Dissertation > Excellent graduate degree dissertation topics show

Investigation & Simulation on Hoisting System of Truck Crane

Author: HeXin
Tutor: ZhaoLiJun；FengZhongXu
School: Chang'an University
Course: Mechanical and Electronic Engineering
Keywords: truck crane hoisting system dynamic characteristic simulation analysis
CLC: TH213.6
Type: Master's thesis
Year: 2011
Downloads: 251
Quote: 2
Read: Download Dissertation

Abstract


Truck crane is a kind of mobile crane equipment which is very extensive applied and the quality of dynamic performance of its hoisting system plays an important role in the overall performance of the product. In recent, because the internal design of hydraulic system and the selection of each component of crane are only based on the static performance of the system, theoretical calculation and the definers’ previous experience, the quality of the system’s dynamic performance cannot be examined until the product is molded into shape. If the design of the system is improper and the dynamic performance is not good enough, the system should be redesigned which would greatly extend the design cycle and increase the cost of research and invention. While by using the computer simulation to analyze the design and evaluate its dynamic performance after the system’s preliminary design, the designer can improve the structure of the system or correct the parameters and finally get the ideal results.The emphasis of this dissertation is to make deep analysis of the dynamic characteristics of the hoisting system with the operation of AMESIM simulation software. And the author takes some type of truck crane as the research object.(1) The dissertation first analyses the structure of the hoisting system and the theory of hydraulic system, then makes a reverse proof which ascertains most of the parameters and lays the foundation of the follow-up simulation work.(2) By using the AMESIM simulation software, the designer models the key components-balancing valve in the descending condition of the hoisting system and preliminarily determines the accuracy of the model.(3) The designer makes a simulation model of the whole hoisting system and analyses it by dividing it into two typical conditions---rising and descending. Meanwhile, the designer analyses the phenomenon of secondary slide which often occurs in hoisting system, finds the main factors affecting its sliding range and puts forward the corresponding solutions.(4) The dissertation analyses the energy consumption of hydraulic pump in the descending condition, illustrates the reason that loads sensitive balancing valve is more efficient when compared with the traditional one, and also points out that the variable pump proper should be adjust according to the size of the load in the condition of hoist, so it can be helpful to reduce the engine’s specific fuel oil of consumption and energy consumption.The dissertation successfully establishes the model of hoisting system by using the AMESIM software, makes a deep analysis and research of the simulation results of each variation which provide relevant theoretical evidence for the design and improvement of truck crane’s hoisting system, and makes a practical significance on the research of crane hoisting system by using AMESIM simulation software.

Related Dissertations

  1. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  2. Stability Analysis of Roller Compacted Concrete Gravity Dam Based on Time-history Method,TV642.2
  3. Injection Process Analysis and Optimized Deign of MP4 Product Based on the Moldflow Software,TQ320.662
  4. 1200 tons automatic autoclaved fly ash brick molding equipment research and design of hydraulic systems,X705
  5. Mine shaft hoisting system security risk assessment study,TD53
  6. Study on the Subsurface Crack of Supporting Roller Made of Austempered Ductile Iron,TG156.3
  7. On User-Oriented Analysis Simulations of Reconfigurable Modular Robots,TP242
  8. Decision Design and Research on Moving-iron Linear Oscillatory Motor with Two Separated Stators,TM359.4
  9. Simulation Analysis of Semi-Active Suspension Based on Fuzzy Control,U463.33
  10. Research on a Vehicle Crane Operating Simulation System,TH213.6
  11. Research on Multi-Domain Coupling Modeling and Simulation of Hydraulic Crane Hoisting System Based on MODELICA,TH21
  12. The Research and Design of Spacecraft Solar Wings Dynamic Effects Measurement System,V416.8
  13. Analysis and Simulation of Static and Dynamic Characteristic for Electromangetic Mechanism of DC Contactor,TM572.1
  14. Key components of crane Intelligent Fault Diagnosis System Development,TH213.6
  15. Keyway milling of ultrafine pole,TG54
  16. Automated welding boiler membrane wall design and research,TG409
  17. 2D digital valve and the static and dynamic characteristics of nonlinear compensation deadband,TH137.52
  18. Based on the deck of the lifting platform telescopic cylinders electro-hydraulic control system studies,TH137
  19. Concrete pumping system hydraulic shock and stroke deviation Optimization,TU646
  20. Regional grid operation Evaluation Index System and Evaluation Method,TM732
  21. Research for the Characteristics of Slewing Control Valve on Truck Crane,TH137

CLC: > Industrial Technology > Machinery and Instrument Industry > Lifting machinery and transport machinery > Lifting machinery > Mobile crane > Wheel
© 2012 www.DissertationTopic.Net  Mobile