Dissertation > Excellent graduate degree dissertation topics show

Study on Direct Torque Control System for Permanent Magnet Synchronous Motor Basedon TMS320F2812

Author: ZhaoFei
Tutor: LiWeiLi
School: Harbin University of Science and Technology
Course: Motor and electrical
Keywords: Permanent magnetic sinusoidal motor Direct torque control Space vector pulse width modulation TMS320F2812 Fuzzy PI
CLC: TM341
Type: Master's thesis
Year: 2009
Downloads: 454
Quote: 2
Read: Download Dissertation

Abstract


Along with the fast development of the motor production technology, power electronics and microelectronics, servo control system has been used in the field of industrial control and household appliances widely, and AC servo control system has become a development trend of servo control system. Therefore, to study the full-digital permanent magnetic synchronous AC servo control system whose executive motor is permanent magnetic synchronous motor, core component is DSP, and control strategy is direct torque control has an particularly important practical significance.Some research and amelioration on direct torque control system of permanent magnet synchronous motor has been done in this paper. Direct Torque Control (DTC) is a novel technology of frequency conversion after the vector control in the field of AC drive systems. Conventional DTC has some advantages, such as easy implementation, fast response and less effect of motor parameters’change, so a better dynamic performance can be obtained, but some large ripples of torque also exist. Aiming at the shortcomings of conventional DTC, a novel direct torque control system based on space-voltage vector pulse width modulation (SVPWM) is proposed in this paper. The SVPWM can help the inverter to realize continuous voltage vector modulation, decrease the current harmonic component, and restrain the torque ripples, and the DC bus voltage utilization can be improved and the speed range of the system can be expanded; meanwhile, fuzzy PI technology is applied in the speed controller to improve the response characteristic of the system .Based on the theoretical analysis of 3-phase permanent magnetic sinusoidal motor (PMSM), a mathematical model of PMSM and the simulation model of permanent synchronous motor system based on DTC have been built; furthermore, a lot of simulation researches have been done based on these models. To design the control system, the digital signal processor TMS320F2812 produced in TI Company is used as kernel control chip, and plentiful experimental tests have been done. The simulation and the experiment results show that the permanent magnet synchronous motor system designed in this paper not only can preserve the fast response performance of DTC, but also it can decrease the ripples of torque effectively.

Related Dissertations

  1. Simulation Research on Compound-Structure Permanent-Magnet Synchronous Machine System Used in Hybrid Electric Vehicles,TM341
  2. Design of Arbitrary Order Harmonic Generator Based on Digital Signal Processing,TM935
  3. The Development about Control System of Slack Turning Machine and Vector Control Simulation of Asynchronous Machine,TQ440.5
  4. Research on Selectivity Leakage Protection for Underground Low Voltage Distribution Network,TD611.5
  5. Research on Variable-Frequency Adjustable-Speed System for Mining Battery Locomotive,TM921.51
  6. DSP and FPGA System Based on Harmonic Analysis,TM711
  7. Research on Synthetical Automatic Gauge Control of 1700 Tandem Cold Mill,TG334.9
  8. The Design and Study of Control System of Car-type Heat Treating Furnace,TG155.92
  9. Research and Development of Stability Monitoring System for Small and Medium Hydropower Units,TV734.2
  10. J-TEXT Tokamak Electric Drift Electron Injection Power System Design,TL631.24
  11. Electro-Hydraulic Power Steering System Based on DSP,U463.4
  12. Research and Development of a DSP Based Monitoring System,TV738
  13. The Research of Switching Power Amplifier for Microprocessor Relay Protection Testing System,TM774
  14. VSCF doubly-fed wind turbine maximum power point tracking control,TM614
  15. Based on permanent magnet synchronous gearless traction machine elevator saving drive and control system design and implementation,TP273
  16. PI control algorithm based on fuzzy inkjet printer ink system design studies,TS803.6
  17. Based on aircraft ejection seat posture Simulation Algorithm Research and Implementation,V244.212
  18. Supercapacitor-based energy technology research and implementation of the elevator,TM92
  19. DSP FPGA -based near-infrared detector key technology research,TN791
  20. Based aircraft life-saving equipment data acquisition system design and CAN bus transmission,TP274.2
  21. A Comprehensive Protection Unit Development for under Mine Power Switch,TM564

CLC: > Industrial Technology > Electrotechnical > Motor > AC motor > Synchronous motor
© 2012 www.DissertationTopic.Net  Mobile