Dissertation > Excellent graduate degree dissertation topics show

Development of Inductance Sensor Data Acquisition System Based on FPGA

Author: JinChangJiang
Tutor: TangWenYan
School: Harbin Institute of Technology
Course: Instrument Science and Technology
Keywords: inductance sensor FPGA data acquisition system Nios II USB
CLC: TP274.2
Type: Master's thesis
Year: 2008
Downloads: 416
Quote: 2
Read: Download Dissertation


Inductance sensor, with an extra high resolution, high reliability and extremely long campaign life, has been widely applied to the measurement of micro-displacement. In data acquisition system (DAS), conditioning circuit was composed of discrete components, and control circuit adopted microprocessor with limit resources and slow speed. Such is unfavorable to miniaturization and assurance of the Reliability. With the rapid development of integrated circuit, conditioning circuit integrated resolution has appeared, and FPGA is widely used in DAS control circuit because of its rich resources and imbedded controller. This paper takes the development of inductance sensor data acquisition system based on FPGA as the research contents. The specific studies are as follows:This paper briefly introduces the development of inductance sensor and its DAS at home and abroad. On the basis of summarizing the development course and direction of DAS, control core based on FPGA and Nios II soft-core processor is determined.The hardware system of DAS contains analog and digital circuit. The main function of analog circuit is conditioning signal, amplifying-filtering, A/D converter and anti-interference. Digital circuit takes EP1C3 as core, and implements A/D conversion, FIFO buffer, USB interface control logic by using Nios II soft-core processor. System software contains includes USB communication program (firmware and driver) and the application software in PC. This paper makes full use of Nios II soft-core to construct program framework by using C/C++ language Nios II integrated development environment. The driver and host application software are designed in Visual C++ 6.0 and its assistant software DriverStudio and DDK.Finally, experimental results show that DAS basically achieves the design requirements, which lay a good foundation for further practical product development.

Related Dissertations

  1. Design of Electronicalcontrol System for Electronic Jacquard Knitting Machine,TS183
  2. Research on the Integrated Grating Subdividing Digital Display Device Based on DSP,TH822
  3. Research on Electromagnetic Acoustic Transducer Detection System Based on FPGA,TH878.2
  4. Study on Drive and Control System of Five-Phase PMSM Based on FPGA,TM341
  5. Development of LXI Arbitrary Waveform Generator,TM935
  6. Design of Digital Predistorter for RF Power Amplifier Based on FPGA,TN722.75
  7. Synchronization and Channel Estimation Algorithm in Bursted OFDM System and Its Implementation on FPGA,TN919.3
  8. Performance Analysis of Anti-Multipath Capability in DSSS System and Study on the Compensation Methods,TN914.42
  9. Optimizing and Realising Research on Vedio Compression in TV Guidance System,TN919.81
  10. Research and Hardware Simulation of Multiuser Spread Spectrum Code Acquisition Based on FPGA,TN914.42
  11. Design of Wearable Computer’ Multiprocessor Based on SOPC,TP332
  12. Research on Basic Algorithms of Digital Image Processing and Implementation with FPGA,TP391.41
  13. Research of High Speed Image Pre-processing System Based on FPGA,TP391.41
  14. Development of the Missile Controller in Servo Systems Based on NIOS II,TP273
  15. Development of 3-Dimensional Scanning Probe Data Acquisition System Based on DSP,TP274.2
  16. Design of High-Speed Digital Image Acquisition and Interface Based on FPGA,TP274.2
  17. Development of Serial Bus Analyzer Based on Nios,TP274
  18. Development of PMC High-speed Data Transmission Board Design Based on FPGA-RocketIO_X,TP274.2
  19. Development of Pxibus High Performance Digital I/O Module,TP274
  20. Development of LXI Counter,TP274

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Data processing, data processing system > Data collection and processing systems
© 2012 www.DissertationTopic.Net  Mobile