Dissertation > Excellent graduate degree dissertation topics show

Study of Narrow Truss Suspension Bridge Flutter Stability

Author: MaLinLin
Tutor: LiuJianXin
School: Chang'an University
Course: Bridge and Tunnel Engineering
Keywords: flutter wind-induced vibration flutter critical wind speed parameters
CLC: U441.3
Type: Master's thesis
Year: 2011
Downloads: 31
Quote: 2
Read: Download Dissertation

Abstract


Suspension bridge can make full use of materials, and has the characteristics of light weight and provincial materials, therefore in various system of bridge, suspension bridge spanning capacity is the largest, span can achieve 1000 meters. The major disadvantage of suspension bridge is stiffness small, easy to produce larger deflection and vibration, should pay attention to take corresponding measures.With span increasing, structure of rigid smaller and smaller; The use of steel make the whole structure of self-respect mitigated, damping corresponding decrease,and then presents how to improve long-span bridges the wind resistance problems. In the design of large span bridge flutter, must ensure that its critical wind speed than exemplified place chatter of inspection wind speed, in order to avoid catastrophic flutter instability phenomena. In some cases, because other conditions,it is hardly to adjust the bridge’s basic forms of large cross-section, and chatter critical wind speed can not reach the required, the vibration control measures will be the only feasible scheme. Usually consider from three aspects, namely, structural measures, pneumatic measures and mechanical measures.The mainly goal of structural measures is to improve the structure of torsional rigidity, increases the structure of torsional vibration frequency, change the structure dynamic characteristics, improve bridge double clamped, dynamic stability, so can improve structure of wind resistance stability.Pneumatic measures is by selecting the aerodynamic stability good cross-section or when such as the cross-section shape of beams, tower structure elements of bridge due to various requirements will be very complex, often cannot fully satisfy wind resistance requirements, to the structure of the cross section shape modified or additional some external devices, thus to improve structure around the flow around state, reduce aerodynamic, reduce the wind-induced vibration amplitude, improve the wind resistance stability.Mechanical control measures mainly is installed on the stiffening girder assistive devices to increase structure damping, or on the structure add a certain weight to improve the quality of structure of aerodynamic stability so as to reduce the wind-induced vibration. Goal is to reduce the bridge structure component of the overall or vibration output.Taking saiwudiegeer bridge and liujiaxia bridge for study, research based on structural measures and pneumatic measures to truss suspension bridge flutter critical wind speed impact. Xinjiang bridge in the original design scheme not through situations, against the wind cable, central fasteners and various bridge structure of wind resistance measures do experiments. In the original design scheme of liujiaxia bridge not through conditions, to fluctuation central stable board, guide plate, impact-proof column detail structure and impact-proof column height to the changes and experimental research, in various combination scheme, choose the most economical, beautiful, effectively plan.

Related Dissertations

  1. Study of Automobile Ignition Coil Testing System Based on Standard LAH032.905,U472.9
  2. AutoCAD Mechanical design aids based research and development,TH122
  3. Numericai, Simulation fo Wind Pressure and Wind Vibration Response of Long-Span Space Structure,TU312.1
  4. Based on MIMO System Flutter Derivative Identification and Suspension Bridge Flutter and Buffeting Research,U441.3
  5. New high-frequency electro-hydraulic Flutter Design and experimental study,TB534.2
  6. 2D digital valve and the static and dynamic characteristics of nonlinear compensation deadband,TH137.52
  7. Telephone-based channel voiceprint recognition algorithm,TN912.34
  8. High-precision measurement of electrical parameters and harmonic analysis research,TM933.4
  9. Parametric optimization method of positioning the product family,TB472
  10. Based on virtual manufacturing sheet metal forming simulation technology,TP391.9
  11. Study coaxial microwave dielectric filters,TN713
  12. Analysis of musical styles,J605
  13. DSC-based Power System Harmonic Measurement Method,TM935.2
  14. Based on Acoustic Emission Technique Aramid 1414 / tensile damage behavior of polypropylene,TQ325.14
  15. Performance of GSM network optimization,TN929.532
  16. Cardiovascular under anesthesia multi-parameter monitoring system software development,R614
  17. Monte Carlo simulation cC 4 F 8 and CHF 3 mixed gas discharge characteristics,TM213
  18. The Development of the Interference Testing System for Optical Fiber Connector Surface,TN253
  19. Improving on Technology for SLS Rapid Prototyping,TF124.5
  20. Based on stimulated Brillouin scattering fiber speed of light dimmable delay characteristics,O437.2
  21. Absorption - Photo-assisted oxidation process emissions of methylene chloride,X701.7

CLC: > Transportation > Road transport > Bridges and Culverts > Structural principles, structural mechanics > Bridge vibration and damping device
© 2012 www.DissertationTopic.Net  Mobile