Dissertation > Excellent graduate degree dissertation topics show

Effect of Time on Shear Bond Strength of Orthodontic Brackets with Different Base Condition

Author: WangNing
Tutor: PanShuQin
School: Shandong University
Course: Journal of Orthodontics
Keywords: Bracket Bonding Bond strengths ARI
CLC: R783.5
Type: Master's thesis
Year: 2010
Downloads: 59
Quote: 1
Read: Download Dissertation

Abstract


Objective:In the daily orthodontic practice, the bonding of orthodontic brackets to enamel is very important, which is a multi-step process. The objective of this test is to evaluate the shear bond strengths (SBS) of different bracket base conditions at different debond times of 5,10,15,30, and 60 minutes and 24 hours.Materials and Methods:Metallic brackets:standard straight wire bracket spherical mesh base (tianmei company, Changsha) and standard straight wire bracket etching base (tianmei company, Changsha). Adhesive resin:orthodontic non-tone-based chemical curing adhesive mixing (3M, the USA).Experiment in vitro:One hundred twenty youth extracted maxillary first premolars were randomly divided into 12 groups (10 per group). In group A1～group A6, standard straight wire bracket spherical mesh base was used:in group B1～group B6, standard straight wire bracket etching base was used. The brackets were bonded to human premolars according to the instructions of adhesive for use. The specimens were stored in artificial saliva at 37℃two minutes later after bonded. The shear bond test of group A1 and B1, group A2 and B2, group A3 and B3, group A4 and B4, group A5 and B5, group A6 and B6 was performed at different debond times of 5,10,15,30, and 60 minutes and 24 hours. Two-way analysis of variance was used to obtain the significant differences among different base conditionsand debond times and their interactions. The chi-squared test was also used to determine significant differences for the ARI scores among the groups (P< 0.05). The enamel surfaces were evaluated according to the adhesive remnant index (ARI) after debonding. The ARI scale has a range from 0 to 3, with 0 indicating no composite left on the enamel; 1, less than half of the composite left; 2, more than half of the composite left; 3, all composite left on the tooth surface. Scanning electronic microscope was used to test the differences between the samples.Results:Lowest shear bond strength was attained with a debond time of 5 minutes for the group A (9.12 MPa) and the group B (8.18 MPa). Highest shear bond strength was obtained with a debond time of 24 hours for the group A (17.32 MPa) and the group B (14.94 MPa). The shear bond strength increased with the bonding time,but statistically significant differences between the groups were not observed for debond times of 5,10,15,30, or 60 minutes.However, the shear bond strength values obtained at 24 hours were significantly different (P<0.001). After adhesive bonding, the difference of the ARI scores between groups A and groups B was not significant. (P> 0.05).4) Before and after adhesive bonding, the scanning electron microscope morphologies of the two brackets’bottoms were significantly different.Conclusion:1 Both the two metal brackets are to meet the clinical needs.2 It is reliable to load the bracket 5 minutes after bonding using 3M UniteTM.3 The factor of bracket base design has significant influence on bracket’s bond strength. Metallic bracket with spherical mesh base is more suitable for clinical needs.

Related Dissertations

  1. Studies on the Aggregation and Microstructure of Imidazolium Ionic Liquids in Solutions,O645.1
  2. Study on Repairing Material of Cement Concrete Pavement Which Based on Slag,U414
  3. Effect of Various Surface Treatments on the Shear Strength of Orthodontic Brackets in Dental Fluorosis Fixation,R783.5
  4. Effect of Different Means for Tooth Surface Polishing on Rebond Shear Bond Strength of Orthodontic Brackets,R783.5
  5. Study on the Modification and Antisepsis Capability of Soy Based Adhesive,TQ432.73
  6. Histidine, triphenylbenzene Derivatives and Their Gelling Property,O621.3
  7. Effects of γ-RAY Irradiation on Indigenous Aramid Fiber and Its Composite Interface Performance,TB332
  8. Preparation of Composite Coating on Titanium Alloy Substrate and Microwave Absorption Properties,TG174.4
  9. Ti/Al Multilayers Diffusion Bonding γ-TiAl Based Alloy,TG146.23
  10. Research on Pinus Massoniana for Wood Composite Flooring,TS653
  11. Study on Optimization of Brief Solid Wooden Chair Based on Group Technology,TS665.4
  12. A Proof of a formality on Generalized K(?)hler Manifolds,O186.12
  13. The Synthesize Analysis of Weak Interactions Between Molecular Motor and Tubulin Protein,Q51
  14. Discusses the Friendship Behavior,D913
  15. On Stuart Hall’s Theory of Articulation,G0
  16. During a pandemic influenza prevalence of acute respiratory infections , attitudes, knowledge and behaviors,R193
  17. The Experimental Study on Relationship between Adhesive Strength of Hydroxyapatite (HA) Coating and Biomechanics Behavior of HA-coated Prosthesis,R687.4
  18. Effect of Treatment by Electro-spark Deposition Technology on Bonding Strength of Porcelain and Pure Titanium,R783.1
  19. The Study of Bond Strength Between Core and Veneer Porcelain of All -ceramic Restorations,R783
  20. The Bracket Stress Calculation Model of the Great Volume 0# Block Constructs and the Monitoring Engineering Research at Different Times,U445.4
  21. Design and Research of the Bridge Jiubao on Construciton in Hangzhou,U448.18

CLC: > Medicine, health > Oral Sciences > Oral orthotics > Journal of Orthodontics
© 2012 www.DissertationTopic.Net  Mobile