Dissertation > Excellent graduate degree dissertation topics show

Research on Static and Dynamic Properties of Feeding System of High-speed and High-precision PCB CNC Drilling Machine

Author: GongMingXing
Tutor: LiJianYong
School: Beijing Jiaotong University
Course: Mechanical Manufacturing and Automation
Keywords: Feeding system Modal analysis Dynamics response FEA Stuctural topology optimization
CLC: TG659
Type: Master's thesis
Year: 2009
Downloads: 179
Quote: 6
Read: Download Dissertation

Abstract


The developing trend of PCB towards high-density, thin wire, the narrow spacing of the development makes PCB drilling become smaller and smaller and requires a higher precision and efficiency. The static and dynamic properties of the CNC drilling machine feeding system is one of the main factors that affect the precision. Improving the static and dynamic properties of this machine is of great significance to its processing capacity. This paper makes a study on the static and dynamic properties of feeding system with the use of two-axis PCB CNC drilling machine in a company.First, the study makes a research on the the components of feeding system with high-speed and high-precision as well as the operating characteristics of all parts and then build a reasonable solid model and a mathematical model of dynamics in the feeding system .In the process of building the mathematical model, the impact of these factors such as the plate deformation and the errors in the installation of guide rails will be well reflected in the model through the finite element technique.Second, study on the static and dynamic characteristics of the feeding system in the case of the ball screw in the cases of the "fixed - support" and "fixed - fixed", and find that the first program will set up resonance in the basic frequency and the dynamic response is poor. However, the second program is better than the first one; Further more, the study will get the stiffness of plate and the deflection curve of the installation error and the screw as well as the impact of deflection on the system performance; The study will also probe into a weak link in the system through the sensitivity analysis and dynamic simulation analysis, and study the improvement direction of the static and dynamic characteristics of the system as well as the corresponding parameters.Finally, the study will make structural topology optimization plate design on the weak links, and the optimizing results will be used in the solid re-modeling. And the simulation analysis of dynamic characteristics of the system will be made to get the improvement on the static and dynamic characteristics of the system after the system has been optimized, which proves the practicality of this paper, and will play a role in the theoretical guide.

Related Dissertations

  1. Finite Element Analysis and Optimization Design of a Tractor Cab,S219.02
  2. Design of Motorcycle Frame and Its Mechanics Analysis,U483
  3. Study of Modal Characteristics of a Car Body-in-White,U463.82
  4. Dynamic Analysis on a High-speed Railroad Laneway-stacker of Three-dimensional Warehouse,TH246
  5. Modal Analysis of BIW Construction & Optimization Design in Modal Parameters,U463.82
  6. Strength Finite Element Analysis on Crankshaft Based on ANSYS,TK423
  7. Research and Application of Optimal Control Method for Quantitative Feed System of LF,TF345
  8. Study on Dynamic Behaviors of a Certain Type Aero-engine Based on Co-Simulation Technology,V231
  9. The Fatigue Life Study of a Car Body Based on the Random Vibration,U463.82
  10. Research on the Dynamic Characteristics of 3DOF Manipulator,TP242
  11. Analysis and Evaluation of Some Heavy Truck Drive Axle Housing’s Static and Dynamic Characteristics,U463.218.5
  12. The Finite Element Analysis and Topology Optimization of Kingpin for Bogie,U270.33
  13. Dynamic Analysis of the Traction Elevator System with Finite Element Method,TU857
  14. Modal Analysis, Finite Element Modeling and Stress Calculation of Boom of 46D Truck-mounted Concrete Pump,TU646
  15. Finite Element Simulation and Research of Fine-blanking and Die Clearance,TG386
  16. A 2D Coplanar Translation Stage with Synchronous Xy Position Metrology for Surface Scanning Measurement,TB9
  17. The Design and Research of a New Type of Clamping Elements for Roller Guide,TG659
  18. Analysis of Pre-Stress and Structural Characteristic of Space Film Reflect-Array,TU38
  19. Parallel six-dimensional shaking table Design and Research,TH762.2
  20. Vehicle-mounted snubbing workover rig derrick Design and analysis,TE935
  21. Direct-drive A / C -axis CNC universal milling head swivel double Finite Element Analysis,TG547

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal cutting and machine tools > Program control machine tools, CNC machine tools and machining
© 2012 www.DissertationTopic.Net  Mobile