Dissertation > Excellent graduate degree dissertation topics show

The Research of Dual-Beam Laser Welding

Author: ZhuJiaJia
Tutor: ZhangQiuE
School: Changchun University of Science and Technology
Course: Optics
Keywords: laser precise processing different-types materials welding dual-beam laser powder-cladding welding
CLC: TN249
Type: Master's thesis
Year: 2010
Downloads: 139
Quote: 0
Read: Download Dissertation

Abstract


The laser has been used in precise processing area more and more widely due to its tiny focus point ,high power density and small heat-affected zone for materials welding. The goal of this paper is to achieve conection between micron sized bridge wire (NiCr alloy wire) and millimeter sized plug in detonator,but these two workpiece have different thermal physical parameters and the size difference is about three orders of magnitude,so there is a problem of different-types materials welding which makes the welding not easy to achieve. Baesed on physical principle of laser interactions with materials and heat transfer theory of laser welding, the paper has provides dual-beam laser powder-cladding welding technique, design dual-beam laser welding system and make a detailed analysis of the alloy powder properties and the wettability of welding beads. Based on lots of welding experiments, the experiments have selected and optimized the welding parameters such as laser pulse energy, pulse width , focus points spacing and so on. The paper has achieved the welding between micron sized metal wire and large workpiece which has a certain value in the laser precise processing area.

Related Dissertations

  1. Research and Design for the Laser’s Power Control System of Laser Direct Writing,TN249
  2. Several Key Issues on Closed-Loop Control for Precision Laser Tracking Device,TN249
  3. Research on Signal Receiving System of Phase Laser Range Finder,TN249
  4. Study on High Power Nd:YAG Laser Scanning Galvanometer System,TN249
  5. A Study on UV Laser Micro-machining Single-crystal Silicon,TN249
  6. Research on Galvanometer Scanning Laser Welding System,TN249
  7. Precision machining technology based on femtosecond deep hole machining of metal film,TN249
  8. The Design and Implementation of Laser Array Aerial Effects,TN249
  9. Pulsed laser ablation mechanism of propulsion impulse occurs,TN249
  10. Study on the Target-In-the-Loop Adaptive Optics Systems,TN249
  11. Research on the Irradiation Effects of Insb Detectors under Sub-band CW Laser,TN249
  12. An Investigation in Surface Morphology, Component and Pulp Chamber Temperature of Dentin Irradiated with Erbium Laser,TN249
  13. Characteristics and Experiment Study on Residual Stress Induced by Controlled Laser Peening,TN249
  14. Study on Statistical Optimization for Strengthening Effect of Laser Shot Peening,TN249
  15. Evaluation of Films Creep Deformation Property by Laser Thermal Stress Method and Simulation of Finite Element,TN249
  16. Research on the Fatigue Behavior of Magnesium Alloy Treated by Laser Shot Peening Based on Numerical Analysis and Experiment,TN249
  17. The Processing of Massive Laser Scan Measurement Date,TN249
  18. Spectroscopy of laser-induced dissociation and its quantitative research,TN249
  19. Development of the Distance Detection System on Laser Cutting Head and the Workpiece,TN249
  20. The Micro Motor Speed Measuring System Based on Laser-Doppler Effect,TN249
  21. Research of Digital Controlled 3D Laser Processing System,TN249

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Photonics technology,laser technology > Laser technology, the maser > Laser applications
© 2012 www.DissertationTopic.Net  Mobile