Dissertation > Excellent graduate degree dissertation topics show

High-speed data acquisition , processing and transmission system design

Author: SuiChengHao
Tutor: JiangLiPing
School: Nanjing University of Technology and Engineering
Course: Communication and Information System
Keywords: High-speed data acquisition Down-conversion DSP Ethernet Transmission with network interface
CLC: TP274.2
Type: Master's thesis
Year: 2010
Downloads: 275
Quote: 1
Read: Download Dissertation

Abstract


The technology of high-speed data acquisition is widely used in many fields, such as communications, aerospace, radar, and so on. With the development of software radio, communication and image acquisition technology, higher and higher acquisition speed and precision are recommended. Besides, the acquisition device of being portable, networked and intelligent, and the stability and reliability of transmitting the acquired signal to the computer to be displayed and processed are preferred.At the same time, the Ethernet protocol has become the most widely used communication protocol standards in current local area network. In the domain of embedded applications, the Ethernet protocol combined with the data acquisition system, to form LAN, to achieve a reliable data transmission and control, is the current hotspot.This paper describes a design approach of a high-speed data acquisition, processing and transmission system. The system is designed to receive the communication signal range of 275MHz～475MHz. The received signal is sampled with 500Msps high-speed by ADC chip. In FPGA, the frequency band in which there possibly be signal of interest is divided into multiple channels, and down-conversion is done in turn to the channel after the deceleration has been completed. The down-converted signal was measured for carrier frequency, recognized for the modulation type and demodulated in DSP. In this way, the carrier frequency, modulation type and other information of the signal could be obtained. The TCP/IP protocol is embedded into DSP, and the state machine is used to realize the connection and disconnection of the protocol.DSP is employed to control the network chip ENC28J60 to send information or part of the demodulated data of the signal to the computer via the network cable.

Related Dissertations

  1. Design of Electronicalcontrol System for Electronic Jacquard Knitting Machine,TS183
  2. Research on the Integrated Grating Subdividing Digital Display Device Based on DSP,TH822
  3. Study on Two Dimensional of Auto-Collimator Based on DSP,TH741.14
  4. Study on the Control System for Automatic Aiming of HWIL Pitching Mechanism,TJ303
  5. Research on Synchronous Motor Excitation Control System,TM341
  6. The AES Algorithm and Its Implementation in DSP,TN918.1
  7. The Design of a DSP-Based Robot Speech Command Recgnition System,TN912.34
  8. Optimizing and Realising Research on Vedio Compression in TV Guidance System,TN919.81
  9. Research on Image Compression and Implementation Using TMS320C6713 Based on SPIHT Algorithm,TP391.41
  10. Research and Realization of Precision Clock Synchronization Protocol,TP393.11
  11. The Design of the Dual-Camera High-Speed Synchronous Capturing System Based on Gigabit Ethernet,TP274.2
  12. Study on Ethernet MAC Protocol and Its FPGA Implementation,TP393.04
  13. Study on Application of Solar Energy Street Lamp Intelligent Controller,TM923.5
  14. Hybrid Stepping Motor Servo System Based on DSP,TM383.6
  15. Research of QoS Optimization Based on Neural Network Prediction for Ethernet Passive Optical Network,TN929.1
  16. Design and Implementation of High Speed Data Acquisition System for Radar Altimeter Echo Wave,TP274.2
  17. Key Technologies Research Based on the E1 Transmission Multiplexer Network Bridge Switchs,TN915.05
  18. Design and Validation of Specialized Computer under Complex Circums-tances,TP368.3
  19. High-speed Train Detection Technology between Pantograph and Catenary Current Collection Based on Traction System,TM922.5
  20. Research on Sensorless Control of New DCM,TM33
  21. Research and Design of Digital Down Conversion in Software Radio Systems,TN925

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Data processing, data processing system > Data collection and processing systems
© 2012 www.DissertationTopic.Net  Mobile