Dissertation > Excellent graduate degree dissertation topics show

Preparetion and Characterization of Polyacrylate/nano-SiO2 Coating

Author: HuoLiXia
Tutor: GuoJinShan
School: Lanzhou University
Course: Polymer Chemistry and Physics
Keywords: nano-silica/polyacrylate resin in-situ polymerization polyacrylate /amino resin coating polyacrylate/polyurethane coating construction property mechanical property
CLC: TQ630.7
Type: Master's thesis
Year: 2009
Downloads: 450
Quote: 2
Read: Download Dissertation

Abstract


Nano-coatings have many excellent properties that other materials can not replace. Because high surface energy and hydrophilic properties of nano-SiO2 the application in nano-coatings is restricted.In this article,description relating to the history of development of nanomaterials was viewed.It also be summarized that about preparation methods and characteristics. Then the properties of nano-SiO2,methods of modified nano-SiO2 and application of nano-SiO2 were discussed.The surface of the nano-SiO2 was modified withγ-glycidoxypropyltrimethoxy -silane.Then polyacrylate/nano-SiO2 composite resins were prepared via in situ polymerization or blending method.Hydroxyl value,acid value and solid content of the composite resins were determined.The turbidity and viscosity of the two kinds of the composite resins were acquired by turbidimeter and rotational viscometer.The composite resins obtained from in situ polymerization were investigated by Fourier-transform infrared spectroscopy（FTIR） and Differential scanning calorimetry （DSC）.FTIR analysis showed that in situ polymerization provoked grafting reactions between polyacrylate molecules and nano-SiO2 particles.DSC data showed that nano-SiO2 particles into polyacrylate resin enhanced glass temperature.The resins separated from the composite were investigated by High performance gel permeation chromatography（HPGPC）.Baking varnishes were prepared with polyacrylate/nano-SiO2 composite resin and amino resin.Sagging resistant of the baking varnish,the hardness and abrasion resistant of the film were improved and leveling properties,gloss,adhesion and flexibility get worse with the increase of the content of nano-SiO2.The appropriate amount of nano-SiO2 can improve the impact strength and solvent resistance.Baking varnish obtained from In situ polymerization improved sagging resistant,the hardness and abrasion resistant more intensively.Then two-component polyurethane coatings were prepared with polyacrylate/nano-SiO2 composite resin and polyisocyanates resin.The mechanical properties and gloss of this coating were investigated.The results showed the hardness and abrasion resistant of the film were improved and leveling properties, gloss and flexibility get worse with the increase of the content of nano-SiO2.The appropriate amount of nano-SiO2 can improve adhesion and solvent resistance.The method of In situ polymerization improved sagging resistant,the hardness and abrasion resistant more intensively than the method of blend.

Related Dissertations

  1. Polyaniline / short fiber reinforced natural rubber properties,TQ330.1
  2. Synthetize and Characteristic Carbon Nanotube/Poly Liquid Crystal Composites,TB383.1
  3. Influence of Deformation and Heat Treatment on Microstructure and Mechanical Properties of Magnesium Alloy AZ91D,TG166.4
  4. The Study of Multi-walled Carbon Nanotube/polymer Damping Materials,TB535.1
  5. Studies on Blending and Foming Properties of CM/EPDM Blend,TB332
  6. Carbon fiber / fluorinated polymer composites research,TB332
  7. Preparation and Properties of Waterborne Polyurethane/Nano-ZnO Composites,TB383.1
  8. Preparation and Characterization of HA/PEEK Composities Via in Situ Polymerization,TB332
  9. Synthesis and Property of Semiconductor Nanomaterial and Composite Nanomaterial,TB383.1
  10. Study on Preparation of Plastisized PLA/OMMT Nanocomposites with Peg by Insitu Polymerization under Microwave Irradiation,TB383.1
  11. Effect of Flexible Die on Transmission of Pressure to Composite Integrated Structure,TB332
  12. Study on Surface Modification of Microcapsules in Self-Healing Polymer-Based Composites,TB383.1
  13. Subcritical quenching on microstructure and properties of steels 60Si2Mn,TG156.3
  14. Aging Behavior and Grains Refining of 3J33 Maraging Steel,TG142.24
  15. Effect of Heat Treatment on the Microstructure and Mechanical Properties of Ti-43Al-9V-Y Alloy,TG166.5
  16. Microstructure and Mechanical Properties of Ti-43Al-9V-Y Alloy,TG146.23
  17. Continuous Box Girder Bridge Reinforcement Technology,U445.72
  18. Preparation and Characterazation of Micro-capsules Containing Organic Peroxide Initiator with High Storage Stability,O621.2
  19. Study on Properties of Carbon Black/Polyolefin Conduction Composites,TB332
  20. Preparation of PA6/Nano-Magnesium Hydroxide Composite by in Situ Polymerization,TB33
  21. Preparation and Electrical Conductivity of Graphene Oxide/Polyamide 6 Nanocomposites,TB383.1

CLC: > Industrial Technology > Chemical Industry > Paint Industry > General issues > Coating products
© 2012 www.DissertationTopic.Net  Mobile