Dissertation > Excellent graduate degree dissertation topics show

The Study of Measurement of LED Junction Temperature

Author: WenHuaiJiang
Tutor: MouTongSheng
School: Zhejiang University
Course: Measuring Technology and Instrument
Keywords: LED junction temperature noise pulse measurement thermal capacity
CLC: TN312.8
Type: Master's thesis
Year: 2010
Downloads: 491
Quote: 9
Read: Download Dissertation

Abstract


LED meets the requirements of low-carbon economy because of their high energy saving efficiency, long life-time and high reliability, and it is widely used in many fields especially the fields of semiconductor lighting. However, the test of thermal performance and heat dissipation is still a prominent problem. In order to obtain stable light output and maintain normal lifetime of the devices, how to keep the junction temperature within the allowable range? This is still a burning question at present.On the basis of making enough investigation on the measuring methods of LED junction temperature, this text mainly studies the K coefficient measuring method which can reduce the measurement noise and the effect. Meanwhile, it also studies a new method - the pulse current method which can measure the junction temperature and thermal capacity of LED device at the same time. By injecting constant narrow pulse of square-wave current to the LED devices, it will obtain the sensitivity coefficient dVF/dT of forward voltage and the temperature under a certain current. Then, by measuring the forward junction voltage under the rated current, users can use the sensitivity coefficient to obtain the junction temperature. Through the study of 12μs , 24μs and 50μs and other pulses whit different pulse width, it is concluded that in order to achieve the effect of pulse current on junction temperature measuring accuracy lower than 1℃, the pulse width should be controlled from a few to a dozenμs. This text also makes primary exploration of the pulse current method on the thermal capacity measurement of LED devices.Based on the experimental demonstration, this text offers a prototype structure of LED junction temperature measuring instruments with pulse current method. Hope it will contribute to the measurement of LED junction temperature.

Related Dissertations

  1. Design of Servo Control System with Linear Motor Based on Digital Filter Technology,TM359.4
  2. Packet Loss Recovering Technology for Speech Transmission over Network,TN912.3
  3. Research and Implementation on Content-Based Clothing Image Retrieval,TP391.41
  4. Moving target trajectory analysis based Intelligent Traffic Monitoring System,TP277
  5. The surface geometry noise removal of non- local variational model,TP391.41
  6. Design and Optimization of the Audio DAC Digital Path,TN713
  7. DBF microwave system design and implementation phase locked source,TN911.8
  8. Asphalt Mixture Design of Noise Reduction Enviroment-friendly Tunnel Pavement,U414
  9. The Stability of One-Dimensional Stochastic Differential Equations,O211.63
  10. Research on Servo Control System of Gyro-Stabilized Platform,TJ765
  11. Study on the Design Parameters and Noise-reduced Performance of the Open Graded Asphalt Friction Course (OGFC),U414
  12. Study on the Tire Road Noise Characteristics of Intermittent Graded Asphalt Mixture,U461.51
  13. The Design and Application of Wind Turbine Airfoil Considering the Aerodyamic Noise,TK83
  14. The Research of Spectrum Analysis Methods in Phase Noise Measurement Technology,TM937.4
  15. Weak laser power detection methods and technology research,TM933.3
  16. Study of Model Predictive Control Methods Based on Subspace Identification,O231
  17. Chaotic sequence denoising and synchronization of nonlinear systems,TN911.7
  18. High-frequency soft magnetic thin films and its electromagnetic noise suppression performance applied research,TB43
  19. Theoretical and Experimental Research on 1.06μm Yb3+-doped Phosphate Fiber Laser,TN248
  20. Study on the Technique of Spaceborne Radar Jamming and Simulation,TN974
  21. Analysis and Processing on Shallow Channel Echo Signal of Subsurface Ground Penetrating Radar,TN957.51

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Semiconductor technology > Semiconductor diode > Diodes: structure and performance > Light-emitting diodes
© 2012 www.DissertationTopic.Net  Mobile