production control system program .

Related Dissertations

  1. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  2. Physically Based Real-Time Fluid Simulation Technique,TP391.41
  3. Digital Simulation of Temperature in Modern Greenhouse,S625.51
  4. Study on the Characteristics and Simulation of the Hydrocyclone Reparation Process for Initial Rainwater,X522
  5. Gantry planer simulation equipment design,TG551.2
  6. Based on Pro/E Reconstruct Sprinkler Structure and Investigations on Internal Flow Characteristic of the Sprinkler by Numerical Simulation and Experiment Methods,TP391.72
  7. The Design of Automatic Control System of Experimental Stereo Garage,U491.71
  8. Research on the Mechanism of Discharge of Transmission Line in Sand-dust Storm,TM851
  9. Theoretical Study and Simulation of Hydrocyclone Separator,TH237.5
  10. The Design of Telescopic Asphalt Spraying System,U415.524
  11. Numerical Simulation Study on the Process of Electrospinning and Experimental Verification,TQ340.6
  12. Pilot Plant Experiments and CFD Simulations on an Oxyfuel Burner,TK223.23
  13. Simulation of the Crane’s Hydrodynamic Coefficients Based on CFD,U674.35
  14. Simulation Study of Thermal Comfort in Station Waiting Hall with Different Air Supply Method,TU831
  15. CFD Simulation Study on Environmental Control System of a Subway Station Platform in Wuhan,TU831.8
  16. Numerical Modeling and Design of a Multi-bladed Savonius Vertical Axis Wind Turbine,TK83
  17. Study of metal -organic chemical vapor deposition equipment control system,TN304.055
  18. Shielded motor pump on the main characteristics of radial bearings,TH133.3
  19. Injector Selection and Matching Technology for Advanced GDI Engines,TK413.84
  20. Numerical Study on Green Water and Bow Flare Effect for Ship Advancing in Waves,U662
  21. Heat transfer model based on the energy efficiency of central air conditioning system integrated optimization,TU831.3

CLC: > Transportation > Road transport > Road works > Road construction > Construction machinery and equipment
© 2012 www.DissertationTopic.Net  Mobile