Dissertation > Excellent graduate degree dissertation topics show

Fretting Wear Behavior of Alloy-800 at High Temperature

Author: ZhangXiaoYu
Tutor: RenPingDi
School: Southwest Jiaotong University
Course: Materials Science and Engineering
Keywords: Nuclear power material Alloy-800 Steam generator High temperature Fretting wear
CLC: TG115.58
Type: Master's thesis
Year: 2009
Downloads: 116
Quote: 3
Read: Download Dissertation

Abstract


Energy has been a strategic problem which limits sustaining economy development of our nation.However,nuclear energy is one of the main paths to solve the energy issue.A steam generator(SG) tube materials in nuclear power plants is one of the most important components.Fretting wear has become one of the primary reason to steam generator(SG) tube cracking.So investigation on Fretting wear and damage mechanisms of steam generator(SG) tube at high temperature are of great imporptance in prolonging steam generator(SG) tube’ life and improving the reliability of steam generator(SG) tube.The fretting wear behavior of Alloy-800 steam generator tube materials has been investigatded on a Deltalab-Nene7 under normal load(80N),displacement amplitudes (2-80μm) and temperatures(25℃,300℃and 400℃).Fretting wear behaviours were analyzed in combination with microscopic exminations through optical microscope, laser confocal scanning microscopy(LCSM) and scanning microscope(SEM).The following conclusions were obtained.1.Fretting running rule of Alloy-800 steam generator tube materials obey the fretting maps theory under three temperatures.Fretting running regimes of Alloy-800 steam generator tube materials are made up of partial slip regime,mixed regime and slip regime.2.The fretting regime of Alloy-800 is transformed from partial slip regime into mixed fretting regime and gross slip regime by its fretting behavior with increasing displacement amplitude at the same normal load and temperature conditions,fretting regime almost not change with the increase of temperature.3.The friction coefficients decrease with the increase of temperature in mixed fretting regime and gross slip regime;with the temperature changes from25℃to400℃,friction oxidation have a accelerated oxidation function,oxidation body had been eased film due to wear debris in the process of fretting wear;hower, for partial slip regime the friction coefficients hardly change with the change of temperature.4.Abrasive wear and oxidation are main fretting wear mechanisms of Alloy-800 at the temperature(T=25℃).The fretting wear mechanisms of Alloy-800 exhibited mainly friction oxidation,abrasive wear and delamination mechanism at high temperatures(T=300℃and T=400℃).

Related Dissertations

  1. Photosynthetic Apparatus Response to Heat Stress and the Mechanisms in Two Different Cotton with Various Leaf Colours,Q945.11
  2. Preparation and Properties of High Temperature Tolerance Microemulsified Acid,TE39
  3. The Optimizing Study on Aerobic Composting of Dairy Farm Dejecta,S141.4
  4. Preparation and Characterization of Luminescent Lanthanide Materials BaMoO4:Eu3+,TB34
  5. Research on High-temperature Physical Properties and Mechanical Properties of Stainless Steel,TG142.71
  6. Research based on the depth -sensitive indentation nickel-base superalloy fatigue micromechanical properties,TG115.57
  7. Analysis on Crack of Non-oriented Silicon Steel during Thin Slab Casting and Rolling Process,TG335.55
  8. Research on Optimization Secondary Cooling System of CCSD36 Medium Plate Continuous Casting,TF777.1
  9. The Huabei Oilfield Xiliu 10 fault block Sham Tseng high temperature dispensing technology research and application,TE357.6
  10. Research and Application of High Strength and High-temperature Resistance Water Shutoff Agent,TE39
  11. Research and Application of Deep Profile Control & Oil Displacement by GEL in High-temperature Oilfield,TE357.46
  12. Study on High Temperature Plugging Agent Suitable for Sudan UNITY Oilfield,TE39
  13. A Study on the Properties of Oil Cement Stone in Ultra-deep Well,TE256.3
  14. TiAl Alloys SPS sintering of Microstructure and High Temperature Oxidation,TF124.5
  15. Research on Stimulative Effect of Additives on Sulfur-retention at High Temperature during Coal Combustion,X701.3
  16. Optimization of Monitoring and Controlling System in High-temperature Gas-solid Two-phase Flow Wind Tunnel Application,TP277
  17. Screening Efficient Degradation of Cellulose Strains and Preliminary Study on Utilizing Straw to Ferment Ethanol,S38
  18. Research of the Monitoring System for Rice Plant under High Temperature Based on WSN,S42
  19. Effects of High Temperature Stress on Photochemical Activity of Psii in Tobacco Transformed with Cagpat Gene,S572
  20. Hosta varieties resistant varieties of resource classification and filtering,S682.19
  21. Study on the Responses of Photosynthesis Under High-temperature of Syringa.l,S685.26

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Metallurgy ( Physical Metallurgy ) > Analytical tests of the metal (Metal Testing and Materials ) > Mechanical properties ( mechanical properties ) test > Friction and wear test
© 2012 www.DissertationTopic.Net  Mobile