Dissertation > Excellent graduate degree dissertation topics show

Testing and Researching on Weft-Knitted Fabric under Biaxial Tensile

Author: HongWeiYa
Tutor: LongHaiRu
School: Donghua University
Course: Textile Engineering
Keywords: biaxial extension weft-knitted fabric mechanical property
CLC: TS101.923.1
Type: Master's thesis
Year: 2010
Downloads: 93
Quote: 2
Read: Download Dissertation

Abstract


The tensile fracture mode of the knitted-fabric was complicated during the actual application. It contained simultaneous tensile modes in different directions. And the tensile rate and tensile strength were also different. The tensile deformation has changed great. For the application limit of the instrument, there was rare research in the biaxial tensile of weft-knitted fabric in china. The domestic tensile testing usually tested under uniaxial tensile mode. The foreign research was based on the geometric mode of the weft plain knitted fabric or rib knitted fabric in the initial states. And the tensile testing mode was single. This paper was to research the biaxial tensile properties of different weft-knitted fabric under various experimental conditions. The law of the biaxial tensile properties with the weft-knitted fabric was discussed under different tensile conditions and with different fabric structures. It provided basics for the comprehensive assessment of the difficult degree of the fabric that fractured under extremely complicated conditions.First, the rib-knitted fabrics with different stitch density have been designed and knitted. The fabrics were pre-treated by alkaline-oxygen-cooking-bleaching one-bath processing to make them suitable for the usual application.Second, the mechanical properties of weft-knitted fabric under biaxial tensile have been researched. The breaking strength, breaking extension, stretch modulus and work of rupture of rib-knitted fabric with 7 directions were tested on a domestic X-Y electronic strength tester. Some factors influencing the mechanical properties were analyzed. And it’s found that there were the relations of trigonometric function between tensile properties and loading directions.Third, the mechanical properties of weft-knitted fabric under different extension rate have been researched. The tensile fracture mode involves fixed one edge then moved the opposite clamps that gripping the fabric or moved all the 4 clamps that gripping the 4 edges of the fabric. When moved all the clamps, the extension rate of the opposite clamps could be the same or the different. The trends of the extension rate influenced mechanical properties of weft-knitted fabric under biaxial tensile have been attained.And then, the behavior of the weft-knitted with different fabric construction and stitch density under biaxial tensile have been studied. The relative breaking strength, breaking extension, stretch modulus and specific work of rupture of tested weft-knitted fabric have been tested, calculated and analysed. The trends of the fabric construction and stitch density that influenced the mechanical properties of weft-knitted fabric under biaxial tensile have been attained.At last, the processing and mechanism of the weft-knitted fabric under biaxial tensile have been analysed. And the limitations during the testing have also been indicated

Related Dissertations

  1. Study on the Synthesis and Properties of Copolyimides Derived from ODPA/Isomeric ODA,TQ323.7
  2. Properties on Aramid 1313 Fabric and the Compound Silastic Rubber Composite Material with This Fabric,TB332
  3. Study on the Mg-Si Alloys Prepared with the Fine Si Powders as the Raw Material,TG339
  4. Microstructure and Property of Friction Stir Welding Jiont for High Strength Aluminumalloy Under Controlled Cooling Condition,TG407
  5. Mechanical Property Analysis on Working Equipment of Hydraulic Excavator,TU621
  6. First-Principles Study on the Properties of δ and γ" Phases and the Recrystallization Behavior of Cold Rolled INCONEL 718 Super-Alloy,TG111.7
  7. Study on Hot Rolling Process of AZ61 Magnesium Alloy,TG339
  8. Mg-2Nd-0.2Zn-0.4Zr-xY magnesium alloy microstructure and mechanical properties of the study,TG146.22
  9. Structure Design and Synthesis of High Properties ABS Resin,TQ325.2
  10. After rolling of high - quality hard-wired control microstructural evolution and mechanical properties of cold process,TG142.1
  11. Effect of ECAP on Microstructure and Mechanical Properties of Solid-State Recycled AZ91 Chips,TG146.22
  12. Detection of Structure and Parameters of Single Weft Knitted Fabrics Based Image Processing,TP391.41
  13. Three-dimensional Simulation and Deformation Realization of Weft Loop,TS184.13
  14. Preparation of Polypropylene Engineering Mandrel Pipe and Its Structure and Properties,TQ325.14
  15. The Mechanical Properties and Corrosion Resistence of AlN-SiC Ceramic Composites,TQ174.1
  16. The Study on High Flowing PVC Based Alloy by Injection Moulding,TQ325.3
  17. Research on Microstructure and Mechanical property of 4032 Aluminum Alloy Scroll,TG319
  18. Properties and Ultrasonic Grinding Experimental Study on the Nano Ceramics Toughened by ZrO2,TG580.6
  19. High-energy high - intensity emission drug long storage stability,TQ562
  20. Research on Effects of Heat Treatment on the Microstructure and Properties of X80 Pipeline Steel,TG161

CLC: > Industrial Technology > Light industry,handicrafts > Textile industry,dyeing and finishing industry > General issues > Basic science > Quality management and quality control > Test > Fabric performance test > Fabric mechanical properties, physical properties
© 2012 www.DissertationTopic.Net  Mobile