Dissertation > Excellent graduate degree dissertation topics show

Design of Multi-Mode Operation Green-Mode Switching Power Supply Controller

Author: DuanLiYe
Tutor: ZengYun
School: Hunan University
Course: Microelectronics and Solid State Electronics
Keywords: Switching Power Supply Controller Multi-mode Protection Circuit Burst Mode Voltage Feed-Forward
CLC: TN86
Type: Master's thesis
Year: 2009
Downloads: 324
Quote: 2
Read: Download Dissertation

Abstract


Efficient green mode power supplies are indispensable parts in active electronic systems. Integrated circuit with multi-mode control and protect functions is the kernel of the power supply system. Advanced PWM control integrated circuits can obviously reduce the size of today’s power supplies and improve their efficiency and reliability.In this paper, we designed a highly efficient low-interference green mode switching power supply controller. Multi-mode operation which include Quasi- Resonant, PFM and Burst mode make it possible to achieve high conversion efficiency in a wide range of load. Burst mode ensures that power consumption in standby time is less than 0.3 watt. Quasi-resonant mode can improve the conversion efficiency and reduce the electromagnetic interference at the same time.In order to achieve reliable quasi-resonant operation, the design of an accurate valley detection circuit is very critical, Because opening the power MOSFET at time when the MOSFET drain voltage is lowest can minimize opening lose.In switching power supply was activated, the voltage between the two ends of the capacitor in load side is zero, which is equivalent to a very heavy load, may result in false overload or over-current protection. To resolve this problem we can shield the protection for a short time after the system starts, but that not only reduces the reliability of the chip, but also causes "inrush current" at input side, which debase the quality of power line, meanwhile it causes electromagnetic interference (EMI) and many other issues. So we designed a soft-start circuit to charge the load capacitor step by step after the system starts. The soft start process is over when the load capacitor voltage reaches the rated output voltage and the system automatically switches to normal mode.In addition, in order to enhance the stability and reliability of the chip, we designed advanced protection circuits, including overload protection, over-voltage protection, under-voltage lockout, over-current protection, over-temperature protection and so on, They can protect the power supply system and the chip itself in all foreseeable severe environments.To resolve the problem that voltage feed-forward characteristics are sacrificed to some extent in current mode quasi-resonant converters. The cause of the problem is analyzed and a solution is proposed in this paper. A voltage feed-forward compensation module was designed. With this module in chip, the voltage regulation can be reduced to 0.17% from 0.5% in the same power supply system. The improvement of voltage feedforward can not only improve the quality of power output, but also reduce the size of filter capacitors to save manufacturing costs. In small-capacity power supply with only passive power factor correction (PPFC) circuit, a small filter capacitor can also help the system improve power factor.

Related Dissertations

  1. Investigate the Value of CT Reconstruction of Multi-mode After T-tube Cholangiography or ERCP in the Biliary Tract Disease,R657.4
  2. Design of a 2.5GHz PLL Clock Generator,TN911.8
  3. RF front-end design of ultra-wideband transmitter,TN858
  4. Optimization Model and Algorithm for Bus Lane Network Design in Multi-modal Urban Traffic System,U491.22
  5. Study of Reflection-type Fiber-optic Biosensor Based on Multimode Interference,TP212.3
  6. The Study on Characterisce of Multi-wavegength Phtonic Crsytal Wavelength Division Multiplexers Based Multimode Interference Thoery,TN929.11
  7. Research on Multi-Mode Pulse Generator System for Array Holes of Micro-Jet Parts,TG661
  8. Research on Block Matching Motion Estimation Algorithm in Video Compression,TP391.41
  9. Research on Improving Mechanism of Multi-mode Instruction Decoder of QEMU,TP391.2
  10. The Research of Airchina High Frequency Communication System,TN925
  11. Design and Realizeation of I/O PAD on SOI CMOS Technology,TN432
  12. Research and Design of multimode biometric authentication prototype system,TP391.41
  13. Design and Implementation of Multimode IEEE802.11 Wireless Access Point,TN925.93
  14. The Research of a New Structure of Multicore Fiber Lasers,TN248
  15. Study on Permanent Magnet Wind Power Control System,TM614
  16. Based on AES, RSA encryption algorithm for multi -mode hybrid system design,TP309.7
  17. Study of Fault Signal Identification and Protection Co-operation of Fault Current Limiter in 500kV Power Grid,TM471
  18. Reed-Solomon decoder implementation study,TN762
  19. Multi-mode design method of humanoid intelligent controller study,TP273.5
  20. Research on Modal Noise in Multimode Fiber Microwave Photonic Links,TN929.11
  21. Study on Discharge Characteristics and Thermal Properties of Pulse Thyristors,TN34

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Radio equipment,telecommunications equipment > Power supply
© 2012 www.DissertationTopic.Net  Mobile