Dissertation > Excellent graduate degree dissertation topics show

PN phase modulation sawtooth chirp composite fuze signal processing technology

Author: YingTao
Tutor: ZhaoHuiChang
School: Nanjing University of Technology and Engineering
Course: Mechanical and Electronic Engineering
Keywords: pseudorandom code phase modulation saw-tooth wave linear frequency modulation complex modulation digital correlation fuse FPGA
CLC: TJ430
Type: Master's thesis
Year: 2009
Downloads: 179
Quote: 0
Read: Download Dissertation

Abstract


Because weapons become more faster and the complex electromagnetism environment in the future war. modern fuse have to possess strong anti-jamming capability and the ability of accurate distance-determination, identify the target when in the condition of big Doppler signal. It is the direction by using complex modulations in fuse.In this thesis, the operating principle of complex modulation fuse was discussed in detail. Then the process of modulation, demodulation and signal processing was simulated in Matlab. We can effectively weaken the impact of Doppler signal on PN correlation by selecting the appropriate parameters. Through spectral analysis of complex modulation fuse, the ability of anti-jamming was discussed in this thesis. Compared to the single modulation fuse, the complex modulation fuse has excellent ability in anti-jamming. While discussing the complex modulation fuse, the beat frequency of saw-tooth wave linear frequency modulation and the sensitivity of Doppler signal in PN code phase modulation were discussed and simulated by Matlab. In this thesis. PN signal was acquired through signal processing. The PN signal was used to correlate with another pseudorandom code, through this to determinate the distance. In addition, the digital correlation based on the software of Xilinx and the hardware of XC2S100E-6-TQ144 FPGA is designed. Then under different distances, the digital correlation was carried out by means of Modelsim. The demand to output high level when at particular distance was achieved; meanwhile, some experiences in the process of designing and implementing hardware which is based on FPGA are summarized. At last, the design and simulation of low pass filter, small signal magnify, Hysteresis Comparator and large-signal blockage circuits are completed.

Related Dissertations

  1. Research on Electromagnetic Acoustic Transducer Detection System Based on FPGA,TH878.2
  2. Study on Drive and Control System of Five-Phase PMSM Based on FPGA,TM341
  3. Development of LXI Arbitrary Waveform Generator,TM935
  4. Design of Digital Predistorter for RF Power Amplifier Based on FPGA,TN722.75
  5. Synchronization and Channel Estimation Algorithm in Bursted OFDM System and Its Implementation on FPGA,TN919.3
  6. Performance Analysis of Anti-Multipath Capability in DSSS System and Study on the Compensation Methods,TN914.42
  7. Optimizing and Realising Research on Vedio Compression in TV Guidance System,TN919.81
  8. Research and Hardware Simulation of Multiuser Spread Spectrum Code Acquisition Based on FPGA,TN914.42
  9. Research on Basic Algorithms of Digital Image Processing and Implementation with FPGA,TP391.41
  10. Research of High Speed Image Pre-processing System Based on FPGA,TP391.41
  11. Design of High-Speed Digital Image Acquisition and Interface Based on FPGA,TP274.2
  12. Development of Inductance Sensor Data Acquisition System Based on FPGA,TP274.2
  13. Development of Serial Bus Analyzer Based on Nios,TP274
  14. Development of PMC High-speed Data Transmission Board Design Based on FPGA-RocketIO_X,TP274.2
  15. Development of Pxibus High Performance Digital I/O Module,TP274
  16. Development of LXI Counter,TP274
  17. A High-Speed and Real-Time Data Acquisition System Based on FPGA,TP274.2
  18. Design of GPS Information Receiving System Based on Nios Ⅱ,TN967.1
  19. Temperature and pressure explosives temperature field memory test technology,TQ560.7
  20. Erbium-doped fiber amplifier pump laser drive source research applications,TN248
  21. Mine Risk Information Integration and Intelligent Early Warning,X936

CLC: > Industrial Technology > Arms industry > Ammunition, fuses, pyrotechnics > Fuse > General issues
© 2012 www.DissertationTopic.Net  Mobile