Dissertation > Excellent graduate degree dissertation topics show

A Kind of Five Dof Parallel Machamisms with Two Compound Active Legs Study

Author: ZhaoShaoHua
Tutor: LuZuo
School: Yanshan University
Course: Mechanical and Electronic Engineering
Keywords: Parallel manipulator Workspace Movement flexibility Secondary development Kinematics Dynamics Newton-Euler SimMechanics Force-Kinematic actuator
CLC: TP242
Type: Master's thesis
Year: 2011
Downloads: 48
Quote: 0
Read: Download Dissertation

Abstract


Parallel mechanism (PM) has many advantages, such as smaller error, higher stiffness, better bearing capacity and so on compared with series mechanism. Meanwhile its shortcoming is also apparent such as complex structure, small workspace and shortage of movement flexibility, which restrict the application and popularization of PM. A kind of five-DOF PM with composite driving legs is presented in this paper,which is relatively simpler in structure, larger in work space and better exercise flexibility, to some extent, compensates for the deficiencies of the traditional PM, following systematic study of its workspace, exercise flexibility, kinematics and dynamics performance.A symmetrical configuration called 2UPS + UPU PM with large workspace and excllent exercise flexibility is selected from a series of five-DOF PMs which are synthesized using CAD variable geometry. Following the secondary development of Solidworks software based on Visual Basic language, we can transform the steps of constructing workspace into programs using the method of CAD variable geometry. Compared with the four-DOF composite driving PM called RRPU+2UPU, the reachable workspace and exercise flexibility advantages of 2UPS+UPU PM can be reflected obviously.Based on geometry constrains existing in this PM, the inverse analytic positional model of PM can be deduced using the vector method. Following the constrained force analysis, the (6×6) Jacobion matrix and (6×6×6) Hessian matrix can be available without the partial differentiation, and then the analytical models of velocity and acceleration of this PM are gained. With the help of CAD variable geometry approach, the simulation frame model can be builded, which is used to verify the inverse analytic positional model. The analytical model of velocity and acceleration can be checked up through the derivation of simulation solutions based on MATLAB programming.According to the velocity and force duality, the statics model with constrained force can be established. Combined with the virtual work principle and d’Alembert principle, a Newton - Euler dynamics model can be established. A SimMechanics integrated simulation system with Force and Kinematic actuators is established, and the quality and inertia moment parameters of each component can be abtained from a solid model in Solidworks.

Related Dissertations

  1. Study on Characteristics of Contiuous Fiber-Reinforced Metal Matrix Composites under Hypervelocity Projectile Impact,TB332
  2. Modeling Analysis and Slip Estimation for Lunar Rovers,TP242
  3. Reaserch on Dynamics for Fast Walking of Biped Robot,TP242.6
  4. Mechanism Design and Kinematic Simulation of a Celiac Invasive Surgical Robot,TP242.3
  5. Analysis and Control of 6-DOF Electrical Driven Parallel Manipulator,TP242.2
  6. The Drying of Tilapia Fillet Using Supercritical Carbon Dioxide,TS254.4
  7. Influence of Nanostructure on Hydrophobic Properties at TiO2 Surface Studied by Molecular Dynamics Simulation,O614.411
  8. Hydrophilic structure of different types of surface -modified polyurethane material and coagulation 12 factor nine peptide fragments,and fibrinogen P1 fragment of computer simulation of the interaction,O631.3
  9. The Dynamic Performance Analysis of Oil Pumping Center and Structural Optimization of Improvement,TE933.1
  10. Influence of Nitrate Concentrations on the Production of N2, N2O, NO, and CO2 by Soil Cores During Anaerobic Incubation,X131.3
  11. Research on Key Technology of Recycling Horizontal Subsea Pipe Conector,TE973
  12. Study on Combustible Gas Leakageage and Diffusion by CFD Simulation,X937
  13. Water in oil emulsion of water hit the harmonic the demulsification dynamics analysis and its mechanism,X703
  14. Traumatic Brain Injury Patients with White Blood Cells in Peripheral Blood CD34~+ Cells and Content Changes,R651.1
  15. Eleventh National Games men's Triple Jump Triple Jump Technique kinematic analysis,G823.4
  16. Alpine Meadow nitrogen mineralization and microbial Mechanism,S812
  17. With backlash compensation function of radial tire building drum,TQ336.1
  18. Virtual Human Motion Simulation,R318.0
  19. Internal power dynamics of district offices,D630
  20. Non- rigid body system kinematics and dynamics of the collision point,O313.3
  21. Magnetic field spin chain entanglement dynamics of particles in both,O413.1

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Robotics > Robot
© 2012 www.DissertationTopic.Net  Mobile