Dissertation > Excellent graduate degree dissertation topics show

Study on Metal Welds of Infrared Non-destructive Testing Technology

Author: ZuoFuRong
Tutor: WeiZhen
School: Tianjin University of Technology
Course: Optical Engineering
Keywords: Metal welds infrared Nondestructive testing Edge extraction Finite element analysis
CLC: TP274.52
Type: Master's thesis
Year: 2011
Downloads: 191
Quote: 0
Read: Download Dissertation

Abstract


With the development of metallurgy, aerospace and machinery industry, welding position status of welding in the production is getting more and more higher. In the process of Welding, various welding defects in the internal of the Workpiece must occur due to the impact of construction and many other factors.These defects must affect the performance of the Workpiece. A more accurate methods to inspect and assess defects is needed. The traditional means of detection is not only slow, and may cause damage to the workpiece.As a new means of detection, infrared nondestructive testing technology is accurate, intuitive and fast. Based on the basic principles of infrared radiation law, It transfers radiation energy into visible light image by means of infrared imaging technology, and determines the existence of internal defects through the analysis of infrared thermography.Infrared nondestructive testing in the detection of defects in metal and nonmetal has a broad market and application value.Compared to other countries, Our country in the infrared technology started later,the technology has not been more widely used. Because the technology is intuitive, portable and high precision, studying and using this technology has a great practical significance.In this paper,we take metal welds as an example.Considering the characteristics of the infrared image, the paper takes measures to procoss the infrared images.The fuzzy theory is applied to extract a more sharp edges, providing the basic conditions for subsequent detectiones.Based on heat transfer theory,the paper use the finite element numerical analysis software ansys simulate a metal plate with different sizes, different locations.At last ,finite element analysis is carried out to provide theoretical foundation for further applications. Work in the following aspects.1.Introduce the theory of infrared nondestructive testing in detail and the principle.2.Analyze the characters of infrared thermal images based on the principle of thermal imaging. in order to get a clear edge,fuzzy mathematical theory is applied to the field of infrared image edge detection in this paper,so that the edges meeting the purpose of qualitative detection of defects are geted.3.Derive one-dimensional heat transfer model combining the heat conduction theory. And introduces the finite element theory, the theory is applied to transient and steady-state thermal analysis.At the last finite element analysis software ansys is carryed out to establishe a model for the transient analysis, the surface temperature distribution are geted. post-processor general-purpose POST1 and POST26 are used analyse the result.

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. EDM Electrode Wear Mechanism and Control Research,TG661
  3. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  4. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  5. Design of Testing Equipment for Electronic Products,TN06
  6. Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
  7. Airborne radar antenna pedestal rapid design systems research and development,TN959.73
  8. Sham hose drum drive means and hydraulic system of the structure,TE973
  9. The magnetorheological damper mechanical properties and Gun Recoil,TB535.1
  10. Nonlinear Structural Dynamics Analysis and Optimization Design on Naval Gun Driver,TJ391
  11. Design and Analysis of Automatic Steel Pipes Butt Tool,U673.38
  12. Optimized Design of New Style Mast of ZJ50L Drill Rig,TE923
  13. Research of Deep Excavation Construction Process for Nearby Subway Section Action,TU753
  14. Study on Geometric Characteristics and Fininte Element Anslysis of Hositing Ropes,TD532
  15. Research on Computerized Double Cylinder Hosiery Machine’s Looping Mechanism Based on Element Finite Analysis,TS183.5
  16. Strength Finite Element Analysis on Crankshaft Based on ANSYS,TK423
  17. Research on the Development of the Digital Mock-up and Functional Simulation of the Entire Cross Section Mechanical Boring Machine,TD421.5
  18. The Finite Element Analysis and Topology Optimization of Kingpin for Bogie,U270.33
  19. Experimental Research on Wetting Deformation of Laterite in Jiangxi,TU446
  20. Study on Deformation and Load Characteristics of the Rigid Net Grid-Small Pile Group Composite Foundation under Rectangular Footings,TU473.1
  21. Research on the Light-Weight Optimization of Disc Brake Structure Based on CAD/CAE Technique,U463.512

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Data processing, data processing system > Automatic detection system using a variety of new technologies > Infrared detector and its equipment
© 2012 www.DissertationTopic.Net  Mobile