Dissertation > Excellent graduate degree dissertation topics show

Based on TS fuzzy control theory of network congestion control algorithm

Author: LiBin
Tutor: SunJinSheng
School: Nanjing University of Technology and Engineering
Course: Control Theory and Control Engineering
Keywords: Network Congestion Control Active Queue Management T-S Fuzzy Model State Feedback Control Neuron PID Control
CLC: TP393.06
Type: Master's thesis
Year: 2010
Downloads: 102
Quote: 3
Read: Download Dissertation

Abstract


With the rapid development of the computer network,soaring increase of the Internet users and constant appearance of the new network applications,have brought a series of problems to the network’s normal operation,one of the most serious problem is network congestion.When the network congestion occurs,it will lead to the network throughput’s decrease,the delay’s increase and the packet loss’s increase, seriously even cause network collapse.Therefore,in order to prevent and control the network congestion,we need to design the effective network congestion control algorithm. Currently,the network congestion control algorithm is the important means for improving the network’s performance, ensuring the network’s stable operation and enhancing the network’s QoS(Quality of service).In recent years,experts and scholars have achieved lots of achievement in the field of network congestion control algorithm’s research.Due to the end-to-end TCP congestion control has certain limitation,Active Queue Management(AQM)algorithm has become the current research hotspot in the network congestion control’s field.This article mainly researches the network congestion from the aspect of AQM algorithm. The main research results are as follows:(1) An AQM algorithm is proposed based on T-S(Takagi-Sugeno)fuzzy model. For the nonlinear model of the network congestion control system, the T-S fuzzy model of the congestion control system is established for using T-S fuzzy model’s feature which can approximate nonlinear systems very well,and the state feedback AQM control algorithm is designed, the conditions of the system’s stability are given,and the design method of the AQM controller’s parameters is given by using LMI(Linear Matrix Inequality) techology. Simulation results show that this algorithm can maintain the queue length around the given target,has good stability and robustness. Comparison with other AQM schemes, such as PI,REM and ARED,has demostrated the superiority of this algorithm in convergence rate, stability, robustness and the fluctuation of queue length.(2) A single neuron adaptive PID control algorithm is designed based on T-S fuzzy model.Through introducing the T-S fuzzy model to adjust the neuron’s gain,the single neuron adaptive PID control algorithm has the fuction that the gain can auto-tune. Simulation results show that,comparison with the improving single neuron adaptive PID control algorithm,this algorithm has better convergence,can achieve faster convergence to target queue length,and shows a better stability, robustness and smaller steady-state error.

Related Dissertations

  1. Single Neuron PID Control for Electro-Hydraulic Servo Unit of Ship Rudder,U666.152
  2. Research on Text Classification Based on Biomimetic Pattern Recongnition,TP391.1
  3. Research of Predictive Control in Water Treatment Plant Based on Neuron Network,TP273.1
  4. Research on Ducted Fan Unmanned Vehicle Autonomous Modeling and Control Strategies,V249.122
  5. Research on the Control and Remedy of Nanopositioning Stage Drived by Piezo Material Lead Zirconate Titanate,TP273
  6. Fault Diagnosis Research on Three-Tank System,TP277
  7. Design the Control System of Ocean Wave’s Simulation Table Based on Theory of Fuzzy Turning PID,TP273.4
  8. The Clinical Value of Detection of Serum TPS, CEA, CYFRA21-1, NSE for Diagnosis in Patients with Lung Cancer,R734.2
  9. Multilayer coextrusion drooling forming process temperature control technology,TQ320.721
  10. The Research and Application of Modified Algorithms About Fuzzy Predictive Functional Control,TP273
  11. Study on Industrial Boiler Water Level Control System,TP273
  12. The Research of Mobile Machine Vision Navigation and Obstacle Avoidance System,TP242
  13. The Vibration Synchronization and the Control of Amplitude in Sharp Resonance Vibration Machine,TB535
  14. Automotive the starter performance of high-precision high stability of the test method and application,U467
  15. Researches on the Application of the Neuron-MOS in the Neural Network,TP183
  16. Research of Control Strategy Based on the Electro-hydraulic Proportional Position Control System,TH137.52
  17. Research on Machine Vision High-speed Positioning System Based on Linear Motor,TM33
  18. Reseach and Design of Servo Control System for Vehicle-borne Mobile Satellite Communication System,TN927.21
  19. Modeling and Control of AirBall System,TP391.9
  20. The Research and Application of PID Parameters Self-tuning,TP273
  21. Research on the Quality of Service Technology in IP Network,TN915.09

CLC: > Industrial Technology > Automation technology,computer technology > Computing technology,computer technology > Computer applications > Computer network > General issues > Computer networks, test , run
© 2012 www.DissertationTopic.Net  Mobile