Dissertation > Excellent graduate degree dissertation topics show

Design and Implementation of Automotive Can-Can Gateway

Author: KongLingWei
Tutor: LiuZhiYuan
School: Harbin Institute of Technology
Course: Control Theory and Control Engineering
Keywords: CAN-CAN Gateway Routing Latency Scheduling Algorithm OSEK/VDX SimEvents
CLC: TP273
Type: Master's thesis
Year: 2008
Downloads: 195
Quote: 1
Read: Download Dissertation


Nowadays, a large number of electronic control units (ECUs) combined in passenger-cars are distributed over a multitude of CAN systems (domains) which are connected via embedded gateway. Therefore, the gateway module has become a new challenge and highlight in automotive networks with the increase of cross-domain functionalities. In this paper, the design and implementation of the automotive CAN-CAN gateway is completely researched.Firstly, the design concept of signal-based automotive CAN-CAN gateway is presented and a related development platform based on the 16-bit micro-controller MC9S12XDP512 and the CodeWarrior complier is built. The message buffering, multi-task scheduling and store-forward signal routing are designed in the gateway. Meanwhile, scheduling algorithm, routing delay optimization and network management function are treated as the priority research areas.Secondly, the multi-task scheduling algorithm and priority configuration strategy of the gateway system is studied using the MATLAB SimEvents toolbox. Then, test and analysis of the gateway routing performance, especially with respect to delay, is given on the actual platform after the optimal design and implementation of the ID-based enquiries algorithm and multi-task scheduling using osCAN which conforms to the OSEK/VDX standard and the OSEK Network Management features are also designed and implemented.At last, the performance evaluation system which will be the reference in the development and test phases of automotive gateway is researched. The CAN node, CAN bus and CAN-CAN gateway simulation models are all studied and constructed using the MATLAB SimEvents toolbox. Based on this, a complete configurable multi-domain CAN system is simulated and researched.

Related Dissertations

  1. Analysis and research -based HTTP proxy security gateway,TP393.08
  2. Design of VoIP Gateway Based on DSP,TN916.2
  3. Research of Packet Scheduling Algorithm of the Click Modular Software,TP393.05
  4. MMS transceiver and the DIY production system design,TP311.52
  5. Research on Adaptive Grid Workflow Scheduling Based on Domain Trust Mechanism,TP311.52
  6. The Design and Realization of Verificating Hardware Platform of Smart Home System,TP273.5
  7. Train Communication Network Gateway application of real-time protocol,TN915.04
  8. P2P streaming media technology based IPTV System,TP393.02
  9. Based on technologies such as IP Telephony Voice Gateway System,TN916.2
  10. New SIP-based voice gateway system design and implementation,TN916.2
  11. SIP Trunk Gateway NAT traversal solution design and implementation,TN915.05
  12. VME -bus based high-speed trains TCN Gateway Design,TN915.852
  13. Temperature limits based on multi-core systems saving scheduling algorithm,TP332
  14. Embedded real-time operating system ARTs-OS 's EDF scheduling improvements,TP316.2
  15. Design and Implementation of Port Triggering Function on NAT Gateway,TP393.08
  16. IP-based DiffServ Scheduling Algorithm,TN915.09
  17. TD-SCDMA network access to wireless sensor network gateway technology,TP212.9
  18. Based Heterogeneous Embedded Gateway Protocol Design and Implementation,TP273
  19. Wireless sensor networks based on power transformer temperature monitoring system,TP212.9;TN929.5
  20. Interval for design and implementation of IEC61850 Gateway,TM63

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Automatic control,automatic control system
© 2012 www.DissertationTopic.Net  Mobile