cable-stayed bridges are widly used for large-span bridges. As the main members to support the weight of the bridge, the stayed cables are prone to voi" />
Dissertation > Excellent graduate degree dissertation topics show

Theoretical and Numerical Analysis on the Parametric Vibration of Cables in Cable-stayed Bridges

Author: WangTao
Tutor: LiYongLe
School: Southwest Jiaotong University
Course: Bridge and Tunnel Engineering
Keywords: cable-stayed bridge cable parametric oscillation nonlinear oscillation finite element method
CLC: U441.3
Type: Master's thesis
Year: 2009
Downloads: 181
Quote: 5
Read: Download Dissertation

Abstract


The long span cable-stayed bridge' dissertation">cable-stayed bridges are widly used for large-span bridges. As the main members to support the weight of the bridge, the stayed cables are prone to voilence vihibit parametric oscillation with large amplitude under the wind or traffic loads due to it’s high flexibility ,low damping and small mass.This oscillation can greatly affect the performance of the bridge. In order to improve the design of cable-stayed bridge it is important to study the mechanism of the vibration and perform numerical analysis.First of all, the dynamic characteristics of the cables with different sags are investigated and the reason which cause the varition are discussed in this dissertation. And then, taking the idealized excitation and nonidealized excitation into consideration, the models of parametric oscillation for cables are built up. The nonlinear oscillation differential equation is got by Galerkin method. According to the equation, the influence of parametric excitation, external excitation, nonlinear terms and damping are investigated by multiple-scale method. Response curve is obtained for main resonance and parametric resonance by numerical analysis with Runge-Kutta method . In order to obtain the coupling nonlinear vibration equations, a coupling vibration model of in-plant and out-of-plant oscillation is built up. Multiple-scals method is used for calculating the equation set. The response curve of cables which in three-dimensional space is detemined for in-plant and out-of-plant coupling vibration by numerical method. Based on ANSYS, according to the characteristic of parametric oscillation, three-dimensional models for cables which take stress intensification and geometric nonlinearity into consideration are built up for transient analysis .The results show that there is a little distinction between finite element analysis and numerical analysis. At last, a three-demensinal finite element model is built up for a real bridge. According to the principle of parametric oscillation, we can find out which cable may occur main resonance or parametric resonance.The results can provide references for designing of cable-stayed bridges.

Related Dissertations

  1. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  2. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  3. Study on the Echo Processing Method for the Measurement of Wire Length Based on Pulsereflection,TM247
  4. Stability Analysis of Roller Compacted Concrete Gravity Dam Based on Time-history Method,TV642.2
  5. Research on Intelligent Aerial Bomb for Forest Fire Fighting,S762
  6. The Large Concrete Hydration Heat Temperature Effects Research of the Cable Stayed Bridge,U441.5
  7. Study of Modal Characteristics of a Car Body-in-White,U463.82
  8. Study on Construction Monitoring of Prestressed Concrete Low-pylon Cable-stayed Bridge,U445.466
  9. Studies on Wind-induced Dynamic Response and Vibration Control of Guyed Cat-head Transmission Tower-line System,TM753
  10. Problem Research on Reducing the Bullwhip Effect in Cable Assembling Supply Chain,F426.6
  11. Research on the Stability of Soft Rock Slope in Baorixile Open Pit Mine,TD824.7
  12. Decision Design and Research on Moving-iron Linear Oscillatory Motor with Two Separated Stators,TM359.4
  13. Sensitivity Analysis on Fatigue Reliability of a Turbine Disk Using Finite Element Method,V232.3
  14. Research narrower than the opening Kita highly optimized root,TU347
  15. Strength Analysis and Parameter Optimization of Single Channel Drum Dryer,TK173
  16. Structural Strength Analysis of Rotary Vane Dryer,TK173
  17. 110kV Submarine Power Cable’s New Technique Research Based Online Comprehensive Montior,TM247
  18. Study on Dynamic Space Structure of Groundwater on Land Use,P641.8
  19. The Technology Research on Bolt-mesh-anchor Support in Soft Coal Opening of Liudaojiang Coal Mine,TD353
  20. Fatigue Analysis and Life Prediction of a Loader’s Drive Axle Housing,TH243
  21. Principle and Experiment Research of Road Simulation Test Stand for Vehicle Parts,U467.3

CLC: > Transportation > Road transport > Bridges and Culverts > Structural principles, structural mechanics > Bridge vibration and damping device
© 2012 www.DissertationTopic.Net  Mobile