Dissertation > Excellent graduate degree dissertation topics show

Study on Low-speed High-torque PMSM and Its Control System for Direct Drive Oil Pumping Unit

Author: WangShuai
Tutor: ZhangBingYi；FengGuiHong
School: Shenyang University of Technology
Course: Motor and electrical
Keywords: Low-speed High-torque PMSM Direct Drive Windlass Balance
CLC: TM351
Type: Master's thesis
Year: 2010
Downloads: 451
Quote: 1
Read: Download Dissertation

Abstract


Petroleum is one of the most important energy of human. Now, our domestic oil fields have go to the meta or later period, the characteristic of the well in our country is low liquid level deep well, viscous crude wells. Most of the pumping units have the characteristic of poor performance transmission efficiency, energy-intensive, and the motor power factor is low. They can not satisfy the need of the wells. But the control system could not resolve this contradiction. Therefore, only use direct drive structure and low-speed high-torque PMSM could significantly improve the transmission efficiency of pumping system and energy saving.The paper discusses the characteristic and design method of low speed and high torque PMSM considering driving requirement of the oil extraction system. The cause of producing pulsatile torque is analyzed, and some measures for weakening pulsatile torque are analyzed, which includes fractional slot winding, reasonable pole arc coefficient and skew stator slot. The distribution of magnetic field, waveform of magnetic filed density and pulsatile torque are caculated and simulated. These results can validate the rationality of magnetic filed pathway. The experimental results are analyzed, and these results are used to show that the method brought forward by this paper to design low speed and high torque PMSM is effective.By analyzing the actual working conditions and characteristics of direct drive structure, the control system of low-speed high-torque PMSM is designed. In order to replace PLC and other control components, the control system use programmable high performance converter. Through the test, the control system has been optimized and applied to the full balanced pumping unit.From the analysis of the direct drive screw pump unit and the techniques of oil extraction, the theory of senseless vector control is adopted. This system abort reducing mechanical and strap decelerator and increasing the reversal braking setups,which can realize functions of electrification stopping,power-off brake. Finally, the prototype and control system are installed and debugged. The low energy consumption, long stroke and low the frequency of stroke are realized. The system improves the driving efficiency by introducing a low-speed and high-torque PMSM. The result has proved that the control project is feasible and effective to extract oil effectual and scientifically, decrease energy consumption, achieve energy-saving emission reduction goals.

Related Dissertations

  1. Study on Drive and Control System of Five-Phase PMSM Based on FPGA,TM341
  2. Initial Rotor Position Estimation for PMSM,TM341
  3. Grid-Side Converter Control and Wind Turbine Emulator in Direct Drive Wind Power System,TM46
  4. Analysis and Control of 6-DOF Electrical Driven Parallel Manipulator,TP242.2
  5. Design of Servo-Control System of PMSM Based on IRMCK201,TM341
  6. Control System Design for Position Sensorless Permanent Magnet Synchronous Motor,TM341
  7. FPGA-based motion control system design,TM341
  8. Research on Vector Control System of PMSM Based on Sliding Mode Controller,TM341
  9. Design and Implementation on Drive Control System of Industrial Sewing Machine,TP273
  10. Investigation on the Anti-disturbance Control of Permanent Magnetic Synchronous Motor,TM341
  11. Design of Inverter Control System for Low Speed and High Torque Compound PMSM,TM341
  12. Permanent magnet synchronous traction motor design analysis and Simulation Platform,TM341
  13. The Research on Low Voltage Ride Through for Wind Power Generation System,TM614
  14. Direct-drive A / C -axis milling head double pendulum angle structural analysis and performance testing,TG547
  15. Direct drive washing machine drum drive control system design and implementation,TM925.33
  16. Pitch Control Servo System in Mega-watt Class Wind Turbine,TM315
  17. Flatbed multi-motor drive with traction control study,U464.142.1
  18. Research of Control Strategy of a New Type of Electro-hydraulic Actuator Based on Servo Direct Drive,TH137
  19. Simulation analysis of permanent magnet synchronous motor power factor,TM341
  20. Research of Intelligent PID Control Method in Permanent Magnet Servo System,TM921.541
  21. The Research of Current-Loop Bandwith Expanding Technology for AC-Pmsm Servo System,TM921.541

CLC: > Industrial Technology > Electrotechnical > Motor > A special motor > Permanent magnet motor
© 2012 www.DissertationTopic.Net  Mobile