Dissertation > Excellent graduate degree dissertation topics show

Analysis of Parameter Calculation and Optimization in Vibration Isolation System Based on Genetic Algorithm

Author: XueFeng
Tutor: JiangGuoHe
School: Jiangsu University of Science and Technology
Course: Marine Engineering
Keywords: towed array sonar vibration isolation system (VIS) vibration level difference parameter calculation Genetic Algorithm (GA) parameter optimization
CLC: TB535.1
Type: Master's thesis
Year: 2011
Downloads: 34
Quote: 0
Read: Download Dissertation

Abstract


Research on parameter calculation and parameter optimization of vibration isolation system in towed array sonar is very important in naval engineering. In this paper, vibration isolation system was taken as the object for study. According to the structure characteristics of vibration isolation system, fluid-structure coupling field model of vibration isolation system was constructed by using finite element method. The influence of vibration isolation was calculated. The numerical simulation results were compared with experimental results. In addition,improved Genetic Algorithm (GA) method was used to realize parameter optimization of vibration isolation system.The main contents of this dissertation are given as follows:Firstly, fluid-structure coupling field model of 24m vibration isolation system was constructed by using ANSYS according to its structure characteristics. Based on finite element models, static analysis, modal analysis and harmonic response analysis have been done. The numerical simulation results were compared with experimental results to verify the model correctly. Secondly, material parameters and structural parameters which influence the capability of vibration isolation system were computed. And vibration isolation capability was calculated by considering acoustic module of vibration isolation system. Thirdly, the second development of ANSYS was based on APDL language. Parameter analysis files of vibration isolation system were established by using APDL language. Combined finite element method with adaptive improved pseudo parallel Genetic Algorithm, optimization procedures of adaptive improved pseudo parallel Genetic Algorithm was designed to realize parameter calculation and parameter optimization of vibration isolation system. In addition, vibration isolation system which include acoustic module was also calculated and optimized.Through the numerical modeling calculating research on all the aspects, a series of conclusions on vibration isolation characteristics and parameter optimization of vibration isolation system were obtained and they will be valuable in the practical project. These conclusions can be available for reference to the design of vibration isolation module in towed array sonar.

Related Dissertations

  1. The Technological Parameter Analysis and Influencing Factor Research on RUV4 Automobile Ignition Coils,U463.64
  2. Hot air drying characteristics of lettuce osmotic dehydration mass transfer kinetics and permeability,TS255.52
  3. The Studies on Some Improvements of the GA and Their Applications in SVM,TP18
  4. Phased array ultrasonic testing optimization of key parameters,TP274.53
  5. Intelligent Support Vector Machine Approach and Its Application on Melt Index Prediction in Propylene Polymerization,TQ325.14
  6. Luan River pulverized coal-fired power plant ash removal system design and system optimization selection,X773
  7. Based on support vector machine motion prediction image stabilization technology,TP751
  8. Polyester and viscose blended yarn MVS yarn spinning process and its impact on the performance and structure of,TS104
  9. Reluctance mixing rotor windings shorted BDFM key technology research,TM34
  10. More rarely slot reactance permanent magnet synchronous motor parameter calculation and research,TM341
  11. Including wind farm grid voltage stability studies,TM712
  12. Automatic Target Recognition fluorescent magnetic particle inspection image processing techniques,TP391.41
  13. Neural Network Based on Particle Swarm Optimization color injection molding process,TQ320.662
  14. Mold cavity surface MRF technology research,TG580.692
  15. ABS -based high-speed milling of aluminum hydraulic valve Processing Research,TG54
  16. Radial variable piston pump / motor with a high-speed switching valve and solenoid research,TH134
  17. Based on PCA and SVM automotive coating line electromechanical equipment intelligent diagnosis,TH165.3
  18. DORIS system orbit determination method,V412.41
  19. Personalized seat cabin air parameter optimization of experimental study,V223.2
  20. Consider the track vertical curve caused by the interference of suspended load control technology,U266.4
  21. Locomotive wheels Process Analysis and Optimization,U260.33

CLC: > Industrial Technology > General industrial technology > Acoustic engineering > Vibration, noise and its control > Vibration and noise control and its use > Vibration isolation, damping materials and structures
© 2012 www.DissertationTopic.Net  Mobile