Dissertation > Excellent graduate degree dissertation topics show

The Process Experimental Study on Magneto-rheological Finishing for Optical Glass

Author: ChenYue
Tutor: YinShaoHui
School: Hunan University
Course: Mechanical Manufacturing and Automation
Keywords: Magneto-rheological finishing Magneto-rheological fluild Polishing device Parameter optimization
CLC: TG669
Type: Master's thesis
Year: 2009
Downloads: 381
Quote: 5
Read: Download Dissertation

Abstract


It is a trend of using small diameter aspherical lens in the modern optical system to improve the optical properties. The processing efficiency and processing precision of traditional polishing methods to small-diameter aspheric optical are difficult to meet industry requirements. the bottle necks of polishing technology to small-diameter aspherical lens and components is how to polishing the workpice with high efficiency and precision, so it is urgent to develop a new type of advanced polishing method with highly efficient and high-qualityMagneto-rheological Finishing Technology (MRF) is a new type of optical processing technology developed in recent years to obtain super-smooth surface without damage. Most conventional magnetorheological finishing used polishing wheel, it is difficult to polish samll size concave lens less than 10mm.This research is from the national 863 subject—development of ultra-precision aspherical machine tools.In order to solve the polishing problems in conventional magneto-rheological finishing, the researchs are carried out as following:(1)A new samll polishing pad is designed to polish samll concave. MRF polishing experimental apparatus including magnetic field generator, polishing head and fixture.(2)By analyzing the magneto-rheological fluid composition, properties, rheological mechanism and performance requirements, optimize the magneto-rheological polishing fluid composition and develop a qualified liquid for magneto-rheological finishing. The influences of various components on polishing are analyzed.(3)Using the magnetorheological finishing experimental apparatus and the developed magneto-rheological fluids,the influence of polishing tool’s shapes on surface roughness is investigated in such factors as magnetic intensity, working gap, rotational speed of magnetic pole and polishing time. Optimize polishing parameters by orthogonal test analysis of different processing parameters on the extent of the effect of polishing. And then discuss the removal mechanism of glass and polished using metallographic photos of the results are analyzed.(4)The simulation of the magnetic field distribution has been carried out for polishing tools, the influence on surface morphology of magnetic field strength and speed is analyzed at the same time. Establish magnetic field strength and speed of the relationship with the mathematical model.

Related Dissertations

  1. Hot air drying characteristics of lettuce osmotic dehydration mass transfer kinetics and permeability,TS255.52
  2. Analysis and Optimization of Cutting Parameters on Machining of Straddle Screw Holes between the Locking Blade and Rotor,TG52
  3. Research on the Total Error Analysis and Calibration of a Parallel 6-DOF Earthquake Simulator,P315.8
  4. Study and Application on the Techniques of High-Efficiency Magnetorheological Finishing,TG175
  5. Research on the Relation between Every Parameters and Cutting Power and Surface Quality in the Machining of Dies,TG547
  6. Development of Rolling and Heat Treatment Process of 9Ni Steel,TG161
  7. Theoretical Studies and Experimental Analysis on High-rise Isolated Building Structure,TU973.31
  8. Energy-Based Passive Control Parameters Optimization of Segmented Isolation System for High-Rise Building,TU973.31
  9. The Optimization Design of the Mixing System in Dry Mortar Mixer and the Finite Element Analysis,TU578.1
  10. Simulation Study and Parameter Optimization for Particle Impacting Rock,TE242
  11. Simulation and Parameter Optimization of High-Speed Milling of 6005A Aluminum Alloy Carbody Structural Part,TG54
  12. Experimental Research on Cutting Force and Tool Wear of GH4169,TG506
  13. Design and Implementation of Word and Speech Libraries and NHMM Algorithm in Chinese Speech-to-Text Conversion,TN912.3
  14. Cognitive radio based multi-node cooperative spectrum detection,TN925
  15. Design and Motion Simulation of Power Elevator,TP391.9
  16. The GA in the DNA Computing of the Research and Application,TP18
  17. The Study of Iterative Learning Control Based on dSPACE,TP13
  18. The Research of Shuffled Frog Leaping Algorithm Based on Local Orthogonal Crossover Operator and Its Application,S126
  19. Parameter Optimization and Structure Design of 4U-1400FD Potato Combine Harvester Digging Device,S225.71
  20. Underground runoff modulus France Parameter Optimization,U453.61
  21. Study on Parameter Marching and Control Strategy for Parallel Hybrid Electric Vehicle,U469.72

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal cutting and machine tools > Special machine tools and processing > Other special processing equipment and its processing
© 2012 www.DissertationTopic.Net  Mobile