Dissertation > Excellent graduate degree dissertation topics show

The Research of an Optical Fibre Doped with Semiconductor Nano-Particles

Author: ChenZuo
Tutor: ZhangRu
School: Beijing University of Posts and Telecommunications
Course: Physical Electronics
Keywords: nonlinear optical fibre nano-material finite element method effective core area nonlinear coefficient
CLC: TN253
Type: Master's thesis
Year: 2009
Downloads: 83
Quote: 2
Read: Download Dissertation

Abstract


With the rapid growth of the information needs nowadays, optical communication technology becomes the core of the information highway, and currently fiber optic networks are moving in the direction of the development of all-optical networks. The all-optical wavelength conversion technology, which based on the FWM （Four-Wave Mixing） technology of high nonlinear fibre, has the advantages of broadband multi-channel transform capacity, ultra-high response speed that more excellent than the electronic devices’ rate limit, shows the wild usage in WDM networks. Therefore, the research on high nonlinear fibre becomes a hot spot of the functional fibre research filed.First of all, this article states the overview of nonlinear optical research. Then combined the nano-technology with the fibre fabrication technology, the InP particles at nano-scale is chosen to fabricate the novel optical fibre doped with InP through a modified MCVD （Modified Chemical Vapor Deposition）. Compared with ordinary optical fiber, this fibre is special that it has InP particles doped in its core. Through experiment, the consistency of InP is approximately 0.1% in the core, and the particles scale is about 20nm, and the fibre has an excellent waveguide characteristic. Based on the experiment, a core model that the particles uniformly distributed in is built, and obtained the effective refractive index neff = 1.400 and the effective core area Aeff≈10.01μm2 that is less than ordinary fibre and different with ordinary refractive index distribution. According to the result above, the nonlinear coefficientγ≈10.53W-1/km is got, and this result reflects that this novel optical fibre has a strong nonlinearity.Based on the research above, we got this conclusion that, a more cyclical distribution and less dense of the particles in the core will have a less propagation loss, a better light control performance, and a higher nonlinearity, so that it can be easily used in multiple optoelectronic devices. This research leads a way for continuous research.At last, this article gives a brilliant future of this fibre and believes that this kind of fibre can open up new roads in nonlinear fibre field.

Related Dissertations

  1. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  2. Stability Analysis of Roller Compacted Concrete Gravity Dam Based on Time-history Method,TV642.2
  3. Studies on Wind-induced Dynamic Response and Vibration Control of Guyed Cat-head Transmission Tower-line System,TM753
  4. Finite Element Analysis and Optimization Design of Flat-head Tower Crane’s Rotating Platform,TH213.3
  5. Study on the Influence of Various Defects on the Characteristics of Infrared Photonic Crystal Fiber,TN253
  6. Study on the Characteristics of Ge-doped Photonic Crystal Fibers,TN253
  7. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  8. Research on the Non-sinusoidal Electromagnetic Field of Permanent Magnet Linear Synchronous Motor,TM341
  9. Analysis of Slope Stability on Account of Fluid-Structure Coupling Seepage Effect,TU43
  10. Test Proof of Studying on Space Tank’s Crack Enlargement Effects under Over-Loading,O346.1
  11. Simulation Comparative Analysis of Basalt FRP Barsreinforcing Liuhe Bridge,U445.72
  12. Design and Optimization of Electrical Motors Based on Finite Element Analysis of Temperature and Structure,TM302
  13. Key technology research and design and development of heavy duty gas turbine gearbox,TK473
  14. Flux reverse permanent magnet motor,TM351
  15. Electromagnetic Impacter Electromagnetic Analysis and Simulation,TM154
  16. Research of the Rotor System of Magnetic Suspension Wind Power Generator,TM315
  17. Modeling the Effects of Grain Orientation of Cordierite Based Glass-Ceramics on Stress Distribution by Fem,TQ174.1
  18. Simulation Study on the Preparation Method of the Large-sized Ceramic Structure,TQ174.1
  19. Study on Analytical Models and Influential Factors of Thermal Stress in Tube Sheet of Heavy Duty Heat Exchanger,TQ051.5
  20. Research on the Mathematical Model of the Crepes Machine Roller Lateral Compressive Force Based on the Finite Element Analysis,TQ330.1
  21. Microwave Synthesis and Photocatalytic Activity of One-Dimensional CeO2 Nanomaterials,TB383.1

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Photonics technology,laser technology > Optical waveguide and integrated optics > Fiber optic components
© 2012 www.DissertationTopic.Net  Mobile