Dissertation > Excellent graduate degree dissertation topics show

Studies of Wear Behaviors and Wear Mechanisms of 45 Steel

Author: WangYang
Tutor: WangShuQi
School: Jiangsu University
Course: Iron and steel metallurgy
Keywords: 45 steel Wear resistance Microstructure Wear mechamsm Experimental condition
CLC: TG115.58
Type: Master's thesis
Year: 2010
Downloads: 149
Quote: 2
Read: Download Dissertation

Abstract


The effects of tempering temperatures and operation conditions on the wear resistance of 45 steel were studied. The morphology, composition, and structure of worn surfaces were examined and analyzed using SEM, EDS and XRD. The wear mechanism was discussed. This is of an important academic significance to the research of oxidative wear.The results show that the effect of microstructure on the wear loss depended on the load. Under a low load of 50 - 100 N, there was not apparent influence of microstructure on wear loss. With increasing the load, the microstructures markedly affected wear loss. The wear loss increased with increasing tempering temperature and reducing hardness. The ambient temperature also had apparent influence on wear loss. The wear losses at room temperature and 200℃approached each other, but they are markedly lower than those at 400℃. There are three types of wear mechanisms under the following conditions in 45 steel. Abrasive wear prevailed at room temperature and under a load of 50 N at 200℃. Oxidation wear prevailed under 100 - 150 N at 200℃as well as under 50 - 100 N at 400℃. The oxides are composed of Fe3O4, a small amount of Fe2O3 and FeO. The wear debris included the mixture of Fe, Fe3O4, Fe2O3 and FeO. Plastic extrusion prevailed under 150 N at 400℃.

Related Dissertations

  1. Reactive Hot-Pressing and Mechanical Properties of （ZrB2-ZrO2）/BN Composites,TB332
  2. Microstructure and Mechanical Properties of Mg-Zn-Y-Zr Alloys,TG146.22
  3. Investigation on Microstructure and Properties of Cadmium-Free Silver-Based Intermediate Temperature Filler Metals,TG425.2
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. The Investigations on the Characteristics and Mechanism of NIR Emission from Bi-doped Silicophosphate Glasses,TQ171.1
  6. Research and Development of Wear Resistance for Physically Disabled Men Jackets,TS941.2
  7. Preliminary Study on Salt-Tolerant Mechanism of the New Pennisetum Purpereum Schumach Variety-Sumu No.2,S543.9
  8. Study on the Fine Structure of Intestine and Intestinal Mucosal Barrier in Zebrfish (Brachydanio Rerio),Q95-33
  9. Study on Characteristics of Morphology Anatomy and Physio-Biochemistry of Two Ecotype Varieties Cucumber Leggy Seedilings,S642.2
  10. Study on the Mechanism of Heat-Induced Gelation of Myofibrillar Proteins,TS251.1
  11. Studies on the Aggregation and Microstructure of Imidazolium Ionic Liquids in Solutions,O645.1
  12. Studies of Luminescence Characteristics of Eu3+-doped Rare Earth Borates REBaB9O16 （RE=rare Earth Ions and Y）,O627.3
  13. The Research on Extrusion Parameters Through the Plate Billet of Magnesium Alloy,TG379
  14. Study on Microstructure and Superconducting Properties of MgB2 Wires Fabricated by Two-Step PIT,TM26
  15. Study on Morphological Evolution and Toughening Mechanism of Sandbag Microstructure-toughened PA6/EPDM-M/nano-CaCO3 Ternary Composites,TB33
  16. The Photoluminescence of H1.77 [Sr0.8 Bi0.21Ta2 O7] Nano-layers Annealing under Different Temperatures and the Effect of the Cu2O Addition on Its Photocatalytic Activity,O482.31
  17. Compressive Strengthes and Microstructural Characteristics of Fiber Reinforced Geopolymer,TB321
  18. Study on Influence of Preferred Orientation on Mechanical and Recoverable Properties of TN479 Shape Memory Alloy Sheet,TG139.6
  19. Study on DC Casting of Aluminum Alloy under the Dual-frequency Electromagnetic Fields,TG292
  20. Low-Frequency Magnetic Pulsing Effect as Well as EET Study of Amorphous Alloy Fe43Co43Hf7B6Cu1,TG139.8
  21. Study on Electromagnetic Roll-Casting and Succeed Rolling of AZ61 Magnesium Alloy,TG339

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Metallurgy ( Physical Metallurgy ) > Analytical tests of the metal (Metal Testing and Materials ) > Mechanical properties ( mechanical properties ) test > Friction and wear test
© 2012 www.DissertationTopic.Net  Mobile