Dissertation > Excellent graduate degree dissertation topics show

Research on Low-Temperature Radiation Ground Heating Temperature Controller

Author: WuLei
Tutor: CaiManJun
School: Yanshan University
Course: Control Theory and Control Engineering
Keywords: Low-temperature water radiant floor heating Temperature control Single chip Fuzzy-PID Parameters self-turning Fuzzy prediction control
CLC: TP273.5
Type: Master's thesis
Year: 2010
Downloads: 166
Quote: 1
Read: Download Dissertation

Abstract


Along with the rapid development of the national economy and the improvement of modern living standards, low-temperature water radiant floor heating technology is widely promoted and has become the preferred method of heating system. As the key factor of low-temperature water radiant floor heating system, temperature control has become the study focus in HVAC industry.This paper chooses fuzzy predictive control and Fuzzy-PID as the research topic, which has crucial significance in theory and practical field, conducts research upon the theory study of low-temperature radiant floor heating system and the control theory, and complete the design task of the low-temperature radiant floor heating temperature controller and experiments.First, according to the basic heating transfer principle and the floor radiator structure which used for low-temperature radiant floor heating experiment, a simplified dynamic mathematical model has been put forward. And the temperature distribution of rooms in different conditions and the regular indoor temperature changes has been concluded in the MATLAB simulation which differs in several conditions with different property parameters.Second, to solve the problem that numeric PID control is difficult to adapt the dynamic changes of nonlinear systems, and the bad dynamic performance of the system in which the numeric PID control has been applied, this paper conduct research upon self-tuning PID-type fuzzy control method. With the adjustment of the three parameters in self-tuning PID-type fuzzy control method, the shortcomings which traditional numeric PID can not resolve have been overcome. In addition, this paper also inquiry another method, which has limited the use of T-S models to input non-linear, time-delay system modeling is proposed predictive fuzzy control, input constraints into the form of linear matrix inequalities. Simulation results show that the method is effective.Finally, freescale single-chip has been selected as the control unit to design a low-temperature radiant floor heating temperature controller, to which the Fuzzy-PID control algorithm has been applied. In the following low-temperature water radiant floor heating experiment, the temperature controller gave out a good performance, such as better control precision, dynamic performance and stability because of the applied Fuzzy-PID algorithm and the selected Freescal single chip.

Related Dissertations

  1. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  2. Research on Temprature Controling Technology of Laser Diode with Thermoelectric Cooler,TN248.4
  3. Research on Temperature Control System for Laser Diode,TP273
  4. Research on Temperature Control System for High-Performance Oven-Control Crystal Oscillator (OCXO),TN752
  5. Multilayer coextrusion drooling forming process temperature control technology,TQ320.721
  6. The Optimization Design and Research to Wet Coal Dryer Mechinery Control System,TP273
  7. Design of Fuzzy PID Controller Based on FPGA,TP273.4
  8. Research and Design of the Remote Monitoring System of Obturation in Underground Coal Mine,TD76
  9. Research on Modification and Application of Particle Swarm Optimization Algorithm Based on Control Methods,TP301.6
  10. Application of PID Control in Networked Control System,TP273
  11. The Research of Die Casting Machine’s Real-time Control System Based on ARM,TP273
  12. Research on Hydraulic Synchronization Control of Four-cylinder Systems for Sector Section of Continuous Casting,TF341.6
  13. Research on Control of the 3DOF Hover,V249.1
  14. Design of Signal Generator System Based on SCM,TP368.1
  15. Optimization Research on Parts of Thermal Process Control System in Anshan Iron and Steel Group Corporation’s Second Power Plant,TM621.6
  16. The Research of Large Wind Turbine Blade Pitch Control Technology,TM315
  17. Research of Thrust Hydraulic System of Earth Pressure Balance Shield Machine,U455.39
  18. Oil-heater Temperature Control System Based on Neural Network,TK175
  19. The Fuzzy Temperature Control System of Sintering Furnace Based on OPC Technology,TP273
  20. Research of the Temperature Fuzzy-PID Control Algorithm and Design the Control System of Well Type Resistance Furnace,TP273
  21. The Control System of Fused Deposition Modeling System Based on ARM Cortex,TP273

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Automatic control,automatic control system > Computer control, computer control system
© 2012 www.DissertationTopic.Net  Mobile