Dissertation > Excellent graduate degree dissertation topics show

The Realizaion of Ultrasonic Instrument Based on SOPC and DSP Technique

Author: MengQingXu
Tutor: HuangDanFei
School: Changchun University of Science and Technology
Course: Measuring Technology and Instruments
Keywords: SOPC DSP Nios II system DSC Ultrasonic Instrument
CLC: TH702
Type: Master's thesis
Year: 2009
Downloads: 89
Quote: 1
Read: Download Dissertation


This paper describes an implementation based on the the SOPC technology of ultrasound instrument DSC hardware design and its software control flow . First, the system functions defined on the basis of the Nios II processor system using ultrasonic instrument DSC system design . Analysis of the the ultrasonic instrument DSC works and the mathematical model of the system structure , the use of programmable logic resources in the FPGA design DSC hardware circuit module , and one by one the description and verification . Then use the DSP development tools based SOPC design image processing module with other modules , together with the Nios Ⅱ soft -core processor with on-chip Avlaon interactive bus connection , set up a complete ultrasound instrument DSC system . In addition, the use of remaining in the FPGA programmable logic resources and IP soft core constitute embedded system interface function module , data storage , distribution, transmission as well as the man-machine interface . Nios Ⅱ core DSP for algorithm processing program architecture , system scalability and high flexibility . DSP module by the control and management of the input and output of the coordination between the Nios II processing module with module and data , parameters , image processing and optimization . Both carry out their duties, to improve the performance of the system with the greatest efficiency . Nios Ⅱ soft core embedded , is very conducive to build their own specialized embedded systems . And more and more IP and third-party support to enhance the versatility of the Nios Ⅱ system .

Related Dissertations

  1. Design of Electronicalcontrol System for Electronic Jacquard Knitting Machine,TS183
  2. Research on the Integrated Grating Subdividing Digital Display Device Based on DSP,TH822
  3. Study on Two Dimensional of Auto-Collimator Based on DSP,TH741.14
  4. Research on Electromagnetic Acoustic Transducer Detection System Based on FPGA,TH878.2
  5. Study on the Control System for Automatic Aiming of HWIL Pitching Mechanism,TJ303
  6. Research on Synchronous Motor Excitation Control System,TM341
  7. The AES Algorithm and Its Implementation in DSP,TN918.1
  8. The Design of a DSP-Based Robot Speech Command Recgnition System,TN912.34
  9. Research on Signal Receiving System of Phase Laser Range Finder,TN249
  10. Study on Implementation Technology of Channel Estimation in OFDM System Based on DSP,TN919.3
  11. Optimizing and Realising Research on Vedio Compression in TV Guidance System,TN919.81
  12. Voice Signal De-noise Base on Wavelet and Arithmetic Implement with DSP,TN912.3
  13. Design of Wearable Computer’ Multiprocessor Based on SOPC,TP332
  14. Research on Image Compression and Implementation Using TMS320C6713 Based on SPIHT Algorithm,TP391.41
  15. A Study on the Technology of the Infrared Image Matching,TP391.41
  16. Development of 3-Dimensional Scanning Probe Data Acquisition System Based on DSP,TP274.2
  17. Development of Vxibus Common Interface Module Based on DSP,TP274
  18. Research of Acoustic Signal Acquisition System Based on DSP,TP274.2
  19. Study on Synthesizes of N-methyl Pyrrole Derivatives and Application in Cigarette,TQ655
  20. Studing on Water-holding Capacity and Its Controlling Methods of Fresh Chicken Meat,TS251.55
  21. Research of DSP-based Real-time Demodulation Method of One-frequency Laser Interferometer,TN911.3

CLC: > Industrial Technology > Machinery and Instrument Industry > Instruments, meters > General issues > Design, calculation and mapping
© 2012 www.DissertationTopic.Net  Mobile